SL63100

SENSITRON _____ SEMICONDUCTOR TECHNICAL DATA DATA SHEET 262, REV - SL63100 THREE PHASE FULL WAVE BRIDGE RECTIFIER ASSEMBLY DESCRIPTION: 1000 VOLT, 7.5 AMP, 5000 NANOSECOND THREE PHASE BRIDGE RECTIFIER ASSEMBLY. MAX. RATINGS / ELECTRICAL CHARACTERISTICS RATING Peak Inverse Voltage (PIV) Average DC Output Current (TC = Case Temp) (Io) Average DC Output Current Ambient Temp. (no heat sink) (Io) Peak Single Cycle Surge Current (IFSM) CONDITIONS TC = 55 oC TC = 100 C TC = 125 oC TA = 25 oC TA = 55 c TA = 100 Oc tp = 8.3 ms Single Half Cycle Sine Wave, Superimposed On Rated Load TA = 25 oC If = 3.0A (300 µsec pulse, duty cycle < 2%) TA = 25° C TA = 100° C If = 0.5A, Ir = 1.0A, Irr = 0.25A O o All ratings are at TA = 25oC unless otherwise specified. MIN TYP MAX 1000 7.5 5.5 3.75 3.0 2.3 1.5 50 Amps(pk) Amps UNIT Vdc Amps Peak Recurring Surge Current (IFRM) Operating and Storage Temp. (Top & Tstg) Maximum Forward Voltage (Vf) Maximum Instantaneous Reverse Current At Rated (PIV) Reverse Recovery Time (trr) Thermal Resistance (θJL) -55 - - 15 +150 1.4 Amps °C Volts - - 5.0 100 5000 4.5 µAmps nsec °C/W • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SL63100 SENSITRON TECHNICAL DATA DATA SHEET 262, REV - MECHANICAL DIMENSIONS: In Inches / mm 1.12 (28.45) 1.000 (25.40) 2-56 UNC 4 Places Min 6 Full Threads .25 (6.36) .75 (19.05) – AC AC AC + .625 (15.875) .085 (2.159) .200 Max. (5.08) .16(4.06) .040(1.016) .080(2.032) .18(4.57) Insulated Terminal 5 Places FIG. 405 Note: Case finish - Black Anodized DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •