SHD526201_11

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4021, REV. A SHD526201 LOW DROP NEGATIVE 5V 1.0 AMP REGULATOR FEATURES: • ISOLATED HERMETIC PACKAGE • SIMILAR to INDUSTRY TYPE LM2990-5 MAXIMUM RATINGS Parameter Input to Output Voltage Differential Storage Temperature Range Lead Temperature Power Dissipation (PD) Maximum Thermal Resistance Junction to Case (θ JC) Maximum Junction Temperature (TJ) Ambient Operating Temperature Range (TA) Conditions Soldering, 10 seconds Recommended Conditions All ratings are at TA = 25°C unless otherwise specified. Typical Limit -26.0 -65 to +150 +300 Internally Limited 3.5 -65 to +150 -55 to +125 Units Vdc °C °C W °C/W °C °C ELECTRICAL CHARACTERISTICS Parameter Output Voltage (Vo) Line Regulation (VRLINE) Load Regulation (VRLOAD) Drop Out Voltage Quiescent Current ∆IQ Current Limit ∆VOUT ∆VOUT VDO Conditions VIN = -10V, 5 mA < IOUT < 1.0A TA = +25°C -6V ≤ VIN ≤ 26V; IOUT = 5 mA 50 mA ≤ IOUT ≤ 1A, VIN = -10V Io = 0.1A Io = 1.0A 5 mA < IOUT < 1.0A VIN = -10V, RL = 1Ω -55°C ≤ TJ ≤ +125°C VIN = -10V, f = 1 KHz Vripple = 1Vrms. IOUT = 5 mA 10 Hz ~ 100 KHz, IOUT = 5 mA TA = 25°C, t = 1,000 Min -5.10 ±4 ±1 0.1 0.6 1 1.5 1.8 (typ) 50 58 (typ) 250 (typ) Limit -4.90 ± 40 ± 40 0.3 1.0 5 1.5 750 2000 Units V mV mV V mA A % dB µV ppm ICL Temperature Stability ∆VOUT / ∆t Ripple Rejection (∆VIN / ∆VOUT) Output Noise Voltage Long Term Stability (∆VOUT / ∆t) 2009 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •www.sensitron.com • sales@sensitron.com SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4021, REV. A SHD526201 MECHANICAL DIMENSIONS .200 (5.08 .190 4.82) .045 (1.14 .035 0.89) .150 (3.81 Dia. .140 3.56) .420 (10.67 .410 10.41) .537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21) .665 (16.89 .645 16.38) .430 (10.92 .410 10.41) 123 .035 (0.89 .025 0.63) 3 Places .100(2.54) BSC 2 Places .120(3.05) BSC TO-257 PINOUT TABLE TYPE TO - 257, 1.0A Regulator PIN 1 Common PIN 2 VIN PIN 3 VOUT DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. 2009 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX 631 242 9798 •www.sensitron.com • sales@sensitron.com