SHD119512

tSENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 983, REV. - SHD119512 HERMETIC POWER SCHOTTKY RECTIFIER Very Low Forward Voltage Drop DESCRIPTION: A 45 VOLT, 45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC CERAMIC LCC3P PACKAGE. ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE SYMBOL PIV O MAX. 45 45 200 2400 0.47 -65 to + 150 UNITS Volts Amps Amps pF °C/W °C MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC =100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) MAXIMUM THERMAL RESISTANCE MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE IO IFSM CT RθJC Top/ Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) TJ = 25 °C TJ = 125 °C MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) TJ = 25 °C TJ = 125 °C Ir 4.5 210 mA Vf 0.66 0.57 Volts SYMBOL MAX. UNITS • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD119512 SENSITRON DATA SHEET 983, REV. MECHANICAL DIMENSIONS: In Inches / mm SINGLE .145 (3.68) 1 2 3 .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) 1 3 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) TO-254 .157 (3.99) .415 (10.54) .625 (15.88) LCC-3P PINOUT TABLE TYPE SINGLE RECTIFIER PIN 1 CATHODE PIN 2 ANODE PIN 3 ANODE • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •