SHD124535N

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 762, REV. B SHD124535 SHD124535P SHD124535N SHD124535D ULTRA LOW REVERSE LEAKAGE POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: A 150 VOLT, 45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV O MAX. 150 45 200 UNITS Volts Amps Amps MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) (per leg) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg) MAXIMUM THERMAL RESISTANCE (per leg) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE MAXIMUM JUNCTION TEMPERATURE RANGE IO IFSM CT R JC 1500 1.15 -65 to + 175 -65 to +200 pF C/W C C Top/ Tstg Tjc ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) (per leg) TJ = 25 C TJ = 125 C MAXIMUM REVERSE CURRENT (Ir @ 150V PIV) (per leg) TJ = 25 C TJ = 125 C Ir 1.5 20 mA Vf 1.10 0.92 Volts SYMBOL MAX. UNITS 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com SENSITRON DATA SHEET 762, REV. B MECHANICAL DIMENSIONS: In Inches / mm .165 (4.19 Dia. .155 3 .94) .695 (17.65 .685 1 7.40) .270 (6.86 .240 6 .10) .045 (1.14 .035 0 .89) SHD124535 SHD124535P SHD124535N SHD124535D SINGLE COMMON CATHODE 1 .707 (17.96 .697 1 7.70) 1.302 (33.07 1 .202 3 0.53) .835 (21.21 .815 2 0.70) .550 (13.97 .530 1 3.46) 2 3 1 2 DOUBLER 3 COMMON ANODE 1 2 3 1 2 3 1 2 3 .065 (1.65 .055 1 .40) 3 Plac es .200(5.08) BSC 2 P lac es .140(3.56) BSC TO-258 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DOUBLER (D) PIN 1 CATHODE ANODE 1 CATHODE 1 CATHODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 ANODE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior no tice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sa les department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other ca use during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits desc ribed in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulti ng from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, i n any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 2000 Sensitron Semiconductor 221 West Industry Court Deer Park, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 www.sensitron.com sales@sensitron.com