SMDA05C-G

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4601, REV. - SMDA03C-G thru SMDA24C-G Green Products TVS ARRAY SERIES FEATURES SO-8 ü Protects 3.3, 5, 12, 15, 24 V Components ü Bidirectional ü Provides Electrically Isolated Protection ü 300 W @ 8/20 µs ü Protects 4 Lines ü SO-8 Packaging ü Green Products in Compliance with the RoHS Directive DESCRIPTION The SMDAXXC-G series of TVS array have been designed to provide bidirectional protection for sensitive electronics from damage due to voltage transients caused by electrostatic discharge (ESD), electrical fast transients (EFT), lightning and other voltage-induced transient events. The device can be used to protect combinations of four bidirectional lines. SCHEMATIC & PIN CONFIGURATION APPLICATION ü ü ü ü ü ü RS-232 & RS-422 Data Lines Microprocessor Based Equipment Notebooks, Desktops, & Servers LAN/WAN Equipment Serial and Parallel Port Peripherals MECHANICAL CHARACTERISTICS ü ü ü ü ü SO-8 Surface Mount Package Approximate Weight: 0.1 grams Makring: Device number, Date code, & Logo PIN #1 Indicator: DOT on top of package Packaging: Tubes or Tape & Reel per EIA Standard 481 ABSOLUTE MAXIMUM RATINGS Symbol Parameter P Peak Pulse Power, 8/20 µs Waveshape TJ Operating Temperature TSTG Storage Temperature TL Lead Soldering Temperature Value 300 -55 to +125 -55 to +150 260 (10 Sec.) Unit W °C °C °C • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • Page 1 SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4601, REV. ELECTRICAL CHARACTERISTICS @ 25 ° C Part Number Stand-off Voltage Vwm (v) Max 3.3 5.0 12.0 15.0 24.0 Breakdown Voltage VBR @1mA (V) Min 4 6 13.3 16.7 26.7 Clamping Voltage Vc @1A (V) Max 7 9.8 19 24 43 Leakage Current IR @ Vwm (µA) Max 200 40 1 1 1 SMDA03C-G thru SMDA24C-G Green Products SMDA03C-G SMDA05C-G SMDA12C-G SMDA15C-G SMDA24C-G Capacitance (f = 1MHz) C @ 0V (pF) Max 400 300 94 70 45 Temperature Coefficient of VBR a(V BR ) mv/ °C Max -5 1 8 11 28 PACKAGE OUTLINES & DEMENSIONS INCHES MIN. MAX 0.189 0.196 0.150 0.157 0.053 0.069 0.011 0.021 0.016 0.050 0.050 BSC 0.006 0.010 0.004 0.008 0.189 0.206 0.228 0.244 MILLIMETERS MIN. MAX. 4.8 5.0 3.8 4.0 1.35 1.75 0.28 0.53 0.41 1.27 1.27 BSC 0.15 0.25 0.10 0.20 4.80 5.23 5.79 6.19 DIM A B C D F G J K L P TYPICAL CHARACTERISTICS 10000 110 100 Waveform Parameters: tr = 8µs td = 20µs e -t Percent of IPP 1000 8/20µs 300W Pulse 90 80 70 60 50 40 30 20 10 td = IPP/2 100 10 .1 1 10 Time (µs) 100 1000 10000 0 0 5 10 15 Time ( µs) 20 25 30 Figure 1. Peak Pulse Power Vs Pulse Time (µ s) Figure 2. Pulse Wave Form • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • Page 2 SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4601, REV. - SMDA03C-G thru SMDA24C-G Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • Page 3