SHD226403R

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 171, REV. B Formerly Part Number SHD2263 SHD226403 SHD226403R HERMETIC POWER MOSFET - N-CHANNEL FEATURES: • 200 Volt, 0.21 Ohm, 14A MOSFET • Isolated Hermetic Metal Package • Fast Switching • Low RDS (on) • Ceramic Seals available (Add a “C” to the part number, i.e. SHDC226403) • Similar to IRFY240 MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID (on) IDM TOP/TSTG RθJC PD MIN. -55 TYP. MAX. ±20 14 ±56 +150 2.1 60 UNITS Volts Amps Amps °C °C/W Watts RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT VDS ≥ 2VDS(on), VGS = 10V PULSED DRAIN CURRENT @ T C = 2 5° C OPERATING AND STORAGE TEMPERATURE THERMAL RESISTANCE, JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25°C ELECTRICAL CHARACTERISTICS CHARACTERISTIC DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250 µA DRAIN TO SOURCE ON-STATE VOLTAGE VGS = 10V, ID = 10A STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 10A VGS = 10V, ID = 10A, TC = 125°C GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250µA FORWARD TRANSCONDUCTANCE VDS ≥ 2VDS(on), ID = 10A ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8xMax. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TC = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 100V, RISE TIME ID =14A, TURN OFF DELAY TIME RG = 5.0Ω, FALL TIME VGS = 10V DIODE FORWARD VOLTAGE TC = 25°C, IS = -14A, VGS = 0V REVERSE RECOVERY TIME TJ = 150°C, If = IS, diF/ds = 100A/µsec, INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz SYMBOL BVDSS VDS(ON) RDS(ON) VGS(th) gfs IDSS IGSS td(ON) tr td(OFF) tf VSD trr Ciss Coss Crss 2.0 6.0 0.1 0.2 17 52 36 30 350 1300 400 130 pF 0.25 1.0 100 -100 mA nA nsec -1.5 nsec Volts MIN. 200 TYP. 1.8 0.21 0.40 4.0 Ω Volts S(1/Ω) MAX. 2.1 UNITS Volts Volts - • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - www.sensitron.com • E-Mail Address - sales@sensitron.com • SHD226403 SHD226403R SENSITRON DATA SHEET 171 REVISION B MECHANICAL DIMENSIONS: in Inches / mm .150 (3.81 Dia. .140 3.56) .420 (10.67 .410 10.41) .200 (5.08 .190 4.82) .045 (1.14 .035 0.89) .537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21) .665 (16.89 .645 16.38) .430 (10.92 .410 10.41) 1 2 3 .035 (0.89 .025 0.63) 3 Places .100(2.54) BSC 2 Places .120(3.05) BSC TO-257 PINOUT TABLE DEVICE TYPE SHD226403 SHD226403R PIN 1 DRAIN GATE PIN 2 SOURCE DRAIN PIN 3 GATE SOURCE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - www.sensitron.com • E-Mail Address - sales@sensitron.com •