SHD122612D

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4662, REV. - SHD122612 SHD122612P SHD122612N SHD122612D HIGH CURRENT HERMETIC SCHOTTKY POWER MODULE DESCRIPTION: A 45 VOLT, 150/120 AMP, POWER SCHOTTKY RECTIFIER IN A POTTED PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT @ TC=100 C (P and N versions) (per device) MAXIMUM DC OUTPUT CURRENT @ TC=100 C (Single and D versions) (per device) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (per leg) (t = 8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE (per leg) MAXIMUM THERMAL RESISTANCE MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE (Vr =5.0V) O O ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED.   SYMBOL PIV IO IO IFSM CT R ¡ MAX. 45 150 120 1000 4800 0.2 -55 to + 150 UNITS Volts Amps Amps Amps pF •C/W •C JC Top/Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 120 Amps) (per leg) TJ = 125 •C MAXIMUM REVERSE CURRENT (Ir @ 45 V PIV) (per leg) TJ = 25 •C Ir TJ = 25 •C Vf 0.72 0.69 9 420 mA Volts TJ = 125 •C œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 Phone (631) 586 7600 Fax (631) 242 9798 œ œ W orld Wide Web Site - www.sensitron.com œ E-Mail Address - sales@sensitron.com œ SHD122612P SHD122612N SHD122612D SENSITRON TECHNICAL DATA DATA SHEET 4662, REV. - MECHANICAL DIMENSIONS: IN Inches / mm 1.27 (32.26 1.23 31.24) 0.370 (9.40 0.330 8.38) 0.64 (16.26 0.60 15.24) 0.720 (18.29 0.680 17.27) 1 0.167 (4.24 Dia 0.147 3.73) 0.070 (1.78 0.050 1.27) 3 Places 2 3 0.50(12.70) Min 0.40(10.16) Typ 0.260(6.61) Max Epoxy Shell Heat Sink 0.180 (4.57 0.140 3.55) PKG. 22 DEVICE TYPE DUAL RECTIFIER/COMMON CATHODE (P) DUAL RECTIFIER/COMMON ANODE (N) DUAL RECTIFIER/DOUBLER (D) Curves below are for die only PINOUT TABLE PIN 1 ANODE 1 CATHODE 1 ANODE PIN 2 COMMON CATHODE COMMON ANODE ANODE/CATHODE Typical Reverse Characteristics 103 Instantaneous Reverse Current - I R (mA) PIN 3 ANODE 2 CATHODE 2 CATHODE Typical Forward Characteristics 102 102 150 ° C 125 ° C 150 ° C 101 100 ° C 75 ° C Instantaneous Forward Current - I F (A) 100 101 50 ° C 10-1 125 ° C 10-2 25 ° C 25 ° C 0 10 20 30 40 Reverse Voltage - V (V) R 50 Junction Capacitance - C T (pF) 100 Typical Junction Capacitance 4500 4000 3500 3000 2500 2000 1500 1000 0 10 20 30 40 Reverse Voltage - V (V) R 50 10-1 0.0 0.2 0.4 0.6 Forward Voltage Drop - VF (V) 0.8 œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 Phone (631) 586 7600 Fax (631) 242 9798 œ œ W orld Wide Web Site - www.sensitron.com œ E-Mail Address - sales@sensitron.com œ SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •