ASDX005G24R-A

ASDX Series A-grade Signal conditioned high precision pressure transducers FEATURES · 0...1 to 0...100 psi, 0...±1 to 0...±15 psi · Absolute, gage or differential pressure · 0.5 to 4.5 V ratiometric output · Precision ASIC conditioning · Temperature compensated · Total accuracy ±0.5 to ±1.0 %FSS SPECIFICATIONS Maximum ratings Supply voltage VS Output current Sink Source Lead temperature (2 - 4 sec.) Temperature ranges Compensated Operating Storage Vibration Shock 4.75 V to 5.25 VDC max. 6.50 VDC 2 mA 2 mA 250°C 0 to +85 °C -20 to +105 °C -40 to +125 °C 10 g at 20 - 2000 Hz 100 g for 11 ms ELECTRICAL CONNECTION N/C 567 1 +Vs ASDX A-grade 2 Vout 15 nF 220 nF 3 84 GND N/C Note: Caution! The sensor is not reverse polarity protected. Incorrect applications of excitation voltage or ground to the wrong pin can cause electrical failure. Application of supply voltage above the maximum can cause electrical failure. Capacitor 220 nF required between +Vs and GND and 15 nF between Vout and GND. It is important to place the capacitors as close to the pins as possible! Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason! February 2009 / 609 1/5 www.sensortechnics.com ASDX Series A-grade Signal conditioned high precision pressure transducers PRESSURE RANGES SPECIFICATIONS (VS = 5.0 VDC, TA = 25°C) Part number ASDX015A24R-A ASDX030A24R-A ASDX100A24R-A ASDX001G24R-A / D44R-A ASDX005G24R-A / D44R-A ASDX015G24R-A / D44R-A ASDX030G24R-A / D44R-A ASDX100G24R-A / D44R-A ASDX001D44D-A ASDX005D44D-A ASDX015D44D-A Pressure range 0 to 15 0 to 30 0 to 100 0 to 1 0 to 5 0 to 15 0 to 30 psi(g,d) 0 to 100 0 to ±1 0 to ±5 0 to ±15 psi(a) Burst pressure1 30 60 150 5 20 30 60 psi(g,d) 150 5 20 30 psi(a) Sensitivity (typ.) 0.27 0.13 0.04 4.00 0.80 0.27 0.13 0.04 2.00 0.40 0.13 V/psi Specification notes: 1. If maximum burst pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may fracture. 2. Full Scale Span (FSS) is the algebraic difference between the output signal for the highest and lowest specified pressure. Span is ratiometric to the supply voltage. 3. Total accuracy is the combined error of offset and span calibration, linearity, pressure hysteresis and temperature effects. Linearity is the measured deviation based on a straight line. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. Calibration errors include the deviation of offset and full scale from nominal values. 4. Delay time between sampling and signal change at the output. 5. The smallest change in the output voltage, given any change in pressure. February 2009 / 609 2/5 www.sensortechnics.com ASDX Series A-grade Signal conditioned high precision pressure transducers PERFORMANCE CHARACTERISTICS 0.5 to 4.5 ratiometric output (VS = 5.0 VDC, TA = 25°C) All ASDX...A24R-A, ...G24R-A, ...D44R-A Characteristics Zero pressure offset ASDX001... all others Full scale span (FSS)2 Full scale output ASDX001... all others Total accuracy (0 to 85°C)3 ASDX001... all others Sample rate Response delay4 Quantization step5 Current consumption Min. 0.46 0.48 Typ. 0.50 0.50 4.00 Max. 0.54 0.52 Units V 4.54 4.52 ±1.0 %FSS ±0.5 4.46 4.48 4.50 4.50 100 2.73 2 6 14.11 Hz ms mV mA All ASDX...D44D-A Characteristics Zero pressure offset ASDX001... all others Full scale span (FSS)2 Output at max. specified pressure ASDX001... all others at min. specified pressure ASDX001... all others Total accuracy (0 to 85°C)3 ASDX001... all others Sample rate Response delay45 Quantization step5 Current consumption Min. 2.46 2.48 Typ. 2.50 2.50 4.00 Max. 2.54 2.52 Units 4.46 4.48 0.46 0.48 4.50 4.50 0.50 0.50 4.54 4.52 0.54 0.52 ±1.0 V %FSS ±0.5 100 2.73 2 6 14.11 Hz ms mV mA February 2009 / 609 3/5 www.sensortechnics.com ASDX Series A-grade Signal conditioned high precision pressure transducers PHYSICAL DIMENSIONS D4 package 1.27 typ (0.050 typ) 16.89 (0.665) 7.87 typ (0.310 typ) 13.97 (0.550) 3.63 (0.143) 8.13 8.89 (0.350) (0.320) 1.78 (0.070) 16.64 ±0.64 (0.655 ±0.025) 2.29 (0.090) High pressure port Low pressure port 3.38 (0.133) 8.26 typ (.325 typ) 0.51 typ (0.02 typ) 2.54 typ (0.100 typ) 4.5 (0.177) G2 package 6.99 (0.275) 3.15 (0.124) 1.27 typ (0.050 typ) 13.97 (0.550) 2 ° typ 16.89 (0.665) 4.9 (0.193) 2.29 typ (0.090 typ) 2.79 typ (0.11 typ) 1.19 typ (0.047 typ) 8.89 5.08 (0.350) (0.200) 16.64 ±0.64 (0.655 ± 0.025) 0.51 typ (0.02 typ) 4.5 (0.177) 2.54 typ (0.100 typ) A2 package 1.27 typ (0.050 typ) 13.97 (0.550) 2.29 typ (0.090 typ) 8.0 typ (0.315 typ) 8.89 (0.350) 0.51 typ (0.02 typ) 2.54 typ (0.100 typ) 16.89 (0.665) 8.46 (0.333) 16.64 ±0.64 (0.655 ±0.025) 4.5 (0.177) third angle projection February 2009 / 609 dimensions in mm (inches) 4/5 www.sensortechnics.com ASDX Series A-grade Signal conditioned high precision pressure transducers ELECTRICAL CONNECTIONS ASDX...D4... Vs (pin 1) identifier N/C N/C N/C N/C +Vs Vout GND N/C ASDX...G24R-A Vs (pin 1) identifier +Vs Vout GND N/C N/C N/C N/C N/C ASDX...A24R-A Vs (pin 1) identifier Note: Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason! N/C N/C N/C N/C +Vs Vout GND N/C ORDERING INFORMATION Pressure range 0 to 1 psi 0 to 5 psi 0 to 15 psi 0 to 30 psi 0 to 100 psi 0 to ±1 psi 0 to ±5 psi 0 to ±15 psi ASDX015A24R-A ASDX030A24R-A ASDX100A24R-A Absolute Gage ASDX001G24R-A ASDX005G24R-A ASDX015G24R-A ASDX030G24R-A ASDX100G24R-A Differential/Gage ASDX001D44R-A ASDX005D44R-A ASDX015D44R-A ASDX030D44R-A ASDX100D44R-A ASDX001D44D-A ASDX005D44D-A ASDX015D44D-A Other pressure ranges or calibrations are available on request Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. February 2009 / 609 5/5 www.sensortechnics.com