CPCL04GFC

CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output FEATURES · 0...4 "H2O to 0...150 psi gage or differential, 0...15 to 0...150 psi absolute · Precision temperature compensated · Calibrated offset and span · Voltage excitation · Excellent long term stability SERVICE Non-corrosive, non-ionic working fluids such as clean dry air, dry gases and the like. The media wetted materials are: port 1: - front side of silicon sensor chip - glass filled nylon - RTV - silgel (for devices of 5 psi and above) - ceramic (Al2O3) port 2: - silicon sensor chip - glass filled nylon - RTV - ceramic (Al2O3) EQUIVALENT CIRCUIT +Vs 3 ELECTRICAL CONNECTION -Vout 4 +Vout 2 1 -Vs Pin 1: -Vs Pin 2: +Vout Pin 3: +Vs Pin 4: -Vout June 2008 / 613 1/6 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output SPECIFICATIONS Maximum ratings (for all devices) Supply voltage VS Lead temperature (soldering 5 seconds) Common mode pressure 3 to 16 V 315 °C 50 psig Environmental specifications (for all devices) Temperature range Compensated Operating Storage Humidity limits (non-condensing) 0 to 70 °C -25 to 85 °C -40 to 125 °C 0 to 95 %RH PRESSURE SENSOR CHARACTERISTICS VS = 12 V, TA = 25°C, pressure applied to port P1 Part no. CPCL04... CPCL10... CPC0.3... CPC01... CPC05... CPC15... CPC30... CPC60... CPC100... CPC150... Operating pressure 4 "H2O 10 "H2O 0.3 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 1 5 0 p si Proof pressure1 3 p si 3 p si 3 p si 3 p si 1 5 p si 4 5 p si 9 0 p si 1 8 0 p si 2 5 0 p si 2 5 0 p si Burst pressure2 5 p si 5 p si 5 p si 5 p si 2 5 p si 7 5 p si 1 5 0 p si 3 0 0 p si 4 0 0 p si 4 0 0 p si Full scale span3 Min. 23 mV 19 mV 19 mV 17 mV 57 mV 85 mV 85 mV 85 mV 95 mV 85 mV Typ. 25 mV 20 mV 20 mV 18 mV 60 mV 90 mV 90 mV 90 mV 100 mV 90 mV Max. 27 mV 21 mV 21 mV 19 mV 63 mV 95 mV 95 mV 95 mV 105 mV 95 mV 2/6 June 2008 / 613 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output PERFORMANCE CHARACTERISTICS VS = 12 V, TA = 25°C, pressure applied to port P1 Characteristics Zero pressure offset Combined non-linearity and hysteresis4 Temperature effects (0 to 70°C)5 Span Offset Input resistance Output resistance Response time (10 to 90 %FSS) CPCL... CPC... Common mode voltage6 Min. -1.0 Typ. 0 ±0.25 Max. +1.0 ±1.0 Unit mV %FSS ±2.0 ±1.0 5 3 500 µs 100 6 V mV kΩ Notes 1 2 3 Proof pressure is the maximum pressure which may be applied without causing durable shifts of the electrical parameters of the sensing element. Burst pressure is the maximum pressure which may be applied without causing damage to the sensing element or leaks from the housing. Full scale span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. The span is ratiometric to the supply voltage. Non-linearity refers to the Best Straight Line fit measured for offset pressure, full-scale pressure and ½ full-scale pressure. Shift is relative to 25°C. The CPCL04... has a compensated temperature range from 0 to 50°C. This is the common-mode voltage of the output arms (pins 2 and 4) for VS = 12 V. 4 5 6 June 2008 / 613 3/6 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output OUTLINE DRAWING Package version G and A (no port) 9.9 (0.39) 8.9 (0.35) 7.6 (0.30) 4.1 (0.16) 9.9 (0.39) 2.8 (0.11) 0.6 (0.03) P1 Vent hole (P2) (G version only) 5.8 7.4 (0.23) (0.29) 6.1 (0.24) 15.5 (0.61) 1.1 (0.04) DIA 0.8 (0.03) 1234 2.5 (0.10) 0.5 (0.02) 0.3 (0.01) mass: approx. 2 g dimensions in mm (inches) Package version GF and AF 9.9 (0.39) 8.9 (0.35) 7.6 (0.30) 4.1 (0.16) 9.9 (0.39) 10.4 (0.41) 2.8 (0.11) P1 0.6 (0.03) Vent hole (P2) (GF version only) 5.8 7.4 (0.23) (0.29) 6.1 (0.24) DIA 3.8 (0.15) 15.5 (0.61) 1.1 (0.04) DIA 2.0 (0.08) DIA 4.8 (0.19) 1234 2.5 (0.10) 0.5 (0.02) 0.3 (0.01) mass: approx. 2 g dimensions in mm (inches) 4/6 June 2008 / 613 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output OUTLINE DRAWING Package version D 9.9 (0.39) 8.9 (0.35) 7.6 (0.30) 2.5 (0.10) 2.5 (0.10) 0.5 (0.02) 4.1 (0.16) 9.9 (0.39) P1 Vent hole (P2) 5.8 (0.23) 7.4 (0.29) 6.1 (0.24) 15.5 (0.61) 1.1 (0.04) DIA 0.8 (0.03) 1234 2.5 (0.10) 0.5 (0.02) 0.3 (0.01) mass: approx. 2 g dimensions in mm (inches) Package version DF 9.9 (0.39) 8.9 (0.35) 7.6 (0.30) 4.1 (0.16) 9.9 (0.39) 10,4 (0.41) 19.8 (0.78) 2.8 (0.11) P1 0.6 (0.03) Vent (P2) 5.8 (0.23) 7.4 (0.29) 6.1 (0.24) DIA 3.8 (0.15) 1.1 (0.04) DIA 2.0 (0.08) DIA 4.8 (0.19) 15.5 (0.61) 1234 2.5 (0.10) 0.5 (0.02) 0.3 (0.01) mass: approx. 2 g dimensions in mm (inches) June 2008 / 613 5/6 www.sensortechnics.com CPC / CPCL Series C-grade Precision compensated pressure sensors / mV-output ORDERING INFORMATION Absolute devices Pressure range No port (A) Axial port (AF) Gage devices No port (G) CPCL04GC ---7 CPC0.3GC ---7 CPC05GC C P C 15A C C P C 30A C ---7 ---7 ---7 C P C 15A F C C P C 30A F C C P C 60A F C C P C 100A F C ---7 ---7 ---7 ---7 CPC100GC ---7 Axial port (GF) CPCL04GFC CPCL10GFC CPC0.3GFC CPC01GFC CPC05GFC CPC15GFC ---7 ---7 CPC100GFC CPC150GFC Differential devices No port (D) C P C L04D C ---7 ---7 ---7 ---7 ---7 ---7 ---7 ---7 ---7 Axial port (DF) C P C L04D F C C P C L10D F C ---7 C P C 01D F C C P C 05D F C C P C 15D F C ---7 C P C 60D F C ---7 C P C 150D F C 4 "H2O 10 "H2O 0.3 psi 1 p si 5 p si 1 5 p si 3 0 p si 6 0 p si 1 0 0 p si 1 5 0 p si Note 7 THESE DEVICES ARE AVAILABLE ON SPECIAL REQUEST. MINIMUM ORDER QUANTITY APPLIES. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 6/6 June 2008 / 613 www.sensortechnics.com