914121241000

Ten-X® 10 mm switching soleniod valve FEATURES · 3-way, 2 position (NO, NC & Distributor) · Optional ‘Hit and Hold’ drive electronics using pulse width modulation (PWM) at 25-32 kHz · Minimum flow of 8 lpm @ 6 psi and 22 lpm @ 30 psi · 10 mm single piece body design · Barbed pressure ports allow for direct tubing or manifold assemblies · RoHS compliant MEDIA COMPATIBILITY Non-reactive gases WETTED MATERIALS PBT (polybutylene terephthalate) glass filled; 430FR series stainless steel; 302 series stainless steel; Viton (FKM) or silicone elastomer PHYSICAL PROPERTIES Operating environment (continuous duty) 0 to 50 °C Storage temperature Spacing -40 to 70 °C 10 mm (centerline) Barbs for 1.98 mm (0.078 in) I.D. tubing or manifold mount with gasket ELECTRICAL Power Voltage Electrical connections 0.5 W 5, 12, 24 VDC PC pins Porting Weight without electronics with electronics Internal volume 10.7 g 12 g 0.131 cm3 (0.0080 in3) Ten-X is a registered trademark of Parker Hannifin Corporation. E / 11260 / A 1/4 www.sensortechnics.com Ten-X® 10 mm switching soleniod valve PERFORMANCE CHARACTERISTICS Part no. 914-1... (silicone elastomer) 914-2... (Viton elastomer) Pressure 0...6 psi 0...6 psi, 0...20 psi, 0...30 psi Minimum flow Orifice siz es/ Equivalent CV1 Leak rate2 Response ≤0.016 sccm