24PC0070G6GN

24PC/26PC Specials Pressure sensors with special fittings and sealings FEATURES · 0...35 mbar to 0...17 bar gage or differential · High impedance bridge · Miniature package · Different pinning configurations · Usable for wet/wet applications1 MEDIA COMPATIBILITY1 All media compatible with port 1: - polyetherimide - silver-filled silicone - silicon nitride - polyetherimide - EPDM, neoprene or silicone - silicon port 2: SPECIFICATIONS (supply voltage, temperature limits, lead temperature, humidity limits, mechanical shock, proof pressure...) AND ELECTRICAL CONNECTION PRESSURE SENSOR CHARACTERISTICS (Vs=10.0 ±0.01 V, tamb=25°C, unless otherwise noted) +Vs 1 see individual data sheets for 24PC or 26PC series 4 - Output Specification notes: 1. P1 of all "gage" devices are normally vented to atmosphere. P1 and P2 of differential devices might be used for "wet-wet" applications, but the media must be compatible with the materials specified under "MEDIA COMPATIBILITY". 2 3 + May 2008 / 593 1/12 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Bx (Barbed, pinning 1 x 4) 12,7 7,9 4x0,5 1,27 3x2,54 Ø4,7 Ø3,2 2,29 P2 20,4 8,9 4x0,41 11,7 4x1,02 Notch Pin 1 mass: 2 g Ø4,1 7,9 dimensions in mm 2xPCxxxxG2Bx (Barbed, pinning 2 x 2) 3 12,7 4 7,9 2 1 Ø4,7 Ø3,2 7,9 P2 20,4 8,9 Notch Pin 1 4x 1,02 5,08 6,3 4x0,41 2,54 4x0,5 8,4 dimensions in mm mass: 2 g 2/12 May 2008 / 593 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Cx (Luer, pinning 1 x 4) 12,7 7,9 4x0,5 1,27 3x2,54 Ø4,6 Ø2,0 2,29 P2 18,8 8,9 4x0,41 11,7 4x1,02 Notch Pin 1 mass: 2 g Ø4,6 7,9 dimensions in mm 2xPCxxxxG2Cx (Luer, pinning 2 x 2) 3 12,7 4 7,9 2 Ø4,6 Ø4,0 Ø2,0 7,9 1 20,4 P2 Notch Pin 1 4x 1,02 5,08 6,3 4x0,41 2,54 4x0,5 8,4 dimensions in mm mass: 2 g May 2008 / 593 8,9 3/12 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Dx (Modular, pinning 1 x 4) 12,7 Ø1,27 4x0,5 1,27 3x2,54 P2 2,29 11,7 4x1,02 Notch Pin 1 7,9 7,9 4x0,41 8,9 mass: 2 g P1 dimensions in mm 2xPCxxxxG2Dx (Modular, pinning 2 x 2) 3 12,7 4 7,9 2 P2 Notch Pin 1 6,3 4x 1,02 5,08 mass: 2 g 1 7,9 8,9 4x0,41 2,54 4x0,5 8,4 P1 dimensions in mm 4/12 May 2008 / 593 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Hx (M5 thread, pinning 1 x 4) Tightening torque3: Max. 67 Ncm 4x1,02 12,7 Ø1,3 7,9 4x0,5 1,27 3x2,54 M5 2,29 11,7 Notch Pin 1 7,9 Ø1,3 Ø7,2 12,7 P2 3,5 21,6 4x0,41 mass: 2 g dimensions in mm 2xPCxxxxG2Hx (M5 thread, pinning 2 x 2) Tightening torque3: Max. 67 Ncm 3 12,7 4 7,9 2 M5 1 7,9 Ø1,3 Ø7,2 12,7 21,6 P2 3,5 Notch Pin 1 6,3 4x 1,02 5,08 4x0,41 2,54 4x0,5 8,4 dimensions in mm mass: 2 g Specification note: 3. Recommended O-ring: Ø 3,68 x 1,78, SH70, recommended counter bore dimensions: Ø 7,62 x 1,02 deep May 2008 / 593 5/12 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Ix (90° port, pinning 1 x 4) Ø5,1 Ø2,0 3,6 Notch Pin 1 2,29 1,27 3x2,54 1,3 8,0 P2 4x0,5 11,7 4x1,02 7,9 12,7 P2 14,6 9,1 4x0,41 12,7 mass: 2 g P1 dimensions in mm 7,9 2xPCxxxxG2Ix (90° port, pinning 2 x 2) Ø5,1 Ø2,0 3,6 4 1 12,7 1,3 8,0 7,9 P2 3 2 7,9 12,7 14,6 P2 9,7 4x 0,41 8,4 dimensions in mm Notch Pin 1 4x 1,02 5,08 6,3 9,1 2,54 4x0,5 mass: 2 g 6/12 May 2008 / 593 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Jx (Needle, pinning 1 x 4) 12,7 7,9 4x0,5 1,27 3x2,54 Ø6,4 Ø1,78 Ø0,5 2,29 22,1 P2 4x0,41 mass: 2 g 11,7 4x1,02 Notch Pin 1 P1 7,9 dimensions in mm 2xPCxxxxG2Jx (Needle, pinning 2 x 2) 3 12,7 4 7,9 2 Ø6,4 Ø1,78 Ø0,5 7,9 