SHD225609

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 275, REV – Formerly part number SHD2256 SHD225609 HERMETIC POWER MOSFET N-CHANNEL FEATURES: œ 800 Volt, 0.80 Ohm, 13A MOSFET œ Isolated Hermetic Metal Package œ Fast Switching œ Low RDS (on) œ Similar to Industry Part Type - IXTM13N80 MAXIMUM RATINGS RATING GATE TO SOURCE VOLTAGE (continuous) ON-STATE DRAIN CURRENT PULSED DRAIN CURRENT @ TC = 25•C OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION @ TC = 25•C ALL RATINGS ARE AT TC = 25•C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID IDM TJ/TSTG PD BVDSS RDS(ON) VGS(th) gfs IDSS IGSS td(ON) tr td(OFF) tf VSD trr Ciss Coss Crss RthJC MIN. -55 800 2.0 8.0 TYP. 14 20 33 63 32 800 4500 310 65 MAX. –20 13 52 +150 180 0.80 4.5 0.25 1.0 100 -100 50 50 100 50 1.5 0.7 UNITS Volts Amps Amps •C Watts Volts W Volts S(1/W) mA nA nsec Volts nsec pF •C/W ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 3.0 mA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 0.5œID25 GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250mA FORWARD TRANSCONDUCTANCE VDS = 10V; ID = 0.5œID25 ZERO GATE VOLTAGE DRAIN CURRENT VGS = 0V, VDS = 0.8œ VDSS TJ = 125•C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDS = 0.5œVDSS’, RISE TIME ID = 0.5 ID25, TURN OFF DELAY TIME RG = 2.0W, FALL TIME VGS = 10V DIODE FORWARD VOLTAGE IF = IS’ VGS = 0V Pulse test, t ˆ 300 ms, duty cycle d ˆ 2 % REVERSE RECOVERY TIME If = IS, di/dt = 100A/msec, VR = 100V INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz THERMAL RESISTANCE, JUNCTION TO CASE -   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - www.sensitron.com E-Mail Address - sales@sensitron.com               SHD225609 SENSITRON TECHNICAL DATA DATA SHEET 275, REV – Formerly part number SHD2256 MECHANICAL DIMENSIONS: in Inches / mm .149 (3.78 Dia. .139 3.53) .545 (13.84 .535 13.60) .260 .249 .050 .040 (6.60 6.32) (1.27 1.02) .685 (17.40 .665 16.89) 1.235 (31.37 1.195 30.35) .800 (20.32 .790 20.07) .545 (13.84 .535 13.58) 1 2 3 .045 (1.14 .035 0.89) 3 Places .150(3.81) BSC 2 Places .150(3.81) BSC TO-254 PINOUT TABLE DEVICE TYPE MOSFET TO-254 PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - www.sensitron.com E-Mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •