SHD124536_08

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 390, REV. B SHD124536 SHD124536P SHD124536N ULTRA LOW REVERSE LEAKAGE POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: 200 VOLT, 45 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-258 PACKAGE. ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE SYMBOL PIV IO IFSM MAX. 200 45 200 UNITS Volts Amps Amps MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 OC) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) (per leg) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg) MAXIMUM THERMAL RESISTANCE (per leg) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE CT RθJC Top Tstg 900 0.50 -65 to + 200 -65 to + 175 pF °C/W °C °C ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 45 Amps) (per leg) TJ = 25 °C TJ = 125 °C MAXIMUM REVERSE CURRENT (Ir @ 200V PIV) (per leg) TJ = 25 °C TJ = 125 °C REVERSE RECOVERY TIME trr Ir 0.3 3.0 32 ns mA Vf 1.18 1.02 Volts • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD124536 SHD124536P SHD124536N SENSITRON DATA SHEET 390, REV. B MECHANICAL DIMENSIONS: In Inches / mm .165 (4.19 Dia. .155 3.94) .695 (17.65 .685 17.40) .270 (6.86 .240 6.10) .045 (1.14 .035 0.89) SINGLE COMMON CATHODE 1 .707 (17.96 .697 17.70) 1.302 (33.07 1.202 30.53) .835 (21.21 .815 20.70) .550 (13.97 .530 13.46) 2 3 1 2 3 COMMON ANODE 1 2 3 1 .065 (1.65 .055 1.40) 3 Places .200(5.08) BSC 2 Places .140(3.56) BSC 2 3 TO-258 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) Typical Forward Characteristics 102 PIN 1 CATHODE ANODE 1 CATHODE 1 PIN 2 ANODE COMMON CATHODE COMMON ANODE PIN 3 ANODE ANODE 2 CATHODE 2 Typical Reverse Characteristics 200 °C Instantaneous Reverse Current - I R (mA) 101 175 °C 150 °C 125 °C 100 200 °C 10 Instantaneous Forward Current - I F (A) 1 175 °C 10 -1 100 °C 75 °C 10-2 50 °C 10-3 100 125 °C 10-4 0 40 25 °C 80 120 160 200 Reverse Voltage - VR (V) 240 25 °C Junction Capacitance - CT (pF) 800 600 400 200 0 0 Typical Junction Capacitance 10-1 10-2 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Forward Voltage Drop - VF (V) 1.4 40 80 120 160 200 Reverse Voltage - VR (V) 240 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD124536 SHD124536P SHD124536N SENSITRON DATA SHEET 390, REV. B DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com •