SHD618112P

SENSITRON SEMICONDUCTOR TECHNICAL DATA, PROVISIONAL DATA ONLY DATASHEET 4178, Rev. A SHD618112P/N SHD618112AP/N SHD618112BP/N HERMETIC SILICON CARBIDE RECTIFIER DESCRIPTION: A 1200-VOLT, 20 AMP POWER SILICON CARBIDE RECTIFIER IN A CERAMIC HERMETIC SHD-5 PACKAGE FEATURES: • NO RECOVERY TIME OR REVERSE RECOVERY LOSSES • NO TEMPERATURE INFLUENCE ON SWITCHING BEHAVIOR MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE MAXIMUM DC OUTPUT CURRENT PER LEG MAXIMUM REPETITIVE FORWARD SURGE CURRENT PER LEG (t = 8.3ms, Sine) MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG (t = 10µs, pulse) MAXIMUM JUNCTION CAPACITANCE PER LEG (V r =400V) MAXIMUM POWER DISSIPATION MAXIMUM THERMAL RESISTANCE (Junction to Case) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE ALL RATINGS ARE @ TC = 25 °C UNLESS OTHERWISE SPECIFIED. SYMBOL PIV IO IFRM IFSM CT Pd RθJC Top, Tstg MAX. 1200 10 50 UNITS Volts Amps Amps 250 Amps 70 40 0.90 -55 to +200 pF W °C/W °C ELECTRICAL CHARACTERISTICS CHARACTERISTIC MAXIMUM FORWARD VOLTAGE DROP If =10A PER LEG, TJ =25 °C TJ =175 °C MAXIMUM REVERSE CURRENT PIV = 1200V PER LEG, TJ = 25 °C TJ = 175 °C TOTAL CAPACITIVE CHARGE PER LEG (VR =1200V, IF =10A, di/dt=500A/µs and TJ=25°C) QC TYP 1.60 2.50 0.01 0.02 60 MAX. 1.80 3.00 0.40 2.00 N/A mA nC Volts UNITS • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD618112P/N SHD618112AP/N SHD618112BP/N SENSITRON TECHNICAL DATA, PROVISIONAL DATA ONLY DATASHEET 4178, Rev. A MECHANICAL DIMENSIONS: In Inches / mm .370±.010 (9.40±.254) 2 .610±.010 (15.5 ±.254) 3 .030±.010 (.762±.254) COMMON CATHODE COMMON ANODE 2 .110 (2.80) Max Alumina Ring 1 3 2 1 3 Terminal 1 SHD-5 .510±.020 (12.9±.508) .370±.010 (9.40±.254) .125±.010 (3.17±.254) .370±.010 (9.40±.254) .090±.010 (2.29±.254) .520±.020 (13.2±.508) 2 .030±.010 (.762±.254) .610±.010 (15.5±.254) .320±.010 (8.13±.254) .610±.010 (15.5±.254) .030±.010 (.762±.254) 2 .320±.010 (8.13 ±.254) 3 3 .110 (2.79) Max Alumina Ring Moly Base Terminal 1 .060±.010 (1.52±.254) Moly Lid .020±.005 R (.508±.127 ) Copper Terminals .130 (3.30) Max Moly Lid .020±.005 R (.508±.127 ) Alumina Ring .020±.002 (.508±.051) Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) SHD-5A PINOUT TABLE DEVICE TYPE DUAL RECTIFIER, COMMON CATHODE (P) DUAL RECTIFIER, COMMON ANODE (N) SHD-5B PIN 1 COMMON CATHODE COMMON ANODE PIN 2 ANODE 1 CATHODE 1 PIN 3 ANODE 2 CATHODE 2 • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD618112P/N SHD618112AP/N SHD618112BP/N SENSITRON TECHNICAL DATA, PROVISIONAL DATA ONLY DATASHEET 4178, Rev. A Application Note: Customers should be aware that at the current stage of technical development of SiC, the reverse avalanche capabilities of the device are limited. Customer designs will need to accommodate these limitations and avoid exposure of the device to this and other potentially damaging conditions in their applications. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •