SHD126244N

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 654, REV. A SHD126244 SHD126244P SHD126244N SHD126244D HERMETIC POWER SCHOTTKY RECTIFIER Very Low Forward Voltage Drop Ultra Low Reverse Leakage 200°C Operating Temperature Applications: • Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode Features: • • • • • • • • Soft Reverse Recovery at Low and High Temperature Very Low Forward Voltage Drop Ultra Low Reverse Leakage Low Power Loss, High Efficiency High Surge Capacity Guard Ring for Enhanced Durability and Long Term Reliability Guaranteed Reverse Avalanche Characteristics Out Performs 100 Volt Ultrafast Rectifiers Maximum Ratings: Characteristics Peak Inverse Voltage Max. Average Forward Current Max. Peak One Cycle NonRepetitive Surge Current Non-Repetitive Avalanche Energy Repetitive Avalanche Current Max. Thermal Resistance Max. Junction Temperature Max. Storage Temperature Symbol VRWM IF(AV) IFSM EAS IAR RθJC TJ Tstg Condition 50% duty cycle, rectangular wave form 8.3 ms, half Sine wave TJ = 25 °C, IAS = 0.53 A, L = 56 mH IAS decay linearly to 0 in 1 µs ƒ limited by TJ max VA=1.5VR (per leg) Max. 100 15 75 8.0 0.53 2.1 -65 to +200 -65 to +200 Units V A A mJ A °C/W °C °C Electrical Characteristics: Characteristics Max. Forward Voltage Drop Symbol VF1 VF2 Max. Reverse Current IR1 IR2 Max. Junction Capacitance CT Condition @ 15A, Pulse, TJ = 25 °C (per leg) @ 15A, Pulse, TJ = 125 ° C (per leg) @V R = 100V, Pulse, TJ = 25 °C (per leg) @V R = 100V, Pulse, TJ = 125 ° C (per leg) @V R = 5V, TC = 25 °C fSIG = 1MHz, VSIG = 50mV (p-p) (per leg) Max. 0.93 0.77 0.35 8.0 500 Units V V mA mA pF • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • TECHNICAL DATA DATA SHEET 654, REV. A Mechanical Dimensions: In Inches / mm .150 (3.81 .140 3.56) .200 (5.08 Dia. .420 (10.67 .410 10.41) .190 4.82) .045 (1.14 .035 0.89) SHD126244 SHD126244P SHD126244N SHD126244D SINGLE COMMON CATHODE １ ２ ３ １ ２ DOUBLER ３ .537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21) .665 (16.89 .645 16.38) COMMON ANODE .430 (10.92 .410 10.41) 1 2 3 １ .035 (0.89 .025 0.63) 3 Places .100(2.54) BSC 2 Places .120(3.05) BSC ２ ３ １ ２ ３ TO-257 PINOUT TABLE TYPE PIN 1 PIN 2 SINGLE RECTIFIER CATHODE ANODE DUAL RECTIFIER, COMMON CATHODE (P) ANODE 1 COMMON CATHODE DUAL RECTIFIER, COMMON ANODE (N) CATHODE 1 COMMON ANODE DUAL RECTIFIER, DOUBLER (D) ANODE ANODE/CATHODE Note: The Vf curves shown are for the SD125SC200 unpackaged die only. PIN 3 ANODE ANODE 2 CATHODE 2 CATHODE Typical Forward Characteristics 101 R (mA) Typical Reverse Characteristics 200 °C 175 °C 100 10 1 200 °C 175 °C Instantaneous Reverse Current - I 150 °C 125 °C 100 °C 10 -1 (A) 10 Instantaneous Forward Current - I F -2 75 °C 50 °C 10 -3 10 0 10 -4 25 °C 125 °C 0 20 40 60 80 Reverse Voltage - V R (V) 100 120 Typical Junction Capacitance 10 -1 25 °C T (pF) Junction Capacitance - C 400 300 200 100 0 20 40 60 80 Reverse Voltage - V R (V) 100 120 0.8 10 -2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Forward Voltage Drop - V F (V) • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •