SHD125622_08

SHD125622 SENSITRON SEMICONDUCTOR TECHNICAL DATA DATASHEET 4739, REV. A HERMETIC POWER SCHOTTKY RECTIFIER 175°C Maximum Operation Temperature DESCRIPTION: A 45-VOLT, 35 AMP, POWER SCHOTTKY RECTIFIER IN A HERMETIC TO-254 PACKAGE. ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE SYMBOL PIV IO IFSM CT RθJC Top/Tstg Top/Tstg MAX. 45 35 150 4800 0.33 -65 to + 175 -65 to + 175 UNITS Volts Amps Amps pF °C/W °C °C MAXIMUM DC OUTPUT CURRENT (@ TC=100 OC) (Single, Doubler) MAXIMUM NONREPETITIVE FORWARD SURGE CURRENT (t=8.3ms, Sine) MAXIMUM JUNCTION CAPACITANCE MAXIMUM THERMAL RESISTANCE (Single) MAXIMUM OPERATING TEMPERATURE RANGE MAXIMUM STORAGE TEMPERATURE RANGE (Vr =5V) ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP, Pulsed (If = 35 Amps) TJ = 25 °C TJ = 125 °C MAXIMUM REVERSE CURRENT (Ir @ 45 V PIV) TJ = 25 °C TJ = 125 °C Ir 2.4 90 mA Vf 0.73 0.62 Volts SYMBOL MAX. UNITS ©2004 Sensitron Semiconductor • 221 West Industry Court • Deer Park, NY 11729-4681 Phone (631) 586-7600 • Fax (631) 242-9798 • www.sensitron.com • sales@sensitron.com SHD125622 SENSITRON TECHNICAL DATA DATASHEET 4739, REV. A Mechanical Dimensions: In inches / mm .149 (3.78 Dia. .139 3.53) .545 (13.84 .535 13.60) .260 .249 .050 .040 (6.60 6.32) (1.27 1.02) SINGLE .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) 1 2 3 1 2 3 TO-254 .045 (1.14 .035 0.89) 3 Places .150(3.81) BSC 2 Places .150(3.81) BSC PINOUT TABLE TYPE SINGLE RECTIFIER Curves shown are for bare die only. Typical Forward Characteristics PIN 1 CATHODE PIN 2 ANODE PIN 3 ANODE Typical Reverse Characteristics 103 Instantaneous Reverse Current - IR (mA) 175 °C 102 150 °C 125 °C 100 °C 175 °C 102 101 Instantaneous Forward Current - IF (A) 10 0 75 °C 10-1 50 °C 10-2 25 °C 125 °C 0 10 20 30 Reverse Voltage - VR (V) 40 50 Typical Junction Capacitance Junction Capacitance - CT (pF) 25 °C 5000 4000 3000 2000 1000 0 10 20 30 Reverse Voltage - VR (V) 40 50 101 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - VF (V) 0.8 ©2004 Sensitron Semiconductor • 221 West Industry Court • Deer Park, NY 11729-4681 Phone (631) 586-7600 • Fax (631) 242-9798 • www.sensitron.com • sales@sensitron.com SHD125622 SENSITRON TECHNICAL DATA DATASHEET 4739, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. ©2004 Sensitron Semiconductor • 221 West Industry Court • Deer Park, NY 11729-4681 Phone (631) 586-7600 • Fax (631) 242-9798 • www.sensitron.com • sales@sensitron.com