SHD125236D

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 387, REV. B SHD125236 SHD125236P SHD125236N SHD125236D ULTRA LOW REVERSE LEAKAGE POWER SCHOTTKY RECTIFIER Very Low Voltage Drop DESCRIPTION: A 200 VOLT, 30 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-254 PACKAGE. ¡ MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE ALL RATINGS ARE @ TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV O MAX. 200 15 30 150 UNITS Volts Amps Amps Amps MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) (SINGLE & DOUBLER) MAXIMUM DC OUTPUT CURRENT (With Cathode Maintained @ TC=100 C) (COMMON CATHODE & COMMON ANODE) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t = 8.3ms, Sine) (per leg) MAXIMUM JUNCTION CAPACITANCE (Vr =5V) (per leg) MAXIMUM THERMAL RESISTANCE (Junction to Mounting Surface, Cathode) (per leg) MAXIMUM OPERATING TEMPERATURE RANGE MAXIMUM STORAGE TEMPERATURE RANGE ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 15 Amps) (per leg) TJ = 125 •C MAXIMUM REVERSE CURRENT (Ir @ 200V PIV) (per leg) TJ = 25 •C TJ = 25 •C O IO IO IFSM CT ¢ 300 1.7 -65 to + 200 -65 to + 175 pF •C/W •C •C R JC Top Tstg SYMBOL MAX. UNITS Vf 1.01 0.85 0.015 1.0 25 Volts Ir *trr mA ns TJ = 125 •C REVERSE RECOVERY TIME (IF = 0.5A, IR = 1.0A, IRM = 0.25 A, TJ = 25•C) *Due to the nature of the 200V Schottky devices, some degradation in trr performance at high temperatures should be expected, unlike conventional lower voltage Schottkys.   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON DATA SHEET 387, REV. A MECHANICAL DIMENSIONS: In Inches / mm .149 (3.78 Dia. .139 3.53) .545 (13.84 .535 13.60) .260 .249 .050 .040 (6.60 6.32) (1.27 1.02) SHD125236 SHD125236P SHD125236N SHD125236D SINGLE COMMON CATHODE .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) 1 2 3 1 2 DOUBLER 3 1 2 3 COMMON ANODE 1 .045 (1.14 .035 0.89) 3 Places .150(3.81) BSC 2 Places .150(3.81) BSC 2 3 3 2 1 TO-254 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DOUBLER (D) PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Forward Characteristics 101 Instantaneous Reverse Current - IR (mA) Typical Reverse Characteristics 200 ° C 100 10-1 -2 101 175 ° C 150 ° C 125 ° C 200 ° C 175 ° C Instantaneous Forward Current - IF (A) 10 100 ° C 75 ° C 50 ° C 25 ° C 100 10-3 10-4 10-5 0 40 125 ° C 10 -1 80 120 160 200 Reverse Voltage - VR (V) 240 Typical Junction Capacitance 25 ° C Junction Capacitance - CT (pF) 300 240 180 120 60 0 0 40 80 120 160 Reverse Voltage - VR (V) 200 240 10-2 0.0 0.2 0.4 0.6 0.8 Forward Voltage Drop - VF (V) 1.0   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •