SHD239504

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1097, REV. - SHD239504 HERMETIC POWER MOSFET N-CHANNEL FEATURES: œ 400 Volt, 0.3 Ohm, 9.0A MOSFET œ Low RDS (on) œ Electrically Equivalent to IRF350 Series MAXIMUM RATINGS RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT @ TC = 25•C ON-STATE DRAIN CURRENT @ TC = 100•C OPERATING AND STORAGE TEMPERATURE THERMAL RESISTANCE, JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25•C ALL RATINGS ARE AT TC = 25•C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID ID TOP/TSTG RthJC PD SYMBOL BVDSS RDS(ON) VGS(th) gfs IDSS IGSS td(ON) tr td(OFF) tf Qg Qgs Qgd VSD QRR trr Ciss Coss Crss   MIN. -55 MIN. 400 6.0 6.0 - TYP. TYP. - MAX. –20 14 9.0 +150 0.37 340 MAX. 0.3 0.4 250 1000 100 -100 35 190 170 130 110 18 65 1.7 11 1200 - UNITS Volts Amps Amps •C •C/W Watts UNITS Volts W Volts S(1/W) mA nA nsec nC nC nC Volts mC nsec pF ELECTRICAL CHARACTERISTICS CHARACTERISTIC DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0mA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 9.0A VGS = 10V, ID = 14A GATE THRESHOLD VOLTAGE VDS ˜ 15VGS, IDS = 9.0A FORWARD TRANSCONDUCTANCE VDS ˜ 15V, IDS = 9.0A ZERO GATE VOLTAGE DRAIN CURRENT VDS = Max. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125•C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 200V, RISE TIME ID = 14A, TURN OFF DELAY TIME RG = 2.35W FALL TIME TOTAL GATE CHARGE ID = 14A, GATE TO SOURCE CHARGE VGS = 10V, GATE TO DRAIN CHARGE VDS =0.5xMax. Rating DIODE FORWARD VOLTAGE TC = 25•C, IS = 14A, VGS = 0V REVERSE RECOVERY CHARGE TJ = 25•C, di/dt ˆ 100A/msec, VDD ˆ 50V REVERSE RECOVERY TIME TJ = 25•C, IF = 14A, di/dt ˆ 100A/msec, VDD ˆ 50V INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz     52 5.0 25 - 2600 680 250     221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - sales@sensitron.com       SHD239504 SENSITRON DATA SHEET 1097 REVISION MECHANICAL DIMENSIONS: in Inches / mm .150±.007 (3.81±.178) .090±.003 (2.286±.0762) .040±.002 (1.016±.0508) .020±.002 (.508±.0508) .785±.005 (19.94±.127) 2 .594±.009 (15.09±.229) .257±.003 (6.53±.076) 2 Places 1 3 .080±.003 (2.032±.076) .487±.003 (12.37±.076) .200±.003 (5.08±.076) 2 Places SHD-6 PINOUT TABLE DEVICE TYPE MOSFET, SURFACE MOUNT SHD-6 PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •