SHD124436P

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1191, REV. A SHD124436 SHD124436P SHD124436N SHD124436D ULTRA LOW REVERSE LEAKAGE POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: A 200 VOLT, 30/45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC) Single / Doubler Common Cathode / Common Anode MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine Wave) (per leg) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) MAXIMUM THERMAL RESISTANCE Dual Rectifier Common Cathode / Common Anode / Doubler Single Rectifier MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE Top IFSM CT RθJC 0.39 0.77 -65 to + 175 °C ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV IO MAX. 200 30 45 200 600 UNITS Volts Amps Amps pF °C/W ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 30 Amps) (per leg) TJ = 25 °C TJ = 125 °C MAXIMUM REVERSE CURRENT (Ir @ 200V PIV) (per leg) TJ = 25 °C TJ = 125 °C Ir 0.2 2.0 mA Vf 1.09 0.93 Volts SYMBOL MAX. UNITS • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON DATA SHEET 1191, REV. A MECHANICAL DIMENSIONS: In Inches / mm .165 (4.19 Dia. .155 3.94) .695 (17.65 .685 17.40) .270 (6.86 .240 6.10) .045 (1.14 .035 0.89) SHD124436 SHD124436P SHD124436N SHD124436D SINGLE COMMON CATHODE .707 (17.96 .697 17.70) 1.302 (33.07 1.202 30.53) .835 (21.21 .815 20.70) 1 .550 (13.97 .530 13.46) 2 3 1 2 DOUBLER 3 COMMON ANODE 1 2 3 1 .065 (1.65 .055 1.40) 3 Places .200(5.08) BSC 2 Places .140(3.56) BSC 2 3 3 2 1 TO-258 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DOUBLER (D) Vf curves are for bare die only. PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Forward Characteristics 101 Instantaneous Reverse Current - I R (mA) Typical Reverse Characteristics 200 °C 175 °C 150 °C 100 101 200 °C 175 °C 10-1 125 °C 100 °C 75 °C Instantaneous Forward Current - I F (A) 10-2 10-3 100 50 °C 10-4 25 °C 10-5 125 °C 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 10-1 Junction Capacitance - CT (pF) Typical Junction Capacitance 25 °C 600 450 300 150 0 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 10-2 0.0 0.2 0.4 0.6 0.8 Forward Voltage Drop - V F (V) 1.0 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON DATA SHEET 1191, REV. A SHD124436 SHD124436P SHD124436N SHD124436D DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com •