SSCDA100

SENSITRON SEMICONDUCTOR TCHNICAL DATA DATA SHEET 4003, REV. A SSCDA100 CENTER TAP/DOUBLER ASSEMBLY (RECTIFIER) DESCRIPTION: 1000 VOLT, 6 AMP, 5 usec CENTER TAP RECTIFIER in a DOUBLER configuration. MAX RATINGS/ELECTRICAL CHARACTRISTICS ALL RATINGS ARE AT TC = 25 C UNLESS OTHERWISE SPECIFIED RATING PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM FORWARD VOLTAGE DROP (PER LEG) (If = 9.0 AMPS) MAXIMUM DC OUTPUT CURRENT (TC = 100 OC) (PER LEG) PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. (PER LEG) MAXIMUM REVERSE RECOVERY TIME (If = 0.5A, Ir = 1.0A, trr = 0.25A) MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) MAXIMUM THERMAL RESISTANCE (PER LEG) MAXIMUM OPERATING AND STORAGE TEMPERATURE Ir RθJC TJ, stg 5.0 4.0 -55 to + 150 mA °C/W °C IFSM trr 100 5 Amps usec IO 6 Amps SYMBOL PIV Vf MAX. 1000 1.40 UNITS Volts Volts • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 249798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TCHNICAL DATA DATA SHEET 4003, REV. A MECHANICAL DIMENSIONS: In Inches / mm SSCDA100 .169 Dia (4.292) 2 Places .39 (9.906) .100 Max (25.4) .12 (3.05) 1.875 (47.625) 2.25 (57.15) .56 (14.22 .48 12.19) 1.47 (37.34) + – AC .56 (14.22 .48 12.19) .172 (4.369) .280 (7.112) .250 (6.350) .092 (2.337) .075 Dia (1.905) Depression .003 (.076) Deep Both Sides .312 (7.924) AC AC AC AC SSCNA + – .34 (8.64) .37 (9.40) SSCPA SSCDA AC + AC AC – AC + AC – .093 Dia (2.362) Fig. 407 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 249798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •