SHD850003D

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 784, REV. A SHD850003D 3A-Peak Low Side MOSFET Driver Bipolar/CMOS/DMOS Process FEATURES: • CMOS Construction • Similar to Industry Part Number MIC4424 • Low Output Impedance, 3.5 Ohms • • Latch-Up Protected; Will Withstand > 500mA Reverse Output Current Logic Input Withstands Negative Swing of Up to -5V MAXIMUM RATINGS RATING Power Dissipation (TC = 25°C) Derating Factors (CerDip) Storage Temperature Lead Temperature (10sec) Supply Voltage Input Voltage, (V S + 0.3V to Ground –5.0) Input Current (V IN >VS) MIN. -65 -1.0 TYP. MAX. 1250 12.5 +150 300 22 -5.0 1.0 UNITS mW mW/ °C °C °C Volts Volts mA ELECTRICAL CHARACTERISTICS RATING Logic 1 Input Voltage Logic 0 Input Voltage Input Voltage Range Input Current, (0V ≤ VIN ≤ VS) High Output Voltage Low Output Voltage Output Resistance, Output High, (IOUT = 10mA, Vs = 18V) Output Resistance, Output Low, (IOUT = 10mA, Vs = 18V) Peak Output Current VS = 18V Latch-Up Protection; withstand reverse current. Rise Time, (CL = 1800 pF) Fall Time, (CL = 1800 pF) Delay Time, Rise (CL = 1800 pF) Delay Time, Fall (CL = 1800 pF) Power Supply Current, (V IN = 3.0V) (V IN = 0V) Operating Input Voltage SYMBOL VIH VIL VIN IIN VOH VOL RO RO IPK IR tR tF td1 td2 IS VS TA = 25°C with 4.5V ≤ V S ≤ 18V otherwise specified. MIN. 2.4 0 -1.0 VS -0.025 >500 4.5 TYP. 2.8 3.5 3.0 23 25 33 38 1.5 0.15 - MAX. 0.8 VS 1.0 0.025 5.0 5.0 35 35 75 75 2.5 0.25 18 UNITS Volts Volts Volts µA Volts Volts Ohms Ohms Amps mA ns ns ns ns mA mA Volts ELECTRICAL CHARACTERISTICS RATING Logic 1 Input Voltage Logic 0 Input Voltage Input Voltage Range Input Current, (0V ≤ VIN ≤ VS) High Output Voltage Low Output Voltage TA = - 55°C to +125° C with 4.5V ≤ VS ≤ 18V otherwise specified. SYMBOL VIH VIL VIN IIN VOH VOL MIN. 2.4 0 -10 VS -0.025 - TYP. - MAX. 0.8 VS 10 0.025 UNITS Volts Volts Volts µA Volts Volts •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD850003D SENSITRON TECHNICAL DATA DATA SHEET 784, REV. A ELECTRICAL CHARACTERISTICS (Continued) RATING Output Resistance, Output High, VIN = 0.8 (IOUT = 10mA, Vs = 18V) Output Resistance, Output Low, VIN = 2.4 (IOUT = 10mA, Vs = 18V) Rise Time, (CL = 1800 pF) Fall Time, (CL = 1800 pF) Delay Time, Rise (CL = 1800 pF) Delay Time, Fall (CL = 1800 pF) Power Supply Current, (V IN = 3.0V) (V IN = 0V) Operating Input Voltage TA = - 55°C to +125°C with 4.5V ≤ V S ≤ 18V otherwise specified. SYMBOL RO RO tR tF td1 td2 IS VS MIN. 4.5 TYP. 3.7 4.3 28 32 32 38 2.0 0.20 - MAX. 8.0 8.0 60 60 100 100 3.5 0.3 18 UNITS Ohms Ohms ns ns ns ns mA Volts MECHANICAL DIMENSIONS: in Inches / mm 1 1 10 .125±.010 [3.18±.25] CerPack-10 PINOUT TABLE DEVICE TYPE MOSFET DRIVER CERPACK-10 Pin 1 N/C Pin 2 Input A Pin 3 Gnd. Pin 4 Input B Pin 5 N/C Pin 6 N/C Pin 7 Output B Pin 8 VS Pin 9 Output A Pin 10 N/C •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •