24PC/26PC Specials
Pressure sensors with special fittings and sealings
FEATURES · 0...35 mbar to 0...17 bar gage or differential · High impedance bridge · Miniature package · Different pinning configurations · Usable for wet/wet applications1 MEDIA COMPATIBILITY1
All media compatible with port 1: - polyetherimide - silver-filled silicone - silicon nitride - polyetherimide - EPDM, neoprene or silicone - silicon
port 2:
SPECIFICATIONS
(supply voltage, temperature limits, lead temperature, humidity limits, mechanical shock, proof pressure...) AND
ELECTRICAL CONNECTION
PRESSURE SENSOR CHARACTERISTICS
(Vs=10.0 ±0.01 V, tamb=25°C, unless otherwise noted)
+Vs 1
see individual data sheets for 24PC or 26PC series
4
-
Output
Specification notes:
1. P1 of all "gage" devices are normally vented to atmosphere. P1 and P2 of differential devices might be used for "wet-wet" applications, but the media must be compatible with the materials specified under "MEDIA COMPATIBILITY".
2 3
+
May 2008 / 593
1/12
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Bx (Barbed, pinning 1 x 4)
12,7 7,9 4x0,5 1,27 3x2,54 Ø4,7 Ø3,2 2,29
P2
20,4
8,9
4x0,41
11,7
4x1,02
Notch Pin 1
mass: 2 g
Ø4,1
7,9
dimensions in mm
2xPCxxxxG2Bx (Barbed, pinning 2 x 2)
3 12,7 4 7,9 2 1 Ø4,7 Ø3,2 7,9
P2
20,4 8,9 Notch Pin 1 4x 1,02 5,08 6,3 4x0,41 2,54 4x0,5 8,4
dimensions in mm
mass: 2 g
2/12
May 2008 / 593
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Cx (Luer, pinning 1 x 4)
12,7 7,9 4x0,5 1,27 3x2,54 Ø4,6 Ø2,0 2,29
P2
18,8 8,9 4x0,41
11,7
4x1,02
Notch Pin 1
mass: 2 g
Ø4,6
7,9
dimensions in mm
2xPCxxxxG2Cx (Luer, pinning 2 x 2)
3 12,7 4 7,9 2 Ø4,6 Ø4,0 Ø2,0 7,9 1 20,4 P2 Notch Pin 1 4x 1,02 5,08 6,3 4x0,41 2,54 4x0,5 8,4
dimensions in mm mass: 2 g May 2008 / 593
8,9
3/12
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Dx (Modular, pinning 1 x 4)
12,7 Ø1,27
4x0,5 1,27 3x2,54 P2
2,29
11,7
4x1,02
Notch Pin 1
7,9
7,9 4x0,41
8,9
mass: 2 g
P1
dimensions in mm
2xPCxxxxG2Dx (Modular, pinning 2 x 2)
3 12,7 4 7,9 2 P2 Notch Pin 1 6,3 4x 1,02 5,08
mass: 2 g
1 7,9
8,9
4x0,41 2,54 4x0,5 8,4 P1
dimensions in mm
4/12
May 2008 / 593
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Hx (M5 thread, pinning 1 x 4)
Tightening torque3: Max. 67 Ncm
4x1,02
12,7
Ø1,3 7,9
4x0,5 1,27 3x2,54 M5
2,29
11,7
Notch Pin 1
7,9 Ø1,3 Ø7,2
12,7
P2
3,5
21,6
4x0,41
mass: 2 g dimensions in mm
2xPCxxxxG2Hx (M5 thread, pinning 2 x 2)
Tightening torque3: Max. 67 Ncm
3
12,7
4 7,9
2 M5
1 7,9 Ø1,3 Ø7,2
12,7
21,6
P2
3,5 Notch Pin 1
6,3
4x 1,02 5,08
4x0,41 2,54 4x0,5 8,4
dimensions in mm
mass: 2 g
Specification note:
3. Recommended O-ring: Ø 3,68 x 1,78, SH70, recommended counter bore dimensions: Ø 7,62 x 1,02 deep
May 2008 / 593
5/12
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Ix (90° port, pinning 1 x 4)
Ø5,1 Ø2,0 3,6 Notch Pin 1 2,29 1,27 3x2,54 1,3 8,0
P2
4x0,5
11,7
4x1,02
7,9
12,7
P2
14,6
9,1
4x0,41 12,7
mass: 2 g
P1
dimensions in mm
7,9
2xPCxxxxG2Ix (90° port, pinning 2 x 2)
Ø5,1 Ø2,0 3,6 4 1 12,7 1,3 8,0 7,9
P2
3
2
7,9
12,7
14,6
P2
9,7 4x 0,41 8,4
dimensions in mm
Notch Pin 1
4x 1,02 5,08
6,3
9,1
2,54 4x0,5
mass: 2 g
6/12
May 2008 / 593
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Jx (Needle, pinning 1 x 4)
12,7 7,9 4x0,5 1,27 3x2,54 Ø6,4 Ø1,78 Ø0,5 2,29 22,1
P2
4x0,41
mass: 2 g
11,7
4x1,02
Notch Pin 1
P1
7,9
dimensions in mm
2xPCxxxxG2Jx (Needle, pinning 2 x 2)
3 12,7 4 7,9 2 Ø6,4 Ø1,78 Ø0,5 7,9 1 22,1