1 22,1 P2 Notch Pin 1 4x 1,02 5,08 4x 0,41 2,54 4x0,5 8,4 6,3 8,9 P1 dimensions in mm mass: 2 g May 2008 / 593 7/12 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Kx (Inverse 90° port, pinning 1 x 4) 12,7 7,9 4x0,5 1,3 8,0 2,29 Ø5,1 Ø2,0 3,6 11,7 Notch Pin 1 P2 9,7 7,9 14,6 9,1 7,9 4x0,41 12,7 1,8 P1 dimensions in mm mass: 2 g 2xPCxxxxG2Kx (Inverse 90° port, pinning 2 x 2) 3 12,7 4 7,9 2 1 1,3 Ø5,1 Ø2,0 8,0 P2 3,6 P2 9,7 14,6 9,1 Notch Pin 1 2,54 4x0,5 4x 1,02 5,08 6,3 16,0 4x0,41 8,4 12,7 P1 dimensions in mm mass: 2 g 8/12 May 2008 / 593 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Mx (¼-28 UNF thread, pinning 1 x 4) Tightening torque3: Max. 135 Ncm 12,7 7,9 4x0,5 3x2,54 Ø1,3 Ø5,0 Ø9,1 1,27 2,29 11,7 1/4-28UNF 4x1,02 Notch Pin 1 P2 23,9 15,7 12,4 8,9 4x0,41 mass: 2 g 7,9 dimensions in mm 2xPCxxxxG2Mx (¼-28 UNF thread, pinning 2 x 2) 3 12,7 4 7,9 Tightening torque3: Max. 135 Ncm 2 Ø1,3 Ø5,0 Ø9,1 1 1/4-28UNF 7,9 P2 23,9 15,7 12,4 8,9 6,3 4x 1,02 5,08 Notch Pin 1 4x0,41 8,4 2,54 4x0,5 dimensions in mm mass: 2 g Specification note: 3. Recommended O-ring: Ø 5,28 x 1,78, SH70, recommended counter bore dimensions: Ø 9,14 x 1,78 deep May 2008 / 593 9/12 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR GAGE DEVICES 2xPCxxxxG6Sx (Manifold, pinning 1 x 4) 12,7 7,9 4x0,5 3x2,54 1,27 Ø1,27 Ø6,35 Ø9,1 8,4 13,7 2,29 1,27 11,7 4x1,02 Notch Pin 1 P2 3,05 8,9 4x0,41 P1 7,9 mass: 2 g dimensions in mm 2xPCxxxxG2Sx (Manifold, pinning 2 x 2) 3 12,7 4 7,9 2 1 Ø1,27 Ø6,35 Ø9,1 1,27 3,05 P2 7,9 8,9 6,3 4x 1,02 8,4 13,7 Notch Pin 1 2,54 4x0,5 5,08 4x0,41 8,4 P1 mass: 2 g dimensions in mm 10/12 May 2008 / 593 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings OUTLINE DRAWINGS FOR FLOW THROUGH HOUSINGS 2xPCxxxxG6Gx (Barbed, pinning 1 x 4) P2 P2 4x0,5 1,27 3x2,54 R3,2 1,78 12,7 2,29 11,7 4x1,02 Notch Pin 1 7,9 25,6 2 x Ø3,5 2 x 5,1 2 x Ø2,3 2 x 0,41 1,8 2 x 8,9 8,9 7,1 P1 mass: 2 g 4 x 2,8 4 x 15,4 dimensions in mm 2xPCxxxxG2Gx (Barbed, pinning 2 x 2) 3 P2 4 7,9 2 1 P2 R3,2 Ø1,78 8,9 12,7 25,6 2 x 8,9 2 x 5,1 4 x 6,1 4x 1,02 5,08 Notch Pin 1 2,54 4x0,5 2x 0,41 8,4 P1 mass: 2 g 2 x Ø3,5 6,3 2 x Ø2,3 7,1 dimensions in mm May 2008 / 593 11/12 www.sensortechnics.com 24PC/26PC Specials Pressure sensors with special fittings and sealings ORDERING INFORMATION 2x PC xxxx x x x x P2 sealing material E: EPDM N: Neoprene S: Silicone Pressure port B: Barbed C: Luer D: Modular G: Small flow through H: M5 thread I: 90° port J: Needle K: Reverse 90° port M: 1/4"-28UNF w/o cable lock S: Manifold 4: 6: non compensated compensated 0035: 0070: 0350: 1000: 2000: 7000: 17K0: 0050: 0100: 0250: 01K0: 02K0: 05K0: 10K0: 16K0: Pressure range 0 - 0.5 psi (34.5 mbar) 0 - 1 psi (69 mbar) 0 - 5 psi (345 mbar) 0 - 15 psi (1034 mbar) 0 - 30 psi (2068 mbar) 0 - 100 psi (6.9 bar) 0 - 250 psi (17.2 bar) 0 - 50 mbar 0 - 100 mbar 0 - 250 mbar 0 - 1 bar 0 - 2 bar 0 - 5 bar 0 - 10 bar 0 - 16 bar Pinning 2: dual inline pinning, 2 x 2 (not available for differential devices) 5: wire harness (available for flow through sensors only) 6: single inline pinning, 1 x 4 D: G: Pressure mode differential pressure gage pressure Note: Not all combinations are available ex stock. Minimum order quantities might be required. Please contact your nearest Sensortechnics sales representative for further information. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 12/12 May 2008 / 593 www.sensortechnics.com