SHD519023

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 891, REV. A Formerly part number SHD51923 SHD519023 FIXED NEGATIVE 1.5 AMP 15 VOLT REGULATOR FEATURES: • CERAMIC HERMETIC PACKAGE • SIMILAR to INDUSTRY TYPE 7915 All ratings are at TC = 25°C unless otherwise specified. MAXIMUM RATINGS Parameter Input Voltage Ambient Operating Temperature Range (TA) Storage Temperature Range Thermal Resistance (RθJC) Rated Power Conditions VO = 15V - - Maximum 35 -55 to +150 Units Vdc °C °C °C/W W TC = +25°C - -65 to +150 4.2 30 ELECTRICAL CHARACTERISTICS Symbo Parameter Conditions l VO Output Voltage TJ = 25°C 5 mA ≤ IO ≤ 1A P ≤ 15W VRLINE Line Regulation TJ = 25°C, VIN = -17.5V to 30V VIN = -20V to -26V VRLOAD Load Regulation TJ = 25°C 5 mA ≤ IO ≤ 1.5A 250 mA ≤ IO ≤ 750mA TJ = 25°C With Line With Load, 5 mA ≤ IO ≤ 1A TJ = 25 °C, IO = 1A TJ = 25 VIN = 35V f = 120Hz TA = 25°C, f = 10Hz ≤ f ≤ 100kHz TC = 25°C, t=1000 hours TC = 25 °C -55°C ≤ TC ≤ + 125°C Min. -15.15 -15.75 - Typ. -15.0 Max. -14.85 -14.25 25 15 Units V V mV mV 5.0 3.0 IQ ∆IQ VDO IOMAX IOS Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage Long Term Stability 1.5 - - 35 21 6.0 0.8 0.5 2.5 3.3 1.2 2.8 150 mV mV mA mA mA V A A ∆VIN ∆VOUT NO ∆VOUT ∆t 54 - 70 375 - dB µV rms mV Note: Conditions unless otherwise noted: IOUT = 500 mA, CIN = 2.2 µF, COUT = 1µf, 0°C ≤ TJ ≤ +125°C, Power Dissipation = 1.5W. • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com • SHD519023 SENSITRON TECHNICAL DATA DATA SHEET 891, REV. A MECHANICAL DIMENSIONS: In inches / mm .145 (3.68) .037 (.94) .030 (.76) Min. .050 (1.27) 2 .375 (9.53) 1 3 .140 (3.56)Typ. .035 (.89) Min. .450 (11.43) .415 (10.54) .625 (15.88) .157 (3.99) LCC-3P PINOUT TABLE TYPE LCC-3P, -15V Regulator PIN 1 VIN PIN 2 GROUND PIN 3 VOUT DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 • • World Wide Web - www.sensitron.com • E-mail Address - sales@sensitron.com •