SHD219504

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 607, REV A SHD219504 HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 400 Volt, 0.3 Ohm, 9.0A MOSFET • Low RDS (on) • Equivalent to IRF350 Series MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID ID TOP/TSTG PD RthJC MIN. -55 TYP. MAX. ±20 14 9.0 +150 347 0.36 UNITS Volts Amps Amps °C Watts °C/W RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT @ T C = 2 5° C ON-STATE DRAIN CURRENT @ TC = 100°C OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION @ TC = 25°C THERMAL RESISTANCE, JUNCTION TO CASE ELECTRICAL CHARACTERISTICS CHARACTERISTIC DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0mA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 9.0A VGS = 10V, ID = 14A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 0.25mA ZERO GATE VOLTAGE DRAIN CURRENT VDS = Max. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 200V, RISE TIME ID = 14A, TURN OFF DELAY TIME RG = 2.2Ω FALL TIME TOTAL GATE CHARGE ID = 14A, GATE TO SOURCE CHARGE VGS = 10V, GATE TO DRAIN CHARGE VDS =0.5xMax. Rating DIODE FORWARD VOLTAGE TC = 25°C, IS = 14A, VGS = 0V REVERSE RECOVERY CHARGE TJ = 25°C, di/dt = 100A/μsec, VDD = 50V REVERSE RECOVERY TIME TJ = 25°C, IF = 14A, di/dt = 100A/μsec, VDD = 50V INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz SYMBOL BVDSS MIN. 400 TYP. MAX. 0.3 0.4 4.0 250 1000 100 -100 35 190 170 130 110 18 65 1.7 11 1200 Ciss Coss Crss 2600 680 250 nsec UNITS Volts Ω RDS(ON) VGS(th) IDSS IGSS td(ON) tr td(OFF) tf Qg Qgs Qgd VSD QRR trr 2.0 Volts μA nA 52 5.0 25 - - nsec nC nC nC Volts μC - - pF © 2001 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • sales@sensitron.com • SHD219504 SENSITRON DATA SHEET 607, REVISION A MECHANICAL DIMENSIONS: in Inches / mn .145 (3.68) .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) 1 3 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) .415 (10.54) .625 (15.88) .157 (3.99) LCC-3P PINOUT TABLE PIN 1 N CHANNEL MOSFET IN AN LCC-3P PACKAGE DRAIN PIN 2 SOURCE PIN 3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. © 2001 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • www.sensitron.com • sales@sensitron.com •