SHD126222N

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 872, REV. B Formerly SHD1262 / P / N / D SHD126222 SHD126222P SHD126222N SHD126222D HERMETIC POWER SCHOTTKY RECTIFIER Applications: • Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode Features: • Low Reverse Leakage Current • Soft Reverse Recovery at Low and High Temperature • Low Forward Voltage Drop • Low Power Loss, High Efficiency • High Surge Capacity • Guard Ring for Enhanced Durability and Long Term Reliability • Guaranteed Reverse Avalanche Characteristics ALL RATINGS ARE AT TA = 25 °C UNLESS OTHERWISE SPECIFIED. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM DC OUTPUT CURRENT (TC = 100 °C) (Single / Doubler) MAXIMUM DC OUTPUT CURRENT (TC = 100 °C) (Common Cathode / Common Anode) PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. (PER LEG) MAXIMUM THERMAL RESISTANCE (Single / Doubler) (Common Cathode / Common Anode) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE ELECTRICAL CHARACTERISTICS CHARACTERISTICS MAXIMUM FORWARD VOLTAGE DROP Common Cathode Per Leg IF = 15A, TA = 25 0C IF = 15A,TA = 125 C MAXIMUM FORWARD VOLTAGE DROP Common Anode / Doubler Per Leg IF = 15A, TA = 25 0C IF = 15A,TA = 125 C MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) TA = 25 0C TA = 125 0C JUNCTION CAPACITANCE VR = 10Vdc, f = 1mHz VSIG = 50mV (p-p) (Max) (PER LEG) (Curves are for bare die only. SD125SB45A) • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - www.sensitron.com • E-mail Address - sales@sensitron.com • 0 0 SYMBOL PIV IO IO IFSM RθJC Top, Tstg MAX. 45 15 16 75 1.45 0.72 -65 to +175 UNITS Volts Amps Amps Amps °C/W °C SYMBOL MAX. UNITS Vf 0.78 0.71 Volts Vf 0.81 0.76 Volts Ir 0.4 15 mA mA pF CJ 800 SENSITRON TECHNICAL DATA DATA SHEET 872, REV. B Mechanical Dimensions: In Inches / mm .150 (3.81 Dia. .140 3.56) .420 (10.67 .410 10.41) .200 (5.08 .190 4.82) .045 (1.14 .035 0.89) SHD126222 SHD126222P SHD126222N SHD126222D SINGLE COMMON CATHODE 1 2 3 1 2 DOUBLER 3 .537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21) .665 (16.89 .645 16.38) COMMON ANODE .430 (10.92 .410 10.41) 1 2 3 1 2 3 3 2 1 .035 (0.89 .025 0.63) 3 Places .100(2.54) BSC 2 Places .120(3.05) BSC TO-257 PINOUT TABLE TYPE SINGLE RECTIFIER DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) DUAL RECTIFIER, DOUBLER (D) Typical Forward Characteristics PIN 1 CATHODE ANODE 1 CATHODE 1 ANODE PIN 2 ANODE COMMON CATHODE COMMON ANODE ANODE/CATHODE PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Reverse Characteristics 102 175 °C Instantaneous Reverse Current - I R (mA) 10 1 150 °C 125 °C 175 °C 100 100 °C 10-1 Instantaneous Forward Current - I F (A) 75 °C 50 °C 101 10-2 25 °C 10-3 125 °C 0 10 20 30 Reverse Voltage - VR (V) 40 50 25 °C Junction Capacitance - CT (pF) 800 700 600 500 400 300 200 0 Typical Junction Capacitance 100 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - VF (V) 0.8 10 20 30 Reverse Voltage - VR (V) 40 50 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON TECHNICAL DATA DATA SHEET 872, REV. B SHD126222 SHD126222P SHD126222N SHD126222D DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - www.sensitron.com • E-mail Address - sales@sensitron.com •