SHD224805

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 5159, REV. - SHD224805 HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 600 Volt, 60A, 55 milli-Ohm • Isolated Hermetic Metal Package • Very low Gate Charge • Very Low RDS (on) • Low package inductance-easy to drive and protect MAXIMUM RATINGS RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT @ TC = 25°C PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE THERMAL RESISTANCE, JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25°C ALL RATINGS ARE AT T = 25°C UNLESS OTHERWISE SPECIFIED. C SYMBOL VGS ID (on) IDM TOP/TSTG RthJC PD MIN. -55 - TYP. - MAX. ±20 60 220 +150 0.36 350 UNITS Volts Amps Amps °C °C/W Watts ELECTRICAL CHARACTERISTICS RATING DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250 μA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 44A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 3mA ZERO GATE VOLTAGE DRAIN CURRENT VDS = 600V, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDS = 400V, RISE TIME ID = 44A, TURN OFF DELAY TIME RG = 3.3Ω, FALL TIME VGS = 10V DIODE FORWARD VOLTAGE IS = 44A, VGS = 0V REVERSE RECOVERY TIME IF = 44A, -di/dt = 100A/μsec, VR = 100V INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 100 V f = 1 MHz GATE CHARGE IF = 44A, VDS = 400 V, VGS = 10V, RG = 3.3Ω SYMBOL BVDSS MIN. 600 RDS(ON) VGS(th) IDSS IGSS td(ON) tr td(OFF) tf VSD 2.0 TYP. 40 30 130 20 0.055 4.0 20 500 100 -100 Ω Volts μA μA nA MAX. UNITS Volts nsec - 1.35 Volts trr Ciss Coss - 600 6800 320 - nsec pF Qgs Qgd Qg - 34 51 150 190 nC © 2010 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • • FAX (631) 242-9798 • www.sensitron.com • sales@sensitron.com • SHD224805 SENSITRON TECHNICAL DATA DATA SHEET 5159, Rev. - MECHANICAL DIMENSIONS: in Inches / mm .165 (4.19 Dia. .155 3.94) .695 (17.65 .685 17.40) .270 (6.86 .240 6.10) .045 (1.14 .035 0.89) .707 (17.96 .697 17.70) 1.302 (33.07 1.202 30.53) .835 (21.21 .815 20.70) .550 (13.97 .530 13.46) 1 2 3 .065 (1.65 .055 1.40) 3 Places .200(5.08) BSC 2 Places .140(3.56) BSC TO-258 PINOUT TABLE DEVICE TYPE MOSFET IN A TO-258 PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. © 2010 Sensitron Semiconductor • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • • FAX (631) 242-9798 • www.sensitron.com • sales@sensitron.com •