26PC0070D6

26PC Series (psi) Temp. compensated and calibrated pressure sensors FEATURES · 0...1 to 0...250 psi gage or differential · High impedance bridge · Miniature package · Different pinning configurations · Usable for wet/wet applications8 SERVICE All media compatible with port 1: - polyetherimide - silver-filled silicone - silicon nitride - polyetherimide - fluor-silicone - silicon Scale: 1 cm 1 inch port 29: SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Lead temperature (10 sec. soldering) Humidity limits Vibration (MIL-STD-202, Meth. 213) 16 V ELECTRICAL CONNECTION -55 to +100°C -40 to +85°C 300°C 0...100 %RH Vs 1 4 - 150 g half sine 11 msec. 150 g Output 2 3 + Mechanical shock (qualification tested) Proof pressure1 all 1 and 5 psi devices all 15 psi devices all 30 psi devices all 100 psi devices all 250 psi devices January 2004 / 597 20 psi 45 psi 60 psi 200 psi 500 psi 1/4 www.sensortechnics.com 26PC Series (psi) Temp. compensated and calibrated pressure sensors PRESSURE SENSOR CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 20°C (unless otherwise noted) Listing 26PCAFAxx 26PCBFAxx 26PCCFAxx 26PCDFAxx 26PCFFAxx 26PCGFAxx Order number 26PC0070xxA 26PC0350xxA 26PC1000xxA 26PC2000xxA 26PC7000xxA 26PC17K0xxA Operating pressure 0 - 1 psi (69 mbar) 0 - 5 psi (345 mbar) 0 - 15 psi (1034 mbar) 0 - 30 psi (2068 mbar) 0 - 100 psi (6.9 bar) 0 - 250 psi (17.2 bar) Min. 14.7 mV 47 mV 97 mV 97 mV 95 mV 143 mV Full-scale span2 Typ. 16.7 mV 50 mV 100 mV 100 mV 100 mV 150 mV Max. 18.7 mV 53 mV 103 mV 103 mV 105 mV 157 mV COMMON PERFORMANCE CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 25°C (unless otherwise noted) Characteristics Zero pressure offset Temperature effects (0 - 50°C)4 Offset all 100 psi devices all other devices all 1 to 15 psi devices all 30 psi devices all other devices all 1 psi devices all other devices all 1 to 15 psi devices all 30 psi devices all other devices Min. -2.0 -1.5 Typ. Max. +2.0 +1.5 Unit Span Linearity (P2 > P1, BSL)3 Repeatability and hysteresis5 Long term stability7 Input impedance Output impedance Response time6 5.5 1.5 ±0.5 ±0.75 ±1.0 ±1.0 ±0.75...±1.0 ±0.25 ±0.1 ±0.1 ±0.2 ±0.5 7.5 2.5 ±1.0 ±1.5 ±2.0 ±2.0 ±1.5 ±0.5 ±0.2 ±0.7 mV % sp a n 11.5 3.0 1.0 kΩ ms Specification notes: 1. The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. 2. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. 3. Linearity (BSL), the deviation of measured output at constant temperature (25°C) from "Best Straight Line" determined by three points, offset pressure, full-scale pressure and half full-scale pressure. V - Voffset [ V½ full scale – { (full full scale pressure) scale x (½ full scale pressure) + Voffset }] : 2 (Vfull scale) x 100 % where: V = measured value for each device 4. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading. 5. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant. Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). 6. Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. 7. Long term stability of offset and span over a period over one year. 8. The sensors might be used on both ports, for media compatible with the components, specified under "Service" (page 1). 9. Other sealing materials are available on request. Minimum order quantities might be required. 10. Other pressure port styles, like barbed ones, luers, modular, M5, needle style or flow through connection, are available on request. Minimum order quantities might be required. 2/4 January 2004 / 597 www.sensortechnics.com 26PC Series (psi) Temp. compensated and calibrated pressure sensors OUTLINE DRAWINGS10 26PCxxxxG6A (single inline pinning, 1 x 4), gage pressure devices 12,7 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 7,9 2,29 4 x 1,02 P2 1,78 4 x 0,41 4321 3 x 2,54 mass: 2 g 21,8 16,2 9,1 NOM 15,2 12,7 dimensions in mm 26PCxxxxG2A (dual inline pinning, 2 x 2), gage pressure devices 12,7 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 PIN 2 P2 PIN 3 PIN 4 7,9 4 x 1,02 5,1 mass: 2 g 27,9 21,8 16,2 9,1 4 x 0,5 12,7 4 x 0,41 8,4 dimensions in mm January 2004 / 597 3/4 www.sensortechnics.com 26PC Series (psi) Temp. compensated and calibrated pressure sensors OUTLINE DRAWINGS10 26PCxxxxD6A (single inline pinning, 1 x 4), differential pressure devices 12,7 Ø 6,4 Ø 5,1 Ø 1,93 Ø 1,27 PIN 1 7,9 2,29 4 x 1,02 16,2 9,1 P2 1,78 4 x 0,41 4321 3 x 2,54 34,4 21,8 11,7 mass: 2 g P1 12,7 NOM 15,2 dimensions in mm ORDERING INFORMATION 2 26PC series compensated Pressure range 0 - 1 psi (69 mbar) 0 - 5 psi (345 mbar) 0 - 15 psi (1034 mbar) 0 - 30 psi (2068 mbar) 0 - 100 psi (6.9 bar) 0 - 250 psi (17.2 bar) Pinning 2: dual inline pinning, 2 x 2 (not available for differential devices) 6: single inline pinning, 1 x 4 6 PC xxxx x x A10 Pressure port (Ø 5.1 mm) 0070: 0350: 1000: 2000: 7000: 17K0: Pressure mode D: differential pressure G: gage pressure Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 4/4 January 2004 / 597 www.sensortechnics.com