SHD219451_08

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 338, REV C SHD219451 HERMETIC POWER MOSFET P-CHANNEL FEATURES: • 55 Volt, 0.024, Ohm MOSFET • Isolated and Hermetically Sealed • Surface Mount Package MAXIMUM RATINGS ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID IDM TOP/TSTG RθJC PD MIN. -55 TYP. MAX. ±20 -74 -52 -260 +175 0.75 200 UNITS Volts Amps Amps °C °C/W Watts RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT VGS = -10V, TC = 25°C VGS = -10V, TC = 100°C PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE TERMAL RESISTANCE JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25°C ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = -1.0mA DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = -38A VGS = 10V, ID = -38A, TC = 125°C GATE THRESHOLD VOLTAGE VDS = VGS, ID = -250µA FORWARD TRANSCONDUCTANCE VDS ≥ 10V, ID = -38A ZERO GATE VOLTAGE DRAIN CURRENT, TJ = 25°C (VDS = -44V, VGS = 0V), TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TOTAL GATE CHARGE VGS = -10V, GATE TO SOURCE CHARGE VDS = -44V, GATE TO DRAIN CHARGE ID = 5.5A TURN ON DELAY TIME VDD = -28V, RISE TIME ID = -38A, TURN OFF DELAY TIME RG = 2.5Ω, FALL TIME VGS ≥ 10V DIODE FORWARD VOLTAGE TJ = 25°C,IS = -38V VGS = 0V REVERSE RECOVERY TIME TJ = 25°C, IS = -10A, di/dt ≤ = -100A/µsec, REVERSE RECOVERY CHARGE VDD ≤ 30V INPUT CAPACITANCE VGS = 0V, VDS = 25V, OUTPUT CAPACITANCE f = 1.0MHz REVERSE TRANSFER CAPACITANCE BVDSS -50 RDS(ON) VGS(th) gfs IDSS IGSS Qg Qgs Qgd td(ON) tr td(OFF) tf VSD trr Qrr Ciss Coss Crss 2.0 21 0.024 0.042 4.0 25 250 100 -100 180 32 86 Volts Ω Volts S(1/Ω) µA nA nC - - 18 99 61 96 130 350 3400 1400 640 nsec 1.4 - Volts nsec µC pF • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD219451 SENSITRON DATA SHEET 338 REVISION C MECHANICAL DIMENSIONS: in Inches / mm .145 (3.68) .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) 1 3 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) .415 (10.54) .625 (15.88) .157 (3.99) LCC-3P PINOUT TABLE DEVICE TYPE P-CHANNEL MOSFET LCC-3P PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE SCHEMATIC • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD219451 SENSITRON DATA SHEET 338 REVISION C DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com •