SHD50101

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 1154, REV B Formerly part number SHD50101 SHD501603 DUAL FIXED +/- 15.0 VOLT 1.5 AMP VOLTAGE REGULATOR FEATURES: • ISOLATED HERMETIC PACKAGE • SIMILAR to INDUSTRY TYPES 7815 / 7915 MAXIMUM RATINGS (+15V) Parameter Input Voltage Ambient Operating Temperature Range (TA) Storage Temperature Range Thermal Resistance (RθJC) Rated Power Conditions TC = +25°C All ratings are at TA = 25°C unless otherwise specified. Per regulator Per regulator Maximum 35 -55 to +150 -65 to +150 3.0 17.5 Units Vdc °C °C °C/W W ELECTRICAL CHARACTERISTICS (+15V) Symbol VO Parameter Output Voltage Conditions TA = 25°C 18.5V ≤ VIN ≤ 30V PD ≤ 15W, 5 mA ≤ IO ≤ 1A 18.5V ≤ VIN ≤ 30V 17.5V ≤ VIN ≤ 30V TA = 25°C -55°C ≤ TC ≤ + 125°C 20V ≤ VIN ≤ 26V TC = 25°C -55°C ≤ TC ≤ + 125°C Tj = 25°C 5 mA ≤ IO ≤ 1.5A 250 mA ≤ IO ≤ 750mA 5 mA ≤ IO ≤ 1A, -55° ≤ TC ≤ + 125 °C TC = 25°C -55°C ≤ TC ≤ + 125°C 5 mA ≤ IO ≤ 1.0A, -55°C ≤ TC ≤ + 125°C 18.5V ≤ VIN ≤ 30V, -55°C ≤ TC ≤ + 125°C TC = 25 °C, IO = 1.0A TC = 25 °C VIN = 35V TC = 25 °C -55°C ≤ TC ≤ + 125°C f = 120Hz IO ≤ 1A, TC = 25°C ∆VIN =10V IO ≤ 500 mA, -55°C ≤ TC ≤ + 125°C TC = 25°C, f = 10Hz to 100kHz TC = 25°C, t=1000 hours Min. 14.8 14.6 14.4 1.5 54 54 Typ. 15 15 70 Max. 15.2 15.4 15.6 20 50 15 25 35 21 75 6 6.5 0.5 0.8 2.5 3.3 1.2 2.8 40 150 Units V V V mV mV mV mV mV mV mV mA mA mA mA V A A dB dB uV/V rms mV VRLINE Line Regulation VRLOAD Load Regulation IQ ∆IQ VDO IO(pk) IOS ∆VIN ∆VOUT NO ∆VOUT ∆t Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage Long Term Stability Note: Conditions unless otherwise noted: IOUT = 500 mA, CIN = 2.2 µF, COUT = 1µf, 0°C ≤ TJ ≤ +125°C, Power Dissipation = 1.5W, Vin = 23V. • 221 West Industry Court Deer Park, NY 11729 (631) 586-7600, FAX (631) 242-9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON DATASHEET 1154, REVISION B Formerly part number SHD50101 SHD501603 MAXIMUM RATINGS (-15V) Parameter Input Voltage Ambient Operating Temperature Range (TA) Storage Temperature Range Thermal Resistance (RθJC) Rated Power Conditions TC = +25°C All ratings are at TC = 25°C unless otherwise specified. Maximum -35 -55 to +150 -65 to +150 3.0 17.5 Units Vdc °C °C °C/W W Per regulator Per regulator ELECTRICAL CHARACTERISTICS (-15V) Symbol Parameter Conditions VO Output Voltage TA = 25°C 5 mA ≤ IO ≤ 1A P ≤ 15W VRLINE Line Regulation TJ = 25°C, VIN = -17.5V to -30V VIN = -20V to -26V VRLOAD Load Regulation TJ = 25°C 5 mA ≤ IO ≤ 1.5A 250 mA ≤ IO ≤ 750mA TJ = 25°C With Line With Load, 5 mA ≤ IO ≤ 1A TJ = 25 °C, IO = 1A TJ = 25 VIN = -35V TC = 25 °C -55°C ≤ TC ≤ + 125°C f = 120Hz TA = 25°C, f = 10Hz ≤ f ≤ 100kHz TC = 25°C, t=1000 hours Min. -15.15 -15.75 1.5 - Typ. -15.0 Max. -14.85 -14.25 25 15 35 21 6.0 0.8 0.5 2.5 3.3 1.2 2.8 150 Units V V mV mV mV mV mA mA mA V A A 5.0 3.0 - IQ ∆IQ VDO IO(pk) IOS Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current ∆VIN ∆VOUT NO ∆VOUT ∆t Ripple Rejection Output Noise Voltage Long Term Stability 54 - 70 375 - dB µV RMS mV Note: Conditions unless otherwise noted: IOUT = 500 mA, CIN = 2.2 µF, COUT = 1µf, 0°C ≤ TJ ≤ +125°C, Power Dissipation = 1.5W, Vin = -23V. • 221 West Industry Court Deer Park, NY 11729 (631) 586-7600, FAX (631) 242-9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON DATASHEET 1154, REVISION B Formerly part number SHD50101 MECHANICAL DIMENSIONS: In Inches / mm .695 (17.65 .685 17.40) .165 (4.19 .155 3.94) .270 (6.86 .240 6.10) .045 (1.14 .035 .89) SHD501603 .707 (17.96 .697 17.70) 12345 .835 (21.21 .815 20.70) .550 (13.97 .530 13.46) .045(1.14) R .750 (19.05 .500 12.70) .035 (.89 .025 .64) .100 (2.54) Typ .140 (3.56) Typ MO-078 PINOUT TABLE TYPE +15V/-15V Voltage Regulator MO-078 Package PIN 1 + Input PIN 2 + Output PIN 3 Common PIN 4 - Input PIN 5 - Output DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729 (631) 586-7600, FAX (631) 242-9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com •