SHD119622_08

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4044, REV. A SHD119622 HERMETIC POWER SCHOTTKY RECTIFIER Very Low Forward Voltage Drop DESCRIPTION: A 45-VOLT, 120 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC CERAMIC LCC-3P PACKAGE. ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE SYMBOL PIV IO IFSM CT RθJC Top/Tstg MAX. 45 120 500 4800 0.25 -65 to + 175 UNITS Volts Amps Amps pF °C/W °C MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) MAXIMUM THERMAL RESISTANCE MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) TJ = 25 °C TJ = 125 °C MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 120 Amps) TJ = 25 °C MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) TJ = 25 °C TJ = 125 °C Ir 2.4 90 mA Vf 0.90 Volts Vf 0.68 0.58 Volts SYMBOL MAX. UNITS • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • © 2002 Sensitron Semiconductor • SHD119622 SENSITRON TECHNICAL DATA DATA SHEET 4044, REV. A MECHANICAL DIMENSIONS: In Inches / mm SINGLE .145 (3.68) 1 2 3 .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) 1 3 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) TO-254 .157 (3.99) .415 (10.54) .625 (15.88) LCC-3P PINOUT TABLE TYPE PIN 1 PIN 2 SINGLE RECTIFIER CATHODE ANODE Note: The Vf curves shown are for the SD275SB45 un-packaged die only. Typical Forward Characteristics 103 Instantaneous Reverse Current - IR (mA) PIN 3 ANODE Typical Reverse Characteristics 175 °C 102 150 °C 125 °C 100 °C 175 °C 102 101 Instantaneous Forward Current - IF (A) 100 75 °C 10-1 50 °C 10-2 25 °C 125 °C 0 10 20 30 Reverse Voltage - V R (V) 40 50 Typical Junction Capacitance Junction Capacitance - CT (pF) 25 °C 5000 4000 3000 2000 1000 0 10 20 30 Reverse Voltage - V R (V) 40 50 101 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - VF (V) 0.8 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • © 2002 Sensitron Semiconductor • SHD119622 SENSITRON TECHNICAL DATA DATA SHEET 4044, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • © 2002 Sensitron Semiconductor •