P2
Notch Pin 1 4x 1,02 5,08 4x 0,41 2,54 4x0,5 8,4 6,3 8,9
P1
dimensions in mm
mass: 2 g
May 2008 / 593
7/12
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Kx (Inverse 90° port, pinning 1 x 4)
12,7 7,9 4x0,5 1,3 8,0 2,29 Ø5,1 Ø2,0 3,6 11,7 Notch Pin 1
P2
9,7 7,9
14,6
9,1
7,9
4x0,41 12,7 1,8
P1
dimensions in mm
mass: 2 g
2xPCxxxxG2Kx (Inverse 90° port, pinning 2 x 2)
3 12,7 4 7,9 2 1 1,3 Ø5,1 Ø2,0
8,0
P2
3,6 P2 9,7
14,6
9,1
Notch Pin 1 2,54 4x0,5
4x 1,02 5,08
6,3
16,0 4x0,41 8,4 12,7
P1
dimensions in mm
mass: 2 g
8/12
May 2008 / 593
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Mx (¼-28 UNF thread, pinning 1 x 4)
Tightening torque3: Max. 135 Ncm
12,7 7,9 4x0,5 3x2,54 Ø1,3 Ø5,0 Ø9,1 1,27 2,29 11,7 1/4-28UNF 4x1,02 Notch Pin 1
P2
23,9
15,7 12,4 8,9
4x0,41
mass: 2 g
7,9
dimensions in mm
2xPCxxxxG2Mx (¼-28 UNF thread, pinning 2 x 2)
3
12,7
4 7,9
Tightening torque3: Max. 135 Ncm
2 Ø1,3 Ø5,0 Ø9,1
1 1/4-28UNF 7,9
P2
23,9
15,7 12,4 8,9
6,3
4x 1,02 5,08
Notch Pin 1 4x0,41 8,4 2,54 4x0,5
dimensions in mm
mass: 2 g
Specification note:
3. Recommended O-ring: Ø 5,28 x 1,78, SH70, recommended counter bore dimensions: Ø 9,14 x 1,78 deep
May 2008 / 593
9/12
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR GAGE DEVICES
2xPCxxxxG6Sx (Manifold, pinning 1 x 4)
12,7 7,9 4x0,5 3x2,54 1,27 Ø1,27 Ø6,35 Ø9,1 8,4 13,7 2,29 1,27 11,7 4x1,02 Notch Pin 1
P2
3,05
8,9
4x0,41
P1
7,9
mass: 2 g dimensions in mm
2xPCxxxxG2Sx (Manifold, pinning 2 x 2)
3
12,7
4 7,9
2
1 Ø1,27 Ø6,35 Ø9,1
1,27 3,05
P2
7,9
8,9
6,3
4x 1,02
8,4 13,7 Notch Pin 1 2,54 4x0,5 5,08
4x0,41 8,4
P1
mass: 2 g
dimensions in mm
10/12
May 2008 / 593
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
OUTLINE DRAWINGS FOR FLOW THROUGH HOUSINGS
2xPCxxxxG6Gx (Barbed, pinning 1 x 4)
P2
P2 4x0,5 1,27 3x2,54 R3,2 1,78 12,7 2,29
11,7
4x1,02
Notch Pin 1
7,9
25,6 2 x Ø3,5 2 x 5,1 2 x Ø2,3 2 x 0,41 1,8 2 x 8,9
8,9
7,1
P1
mass: 2 g
4 x 2,8 4 x 15,4
dimensions in mm
2xPCxxxxG2Gx (Barbed, pinning 2 x 2)
3
P2
4 7,9 2 1
P2
R3,2 Ø1,78 8,9 12,7
25,6 2 x 8,9 2 x 5,1
4 x 6,1
4x 1,02 5,08
Notch Pin 1 2,54 4x0,5
2x 0,41 8,4
P1
mass: 2 g
2 x Ø3,5
6,3
2 x Ø2,3
7,1
dimensions in mm
May 2008 / 593
11/12
www.sensortechnics.com
24PC/26PC Specials
Pressure sensors with special fittings and sealings
ORDERING INFORMATION
2x
PC
xxxx
x
x
x
x
P2 sealing material E: EPDM N: Neoprene S: Silicone Pressure port B: Barbed C: Luer D: Modular G: Small flow through H: M5 thread I: 90° port J: Needle K: Reverse 90° port M: 1/4"-28UNF w/o cable lock S: Manifold
4: 6:
non compensated compensated
0035: 0070: 0350: 1000: 2000: 7000: 17K0: 0050: 0100: 0250: 01K0: 02K0: 05K0: 10K0: 16K0:
Pressure range 0 - 0.5 psi (34.5 mbar) 0 - 1 psi (69 mbar) 0 - 5 psi (345 mbar) 0 - 15 psi (1034 mbar) 0 - 30 psi (2068 mbar) 0 - 100 psi (6.9 bar) 0 - 250 psi (17.2 bar) 0 - 50 mbar 0 - 100 mbar 0 - 250 mbar 0 - 1 bar 0 - 2 bar 0 - 5 bar 0 - 10 bar 0 - 16 bar
Pinning 2: dual inline pinning, 2 x 2 (not available for differential devices) 5: wire harness (available for flow through sensors only) 6: single inline pinning, 1 x 4
D: G:
Pressure mode differential pressure gage pressure
Note: Not all combinations are available ex stock. Minimum order quantities might be required. Please contact your nearest Sensortechnics sales representative for further information.
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
12/12
May 2008 / 593
www.sensortechnics.com
