SHD230409

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 721, REV - SHD230409 HERMETIC POWER MOSFET P-CHANNEL FEATURES: œ -100 Volt, 0.22 Ohm MOSFET œ Isolated and Hermetically Sealed œ Simple Drive Requirements MAXIMUM RATINGS RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT ALL RATINGS ARE AT TA = 25•C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID TOP/TSTG R JC PD BVDSS RDS(ON) VGS(th) gfs IDSS IGSS Qg Qgs Qgd td(ON) tr td(ON) tf VSD trr Qrr Ciss Coss Crss   ELECTRICAL CHARACTERISTICS VGS=10V, TC = 25•C VGS=10V, TC = 100•C OPERATING AND STORAGE TEMPERATURE TERMAL RESISTANCE JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25•C MIN. -55 -100 -2.0 6.2 - TYP. - MAX. –20 -14 -9.5 150 1.36 90 0.22 0.24 -4.0 -25 -250 100 -100 60 13 35.2 35 85 85 65 -4.2 280 3.6 - UNITS Volts Amps •C •C/W Watts Volts W Volts S(1/W) mA DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0mA DRAIN TO SOURCE ON STATE RESISTANCE VGS = -10V, ID = -9.5A VGS = -10V, ID = -14A GATE THRESHOLD VOLTAGE VDS = VGS, ID = -250mA FORWARD TRANSCONDUCTANCE VDS ˜ -15V, IDS = -9.5A ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8xMax. Rating, VGS = 0V VDS = 0.8xMax. Rating VGS = 0V, TJ = 125•C GATE TO SOURCE LEAKAGE FORWARD @ RATED GATE TO SOURCE LEAKAGE REVERSE VGS TOTAL GATE CHARGE VGS = -10 V, GATE TO SOURCE CHARGE VDS = .5X max. rating, GATE TO DRAIN CHARGE ID = .5 x rated ID TURN ON DELAY TIME VDD = -50V RISE TIME ID = 14A TURN OFF DELAY TIME RG = 9.1W FALL TIME DIODE FORWARD VOLTAGE TJ = 25•C, IS = 14A, VGS = 0V DIODE REVERSE RECOVERY TIME TJ = 25•C REVERSE RECOVERY CHARGE If = 14A di/dt = -100A/sec INPUT CAPACITANCE VGS = 0 Volts OUTPUT CAPACITANCE VDS = 25 Volts REVERSE TRANSFER CAPACITANCE f = 1 MHz 31 3.7 7.0 - - nA nC nsec - 1400 600 200 Volts nsec mC pF œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ œ W orld Wide Web Site - http://www.sensitron.com œ E-Mail Address - sales@sensitron.com œ SHD230409 SENSITRON DATA SHEET 721, REV. - MECHANICAL DIMENSIONS: in Inches / m .011 (.279 .009 .228) .040(1.02) x 45 o Chamfer 3 Plcs .030(.762)Typ .050(1.27)Typ .030Typ (.762) .458 (11.7 .442 11.2) .310 (7.88 .290 7.36) .305 (7.75 .295 7.49) .040(1.02) x 45 o Pin 26 Pin 1 Chamfer 3 Plcs .095(2.42)Max .035(.889)Typ .010(.254)Typ LCC-28T PINOUT TABLE MOSFET - LCC-28T PINS(S) 1 & 15-28 SOURCE PINS 5-11 DRAIN PINS 2, 3, 13, & 14 GATE œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ œ W orld Wide Web Site - http://www.sensitron.com œ E-Mail Address - sales@sensitron.com œ SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •