SHD125136N

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 842, REV. A SHD125136 SHD125136P SHD125136N SHD125136D HERMETIC POWER SCHOTTKY RECTIFIER Low Forward Voltage Drop (200 V, 15 A) Applications: Features: œ œ œ œ œ œ œ œ Switching Power Supply œ Converters œ Free-Wheeling Diodes œ Polarity Protection Diode Soft Reverse Recovery at Low and High Temperature Low Forward Voltage Drop Low Reverse Leakage Current Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Symbol VRWM IF(AV) IF(AV) Condition 50% duty cycle @TC =100° C, rectangular wave form (Single & Doubler versions) 50% duty cycle @TC =100° C, rectangular wave form (Common Cathode & Common Anode versions) 8.3 ms, half Sine pulse TJ = 25 •C, IAS = 0.5 A L =60 mH IAS decay linearly to 0 in 1 ms ‹ limited by TJ max VA=1.5VR Condition @ 7.5 A, Pulse, TJ = 25 •C @ 7.5 A, Pulse, TJ = 125 •C @VR = 200V, Pulse, TJ = 25 •C @VR = 200V, Pulse, TJ = 125 •C @VR = 5V, TC = 25 •C fSIG = 1MHz, VSIG = 50mV (p-p) IF = 0.5 A, IR = 1.0 A, IRM = 0.25 A, TJ = 25 •C Max. 200 7.5 15 Units V A A Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current (whole device) Max. Average Forward Current (whole device) Max. Peak One Cycle NonRepetitive Surge Current (per leg) Non-Repetitive Avalanche Energy (per leg) Repetitive Avalanche Current (per leg) Max. Junction Temperature Max. Storage Temperature IFSM EAS IAR TJ Tstg Symbol VF1 VF2 IR1 IR2 75 7.5 0.5 -65 to +200 -65 to +200 Max. 1.01 0.88 0.18 4.0 150 2.73 25 A mJ A •C •C Units V V mA mA pF •C/W nsec Electrical Characteristics: Characteristics Max. Forward Voltage Drop (per leg) Max. Reverse Current (per leg) Max. Junction Capacitance (per leg) Maximum Thermal Resis. (per leg) Max. Reverse Recovery Time CT R   JC trr œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ œ W orld Wide Web Site - http://www.sensitron.com œ E-Mail Address - sales@sensitron.com œ SHD125136 SHD125136P SHD125136N SHD125136D TECHNICAL DATA DATA SHEET 842, REV. Mechanical Dimensions: In Inches / mm .149 (3.78 Dia. .139 3.53) .545 (13.84 .535 13.60) .260 .249 .050 .040 (6.60 6.32) (1.27 1.02) SINGLE COMMON CATHODE 1 2 3 1 2 DOUBLER 3 .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) COMMON ANODE 1 2 3 1 .045 (1.14 .035 0.89) 3 Places .150(3.81) BSC 2 Places .150(3.81) BSC 2 3 3 2 1 TO-254 PINOUT TABLE TYPE PIN 1 SINGLE RECTIFIER CATHODE DUAL RECTIFIER, COMMON CATHODE (P) ANODE 1 DUAL RECTIFIER, COMMON ANODE (N) CATHODE 1 DUAL RECTIFIER, DOUBLER (D) ANODE Note: The Vf curves shown are for the un-packaged die only. Typical Forward Characteristics 101 Instantaneous Reverse Current - I R (mA) PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Reverse Characteristics 200 ° C 175 ° C 150 ° C 10-1 101 100 200 ° C 175 ° C 125 ° C 100 ° C 75 ° C 50 ° C 10-2 Instantaneous Forward Current - I F (A) 10 0 10-3 10-4 25 ° C 125 ° C 10-5 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 25 ° C Junction Capacitance - CT (pF) 10-1 Typical Junction Capacitance 120 80 40 0 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 10-2 0.1 0.3 0.5 0.7 0.9 Forward Voltage Drop - V F (V) 1.1 œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ œ W orld Wide Web Site - http://www.sensitron.com œ E-Mail Address - sales@sensitron.com œ SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •