BTEL5002D1C

BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters FEATURES · 1 to 10 mbar, 1 to 10 "H2O differential pressure · High level output, 1...6 V or 4...20 mA (2-wire connection) · Precision temperature compensated and calibrated · Rugged aluminium housing · Female 1/8" BSP and 1/8" NPT fittings MEDIA COMPATIBILITY Pressure inlet: Non-corrosive, non-ionic working fluids such as air, dry gases and the like Housing: Aluminium, protection class IP 67 (according to DIN EN 60529) respectively NEMA 61 ELECTRICAL CONNECTION SPECIFICATIONS12 Maximum ratings +Vs 1...6 V output version 1 12 to 32 V Supply voltage Output current BTEL/PTUL5...D1... Source Sink BTEL/PTUL5...D4... Temperature limits Storage Operating Compensated Proof pressure2 BTEL/PTUL5...01D... BTEL/PTUL5...02D... all others Pressure at any port3 BTEL/PTUL5...01D... BTEL/PTUL5...02D... all others 11 12 to 32 V sensor 2 Vout 4 GND -Vs 3 case V 20 mA 10 mA 30 mA -40 to 100°C -25 to 85°C 0 to 50°C 250 mbar / 100 "H2O 250 mbar / 100 "H2O 350 mbar / 150 "H2O 500 mbar / 200 "H2O 500 mbar / 200 "H2O 750 mbar / 300 "H2O 4...20 mA output version 1 +Vs sensor 4 -Vs 3 case V 12 to 32 V RL GND June 2008 / 094 1/6 www.sensortechnics.com BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters COMMON PERFORMANCE CHARACTERISTICS9 Characteristics Operating pressure BTEL5001... BTEL5P01... BTEL5002... BTEL5P02... BTEL5005... BTEL5P05... BTEL5010... BTEL5P10... PTUL5001... PTUL5P01... PTUL5002... PTUL5P02... PTUL5005... PTUL5P05... PTUL5010... PTUL5P10... Position sensitivity Non-linearity and hysteresis4 Output noise (0 < f < 1 kHz) Long term stability5 BTEL/PTUL5...01D... all others Thermal effects (0 to 50°C)6 Offset BTEL5...01D... BTEL5...02D.../ PTUL5...01D... all others Span Response time (10 to 90 %) Min. 0 -1 0 -2 0 -5 0 -10 0 -1 0 -2 0 -5 0 -10 Typ. Max. 1 1 2 2 Unit mbar 5 5 10 10 1 1 2 2 5 5 10 10 0.5 ±0.1 0.04 %FSO ±0.5 ±0.2 ±0.08 ±0.04 ±0.02 ±0.04 1 ±0.16 ±0.10 %FSO/°C ±0.06 ±0.08 ms ±0.25 %FSO/g "H2O June 2008 / 094 2/6 www.sensortechnics.com BTEL5000 / PTUL5000 Series Precision very low differential pressure transmitters PERFORMANCE CHARACTERISTICS9 1...6 V output versions (unless otherwise noted VS = 15 V, tamb = 25°C, RL > 100 kΩ, com. mode pressure = 0) Characteristics Zero pressure offset Full scale span8 Full scale output Output impedance Power supply rejection Power consumption Offset Span 7 Min. BTEL/PTUL50...D1... BTEL/PTUL5P...D1... BTEL/PTUL50...D1... BTEL/PTUL5P...D1... 0.9 3.4 4.9 2.4 Typ. 1.0 3.5 5.0 2.5 6.0 0.05 0.03 60 Max. 1.1 3.6 5.1 2.6 50 Unit V Ω %FSO/V mW 4...20 mA output versions (unless otherwise noted VS = 15 V, tamb = 25°C, RL = 100 Ω, com. mode pressure = 0) Characteristics Zero pressure offset Full scale span8 Full scale output Output impedance Power supply rejection Power consumption (IL = 20 mA) Offset Span 7 Min. BTEL/PTUL50...D4... BTEL/PTUL5P...D4... BTEL/PTUL50...D4... BTEL/PTUL5P...D4... 3.9 11.9 15.9 7.9 Typ. 4.0 12.0 16.0 8.0 20.0 0.05 0.03 260 Max. 4.1 12.1 16.1 8.1 0.1 Unit mA Ω %FSO/V mW ELECTROMAGNETIC CAPABILITY10 Test conditions Radiated, radio frequency electromagnetic field immunity (RFI) Electrical fast transient / burst immunity (EFT) Electrostatic discharge immunity test (ESD) Immunity to conducted disturbances induced by radio-frequency fields EN61000-4-3: Grade 3 10 V/m, 80 MHz to 1000 MHz 80 % AMC (1 kHz) Grade 3 ±2 kV Grade 4 ±8 kV, contact discharge Grade 3 0,15 to 80 MHz 10 V, 80 % AMC (1 kHz) Criterion A B B A Interference