SHD225452

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4102, REV. - SHD225452 HERMETIC POWER MOSFET P-CHANNEL FEATURES: œ -100 Volt, 0.07 Ohm, -34A MOSFET œ Fast Switching œ Low RDS (on) œ Electrically Equivalent to IRF5210 œ Add an “S” to the end of the part number for S-100 screening, SHD225452S œ Add a “C” to the part number for ceramic seals, SHDC225452 MAXIMUM RATINGS RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT ALL RATINGS ARE AT TC = 25•C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID TOP/TSTG RthJC PD BVDSS RDS(ON) VGS(th) gfs IDSS IGSS Qg Qgs Qgd td(ON) tr td(OFF) tf VSD trr Qrr Ciss Coss Crss MIN. -55 -100 -2.0 10 TYP. MAX. –20 -34 -21 +150 1.0 125 0.07 -4.0 -25 -250 100 -100 180 25 100 28 150 100 120 -1.6 260 1.8 UNITS Volts Amps •C •C/W Watts Volts W Volts S(1/W) mA nA nC VGS=-10V, TC = 25•C VGS=-10V, TC = 100•C OPERATING AND STORAGE TEMPERATURE THERMAL RESISTANCE, JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25•C ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = -250mA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = -10V, ID = -21A GATE THRESHOLD VOLTAGE VDS = VGS, ID = -250mA FORWARD TRANSCONDUCTANCE VDS = -15V, IDS = -21A ZERO GATE VOLTAGE DRAIN CURRENT VDS = Max. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125•C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TOTAL GATE CHARGE VGS = -10 V, GATE TO SOURCE CHARGE VDS = -80 V, GATE TO DRAIN CHARGE ID = -21A TURN ON DELAY TIME VDD = -50V, RISE TIME ID = -21A TURN OFF DELAY TIME RG = 2.5W FALL TIME DIODE FORWARD VOLTAGE Tj = 25•C, IS = -21A VGS = 0V REVERSE RECOVERY TIME TJ = 25•C, If = -21A diF/ds = 100A/msec INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = -25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz nsec Volts nsec mC pF - 2730 824 465   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - sales@sensitron.com               SHD225452 SENSITRON TECHNICAL DATA DATA SHEET 4102, REV. MECHANICAL DIMENSIONS: in Inches / mm .149 (3.78 Dia. .139 3.53) .545 (13.84 .535 13.60) .260 .249 .050 .040 (6.60 6.32) (1.27 1.02) .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) 1 2 3 .045 (1.14 .035 0.89) 3 Places .150(3.81) BSC 2 Places .150(3.81) BSC TO-254 PINOUT TABLE DEVICE TYPE MOSFET, TO-254 PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •