SHD124522

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4053, REV. A SHD124522 SHD124522P SHD124522N SHD124522D POWER SCHOTTKY RECTIFIER Very Low Voltage Drop FEATURES: Available Screened to Mil-S-19500, TX, TXV and S Levels Add “C” for ceramic seals (example: SHDC124522) DESCRIPTION: 45 VOLT, 45 AMP POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT @ TC=100 C MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) (per leg) ¢ ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. ¡ SYMBOL PIV O MAX. 45 45 200 UNITS Volts Amps Amps IO IFSM MAXIMUM THERMAL RESISTANCE (per leg) MAXIMUM JUNCTION TEMPERATURE RANGE MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE R JC 0.72 -65 to + 175 -65 to + 175 •C/W •C •C Top Tstg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) (per leg) TJ = 125 •C MAXIMUM REVERSE CURRENT (Ir @ 45V PIV) (per leg) TJ = 25 •C TJ = 25 •C Vf 0.86 0.77 1.2 45 CT 2400 pF mA Volts Ir TJ = 125 •C MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg)   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com               SHD124522 SHD124522P SHD124522N SHD124522D SENSITRON DATA SHEET 4053, REV. MECHANICAL DIMENSIONS: In Inches / mm .165 (4.19 Dia. .155 3.94) .695 (17.65 .685 17.40) .270 (6.86 .240 6.10) .045 (1.14 .035 0.89) SINGLE COMMON CATHODE 1 .707 (17.96 .697 17.70) 1.302 (33.07 1.202 30.53) .835 (21.21 .815 20.70) .550 (13.97 .530 13.46) 2 3 1 2 DOUBLER 3 COMMON ANODE 1 2 3 1 2 3 3 2 1 .065 (1.65 .055 1.40) 3 Places .200(5.08) BSC 2 Places .140(3.56) BSC TO-258 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DOUBLER (D) Note: Vf curves are for die only Typical Forward Characteristics 10 2 PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Reverse Characteristics 103 Instantaneous Reverse Current - I R (mA) 102 175 ° C 150 ° C 101 175 ° C Instantaneous Forward Current - I F (A) 125 ° C 100 ° C 75 ° C 100 10-1 50 ° C 10 -2 25 ° C 125 ° C 10-3 0 10 20 30 40 Reverse Voltage - VR (V) 50 10 1 25 ° C Junction Capacitance - CT (pF) 2500 2000 1500 1000 500 0 Typical Junction Capacitance 0.2 0.4 0.6 0.8 1.0 Forward Voltage Drop - V F (V) 1.2 10 20 30 40 Reverse Voltage - VR (V) 50   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •