SHD124411_11

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 745, REV. A SHD124411 SHD124411P SHD124411N SHD124411D HERMETIC POWER SCHOTTKY RECTIFIER DESCRIPTION: 30 VOLT, 45/30 AMP, SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE (PER LEG) O ALL RATINGS ARE AT TA = 25 C UNLESS OTHERWISE SPECIFIED SYMBOL PIV IO IO IFSM CT R JC MAX. 30 45 30 200 2200 1.5 -65 to + 150 UNITS Volts Amps Amps Amps pF C/W C MAXIMUM DC OUTPUT CURRENT @ TC=100 C (COMMON CATHODE & COMMON ANODE) MAXIMUM DC OUTPUT CURRENT @ TC=100 C (DOUBLER & SINGLE) PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. (PER LEG) MAXIMUM JUNCTION CAPACITANCE (PER LEG) MAXIMUM THERMAL RESISTANCE (PER LEG) MAXIMUM OPERATING AND STORAGE TEMPERATURE O TJ, stg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM PEAK FORWARD VOLTAGE DROP (PER LEG) (If = 30 AMPS) TA = 25 C TA = 125 C MAXIMUM REVERSE CURRENT Irr @ PIV (PER LEG) TA = 25 C TA = 125 C Irr Vf 0.66 0.56 4.0 200 mA Volts 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD124411 SHD124411P SHD124411N SHD124411D SENSITRON TECHNICAL DATA DATA SHEET 745, REV. A MECHANICAL DIMENSIONS: In Inches / mm .165 (4.19 Dia. .155 3 .94) .695 (17.65 .685 1 7.40) .270 (6.86 .240 6 .10) .045 (1.14 .035 0 .89) .707 (17.96 .697 1 7.70) 1.302 (33.07 1 .202 3 0.53) .835 (21.21 .815 2 0.70) .550 (13.97 .530 1 3.46) 1 2 3 .065 (1.65 .055 1 .40) 3 Plac es .200(5.08) BSC 2 P lac es .140(3.56) BSC TO-258 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER/COMMON CATHODE (P) DUAL RECTIFIER/COMMON ANODE (N) DUAL RECTIFIER DOUBLER (D) Note: Vf curves shown are for die only. Typical Forward Characteristics 103 PIN 1 CATHODE CATHODE ANODE CATHODE/ANODE PIN 2 ANODE ANODE 1 CATHODE 1 ANODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Reverse Characteristics Instantaneous Reverse Current - I R (mA) 150 °C 102 150 °C 125 °C 101 100 °C 75 °C Instantaneous Forward Current - I F (A) 101 100 50 °C 10-1 25 °C 10 -2 125 °C 0 100 10 20 30 Reverse Voltage - R (V) V 40 25 °C Junction Capacitance - C T (pF) 2000 1800 1600 1400 1200 1000 0 Typical Junction Capacitance 10-1 0 .0 0.1 0.2 0.3 0.4 0.5 Forward Voltage Drop -FV(V) 0.6 10 20 30 Reverse Voltage - R (V) V 40 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SHD124411 SHD124411P SHD124411N SHD124411D SENSITRON TECHNICAL DATA DATA SHEET 745, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the late st version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsib ility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applic ation will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. When exporting these products (technologies), the necessary procedures are to be taken in accordance w ith related laws and regulations. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com