SHD119222_11

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 777, REV. B SHD119222 SHD119222P SILICON SCHOTTKY RECTIFIER Very Low Forward Voltage Drop Features: Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Maximum Ratings Characteristics Peak Inverse Voltage Max. Average Forward Current Max. Average Forward Current Max. Peak One Cycle NonRepetitive Surge Current Non-Repetitive Avalanche Energy Repetitive Avalanche Current Maximum Thermal Resistance Max. Junction Temperature Max. Storage Temperature Symbol VRWM IF(AV) IF(AV) IFSM EAS IAR R JC Condition 50% duty cycle, rectangular wave form (Single) 50% duty cycle, rectangular wave form (Common Cathode) 8.3 ms, half Sine wave (per leg) TJ = 25 C, IAS = 3.0 A, L = 4.4 mH (per leg) IAS decay linearly to 0 in 1 s limited by TJ max VA=1.5VR (Single) - Max. 45 15 30 200 20 3.0 2.65 -65 to +175 -65 to +175 Units V A A A mJ A C/W C C TJ Tstg Electrical Characteristics Characteristics Max. Forward Voltage Drop (per leg) Max. Reverse Current (per leg) Max. Junction Capacitance (per leg) Symbol VF1 VF2 IR1 IR2 CT Condition @ 15A, Pulse, TJ = 25 C @ 15A, Pulse, TJ = 125 C @VR = 45V, Pulse, TJ = 25 C @VR = 45V, Pulse, TJ = 125 C @VR = 5V, TC = 25 C fSIG = 1MHz, VSIG = 50mV (p-p) Max. 0.73 0.66 0.4 15 800 Units V V mA mA pF 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD119222 SHD119222P SENSITRON TECHNICAL DATA DATA SHEET 777, REV. B MECHANICAL DIMENSIONS: IN Inches / mm SINGLE .145 (3.68) COMMON CATHODE 1 .037 (.94) .030 (.76) Min. .050 (1.27) 2 3 2 1 3 2 .375 (9.53) 1 3 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) LCC-3P .157 (3.99) .415 (10.54) .625 (15.88) PINOUT TABLE DEVICE TYPE PIN 1 PIN 2 SINGLE RECTIFIER CATHODE ANODE COMMON CATHODE COMMON CATHODE ANODE 1 Note: The Vf curves shown are for the SD125SB45 unpackaged die only. Typical Forward Characteristics 102 PIN 3 ANODE ANODE 2 Typical Reverse Characteristics 175 °C Instantaneous Reverse Current - I R (mA) 10 1 150 °C 125 °C 175 °C 100 100 °C 75 °C 50 °C 25 °C Instantaneous Forward Current - I F (A) 10-1 101 10-2 125 °C 10-3 0 10 20 30 Reverse Voltage - R (V) V 40 50 25 °C Junction Capacitance - C T (pF) 800 700 600 500 400 300 200 0 Typical Junction Capacitance 100 0 .2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop -FV(V) 0.8 10 20 30 Reverse Voltage - R (V) V 40 50 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD119222 SHD119222P SENSITRON TECHNICAL DATA DATA SHEET 777, REV. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to impro ve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual proper ty claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulti ng from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applicat ion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulat ions. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com