SHD125244DB

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4041, REV. - SHD125244B SHD125244PB SHD125244NB SHD125244DB SINGLE / DUAL COMMON CATHODE, COMMON ANODE, DOUBLER HERMETIC POWER SCHOTTKY RECTIFIER 200•C Maximum Operation Temperature DESCRIPTION: A 100 VOLT, 30 AMP POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-254 PACKAGE.   MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT (TC = 100 •C) (SINGLE / DOUBLER) MAXIMUM DC OUTPUT CURRENT (TC = 100 •C) (COMMON CATHODE / COMMON ANODE) ALL RATINGS ARE AT TC = 25 C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV IO IO IFSM CT ¡ MAX. 100 15 30 150 500 1.45 0.72 -65 to +200 UNITS Volts Amps Amps Amps pF •C/W •C/W •C MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) (per leg) JUNCTION CAPACITANCE VR = 5Vdc (per leg) MAXIMUM THERMAL RESISTANCE (SINGLE) MAXIMUM THERMAL RESISTANCE MAXIMUM OPERATING TEMPERATURE RANGE R ¡ JC JC R Top/stg ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP (IF = 15A) (per leg) TJ = 25 •C SYMBOL Vf MAX. 0.93 0.77 Ir 0.35 8.0 mA UNITS Volts TJ = 125 •C MAXIMUM REVERSE CURRENT (Ir @ PIV) (per leg) TJ = 25 •C TJ = 125 •C œ 221 WEST INDUSTRY COURT œ DEER PARK, NY 11729-4681 œ PHONE (631) 586-7600 œ FAX (631) 242-9798 œ œ W orld Wide Web Site - http://www.sensitron.com œ E-mail Address - sales@sensitron.com œ SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4041, REV. MECHANICAL DIMENSIONS: In Inches / mm SHD125244B SHD125244PB SHD125244NB SHD125244DB TO-254 .149 (3.78 Dia. .139 3.53) .545 (13.84 .535 13.60) .260 .249 .050 .040 (6.60 6.32) (1.27 1.02) .685 (17.40 .665 16.89) .870 (22.10 .840 21.34) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) .060(1.52)R .180(4.57) 1 2 3 .150(3.81) BSC .045 (1.14 .035 0.89) 3 Places .150(3.81) BSC .250(6.35) Min 2 Places PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DOUBLER (D) Vf curves shown are for die only. Typical Forward Characteristics PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Reverse Characteristics 101 Instantaneous Reverse Current - I R (mA) 200 ° C 175 ° C 10 0 150 ° C 125 ° C 100 ° C 10 1 200 ° C 175 ° C 10-1 Instantaneous Forward Current - I F (A) 10-2 75 ° C 50 ° C 10 0 10-3 10-4 25 ° C 125 ° C 0 20 40 60 80 100 Reverse Voltage - VR (V) 120 10 -1 Junction Capacitance - C T (pF) 25 ° C Typical Junction Capacitance 400 300 200 100 0 20 40 60 80 Reverse Voltage - VR (V) 100 120 10-2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - VF (V) 0.8 œ 221 WEST INDUSTRY COURT œ DEER PARK, NY 11729-4681 œ PHONE (631) 586-7600 œ FAX (631) 242-9798 œ œ W orld Wide Web Site - http://www.sensitron.com œ E-mail Address - sales@sensitron.com œ SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •