BTE6001G5

BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters FEATURES · 0...-1 to 0...350 bar, 0...-15 to 0...5000 psi gage1 or absolute11 · For corrosive media · Flush mount versions · 0...10 V, 1...6 V, 0...20 mA, 4...20 mA output · Field interchangeable · For harsh environments MEDIA COMPATIBILITY Wetted materials: stainless steel 1.4404 (316L), NBR12 Housing: stainless steel 1.4404 (316L), protection class IP 65 (according to DIN EN 60529) respectively NEMA 4X1 ELECTRICAL CONNECTION 0...10 V, 1...6 V output +Vs sensor 1 Vout 3 -Vs 2 13 to 30 V V SPECIFICATIONS9,10 Maximum ratings 0...20 mA output GND Supply voltage (reverse polarity protection) 13...30 V BTE(M)/PTU6...0, ...1 12...36 V BTE(M)/PTU6...4, ...52 Maximum load current BTE(M)/PTU6...0, ...1 Temperature limits Storage Operating Compensated Humidity limits Vibration (5 to 500 Hz) Mechanical shock Proof pressure 3 sensor 10 mA -55 to 100°C -40 to 100°C 0 to 70°C 0 - 95 %RH 10 gRMS 50 g 2 x rated pressure sensor +Vs 1 Iout 3 -Vs 2 12 to 36 V RL V GND 4...20 mA output +Vs 1 N/C 3 -Vs 2 12 to 36 V V RL GND December 2008 / 102 1/8 www.sensortechnics.com BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters COMMON PERFORMANCE CHARACTERISTICS1 Characteristics Operating pressure BTEM6200... BTEM6350... BTE6001... BTE6N01... BTE6P01... BTE6002... BTE6005... BTE6010... BTE6016... BTE6035... BTE6070... BTE6350... PTU6003... PTU6005... PTU6015... PTU6N15... PTU6P15... PTU6030... PTU6100... PTU6250... PTU6500... PTU61K0... PTU65K0... Thermal effects (0 to 70°C)4 200/300 mbar, 3/5 psi only Thermal effects (-40 to 0°C, 70 to 100°C) Non-linearity and hysteresis (BSL)5 Repeatability Long term stability6 Output noise (0 < f < 1 kHz) Response time (10 to 90 %) Power supply rejection Offset Span Offset Span Offset Span Offset Span 0.03 0.03 ±0.1 ±0.1 ±0.2 ±0.04 1 0.05 0.05 ms %FSO/V ±0.5 %FSO Min. 0 0 0 -1 -1 0 0 0 0 0 0 0 0 0 0 -15 -15 0 0 0 0 0 0 Typ. Max. 200 350 1 +1 0 2 5 10 16 35 70 350 3 5 15 +15 0 30 100 250 500 1000 5000 Unit mbar bar p si 0.01 0.01 0.03 0.03 0.06 0.04 %FSO/°C December 2008 / 102 2/8 www.sensortechnics.com BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters INDIVIDUAL PERFORMANCE CHARACTERISTICS1 0...10 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 Output impedance Power consumption (no load) BTE/PTU6N... all others BTE/PTU6N... all others Min. 4.85 -0.15 4.9 9.9 Typ. 5.0 0 5.0 10.0 100 Max. 5.15 0.15 5.1 10.1 50 Unit V Ω mW 1...6 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 Output impedance Power consumption (no load) BTE/PTU6N... all others BTE/PTU6N... all others Min. 3.35 0.85 2.4 4.9 Typ. 3.5 1.0 2.5 5.0 6.0 100 Max. 3.65 1.15 2.6 5.1 50 Unit V Ω mW 4...20 mA output (VS = 15 V, RL = 100 Ω, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 Output impedance Power consumption (IL = 20 mA) BTE/PTU6N... all others BTE/PTU6N... all others Min. 11.85 3.85 7.9 15.9 Typ. 12.0 4.0 8.0 16.0 0.1 260 Max. 12.15 4.15 8.1 16.1 Unit mA Ω mW 0...20 mA output (VS = 15 V, RL = 100 Ω, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 Output impedance Power consumption (IL = 20 mA) BTE/PTU6N... all others BTE/PTU6N... all others Min. 9.85 -0.15 9.9 19.9 Typ. 10.0 0 10.0 20.0 0.1 260 Max. 10.15 0.15 10.1 20.1 Unit mA Ω mW December 2008 / 102 3/8 www.sensortechnics.com BTE6000 / PTU6000 Series Precision stainless steel pressure transmitters Specification notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. IP 65 protection is given when the connector is locked with a rubber washer. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. Thermal effects tested and guaranteed from 0 to 70°C relative to 25°C. All specifications shown are relative to 25°C. Non-linearity refers to the B est S traight L ine fit measured for offset, full scale span and 1/2 full scale span. Long term stability is the change in output after one year or 1 million pressure cycles. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. Test are in accordance with EN61000-6-2, April 1999. CE-labelling is in accordance with 89/336/EEC. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC. Available for pressure ranges from 1 bar (15 psi) absolute upwards only. Other sealing materials are available on request. ELECTROMAGNETIC CAPABILITY8 Radiated, radio frequency electromagnetic field immunity (RFI) Electrical fast transient / burst immunity (EFT) Electrostatic discharge immunity test (ESD) Immunity to conducted disturbances induced by radio-frequency fields Test conditions Criterion Interference EN61000-4-3: Grade 3, 10 V/m, 80 to 1000 MHz A