BTEM6500A5CXS

BTE6000 / PTU6000...CS Series Submersible precision stainless steel transmitters FEATURES · 0...100 mbar to 0...10 bar, 0...2 to 0...150 psi gage or absolute · For corrosive media · 0...10 V, 1...6 V, 0...20 mA or 4...20 mA output · Field interchangeable · For harsh environments MEDIA COMPATIBILITY Wetted materials: stainless steel 1.4404 (316L), PVC, PUR, NBR11 Housing: protection class IP 68 (according to DIN EN 60529) respectively NEMA 6P1 ELECTRICAL CONNECTION 0...10 V, 1...6 V output +Vs red Vout yellow -Vs black bare 13 to 30 V SPECIFICATIONS9,10 Maximum ratings Supply voltage (reverse polarity protection) 13...30 V BTE(M)/PTU6...0..., 1... 12...36 V BTE(M)/PTU6...4..., 5...2 Maximum load current BTE(M)/PTU6...0..., 1... Temperature limits Storage Operating Compensated Vibration (5 to 500 Hz) Mechanical shock Proof pressure3 sensor V GND 0...20 mA output +Vs red Iout blue -Vs black bare 12 to 36 V sensor 10 mA RL V GND -40 to 85°C -25 to 85°C 0 to 70°C 10 gRMS 50 g 2 x rated pressure 4...20 mA output +Vs red sensor -Vs black bare V 12 to 36 V RL GND August 2008 / 104 1/6 www.sensortechnics.com BTE6000 / PTU6000...CS Series Submersible precision stainless steel transmitters COMMON PERFORMANCE CHARACTERISTICS1 Characteristics Operating pressure BTEM6100... BTEM6250... BTEM6350... BTEM6500... BTE6001... BTE6002... BTE6005... BTE6010... PTU6002... PTU6003... PTU6005... PTU6010... PTU6015... PTU6030... PTU6050... PTU6100... PTU6150... Thermal effects (0 to 70°C) 4 Min. 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Typ. Max. 100 250 350 500 1 2 5 10 2 3 5 10 15 30 50 100 150 Unit mbar bar p si Offset Span Offset Span 0.02 0.02 0.03 0.03 ±0.1 ±0.1 ±0.2 ±0.04 1 0.04 0.04 %FSO/°C (-25 to 0°C, 70 to 85°C) Non-linearity and hysteresis (BSL) Repeatability Long term stability 6 5 0.25 %FSO Output noise (0 < f < 1 kHz) Response time (10 to 90 %) Power supply rejection Offset Span ms %FSO/V 0.05 0.05 August 2008 / 104 2/6 www.sensortechnics.com BTE6000 / PTU6000...CS Series Submersible precision stainless steel transmitters INDIVIDUAL PERFORMANCE CHARACTERISTICS1 0...10 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span 7 Min. -0.15 9.9 Typ. 0 10.0 100 Max. 0.15 10.1 50 Unit V Ω mW Output impedance Power consumption (no load) 1...6 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 Full scale output Output impedance Power consumption (no load) Min. 0.85 4.9 Typ. 1.0 5.0 6.0 Max. 1.15 5.1 50 Unit V Ω mW 100 4...20 mA output (VS = 15 V, RL > 100 Ω, tamb = 25°C) Characteristics Zero pressure offset Full scale span 7 Min. 3.85 15.9 Typ. 4.0 16.0 0.1 260 Max. 4.15 16.1 Unit mA Ω mW Output impedance Power consumption (IL = 20 mA) 0...20 mA output (VS = 15 V, RL > 100 Ω, tamb = 25°C) Characteristics Zero pressure offset Full scale span 7 Min. -0.15 19.9 Typ. 0 20.0 0.1 260 Max. 0.15 20.1 Unit mA Ω mW Output impedance Power consumption (IL = 20 mA) August 2008 / 104 3/6 www.sensortechnics.com BTE6000 / PTU6000...CS Series Submersible precision stainless steel transmitters ELECTROMAGNETIC CAPABILITY8 Test conditions Radiated, radio frequency electromagnetic field immunity (RFI) Electrical fast transient / burst immunity (EFT) Electrostatic discharge immunity test (ESD) Immunity to conducted disturbances induced by radio-frequency fields EN61000-4-3: Grade 3 10 V/m, 80 MHz to 1000 MHz 80 % AMC (1 kHz) Grade 3 ±2 kV Grade 4 ±8 kV, contact discharge Grade 3 0,15 to 80 MHz 10 V, 80 % AMC (1 kHz) Criterion A Interference