KTU3N01AQ4

厂商：
SENSORTECHNICS
封装：
描述：
KTU3N01AQ4 - OEM pressure transmitters for industrial media - Sensortechnics GmbH

数据手册：

下载KTU3N01AQ4.pdf

立即购买

详情介绍
数据手册
价格&库存

KTU3N01AQ4 数据手册

KTE3000 / KTU3000 Series OEM pressure transmitters for industrial media FEATURES · 0...-1 to 0...50 bar, 0...-15 to 0...750 psi gage1 or absolute · For many industrial gases and liquids · 0...10 V, 0.5...4.5 V, 0...5 V, 1...6 V or 4...20 mA output · Field interchangeable · For industrial use MEDIA COMPATIBILITY Wetted materials: PPS, ceramic Al2O3 and NBR8 Housing: stainless steel 1.4404 (316L), protection class IP 65 (according to DIN EN 60529) respectively NEMA 4X1 SPECIFICATIONS10,11 Maximum ratings ELECTRICAL CONNECTION 0...10 V, 0.5...4.5 V, 0...5 V, 1...6 V output Supply voltage (reverse polarity protection) KTx3...0 13...32 V KTx3...6 9...32 V KTx3...1, ...7 8...32 V KTx3...42 7...32 V Maximum load current Source/Sink Temperature limits Storage Operating Compensated Humidity limits Vibration (5 to 500 Hz) Mechanical shock Proof pressure3 +Vs 1 Vout 3 -Vs 2 13 (8, 9)...32 V Sensor V GND Internal connection (do not connect) 1 mA -40...100°C -25...85°C 0...70°C 0 - 95 %RH 10 gRMS 50 g 2 x rated pressure 4... 20 mA output Sensor +Vs 1 N/C 3 -Vs 2 7...32 V V RL GND Internal connection (do not connect) December 2008 / 626 1/6 www.sensortechnics.com KTE3000 / KTU3000 Series OEM pressure transmitters for industrial media COMMON PERFORMANCE CHARACTERISTICS (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Operating pressure KTE3001... KTE3N01G... KTE3P01G... KTE3002... KTE3005... KTE3010... KTE3016... KTE3020... KTE3025... KTE3035... KTE3050... KTU3015... KTU3N15G... KTU3P15G... KTU3030... KTU3050... KTU3100... KTU3200... KTU3300... KTU3500... KTU3750... Offset Span Offset Span Min. 0 -1 -1 0 0 0 0 0 0 0 0 0 -15 -15 0 0 0 0 0 0 0 Typ. Max. 1 1 0 2 5 10 16 20 25 35 50 15 15 0 30 50 100 200 300 500 750 0.05 0.05 Unit bar p si Thermal effects (0...70°C)4 Thermal effects (-25...0°C, 70...85°C) Long term stability 6 0.02 0.02 0.03 0.03 ±0.1 ±0.3 ±0.04 1 0.005 %FSO/°C Non-linearity, hysteresis (BSL) and repeatability5 Output noise (0 < f < 1 kHz) Response time (10 to 90 %) Power supply rejection ±0.3 %FSO 5 ms %FSO/V Specification notes: IP 65 protection is given when the connector is locked with a rubber washer. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. 2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. 3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 4. Thermal effects tested and guaranteed from 0 to 70°C relative to 25°C. All specifications shown are relative to 25°C. 5. Non-linearity refers to the B est S traight L ine fit measured for offset, full scale span and 1/2 full scale span. 6. Long term stability is the change in output after one year or 1 million pressure cycles. 7. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. 8. Other sealing materials are available on request. 9. Test are in accordance with EN61000-6-2, April 1999. 10. CE-labelling is in accordance with 89/336/EEC. 11. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC. 1. December 2008 / 626 2/6 www.sensortechnics.com KTE3000 / KTU3000 Series OEM pressure transmitters for industrial media INDIVIDUAL PERFORMANCE CHARACTERISTICS 0...10 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span 7 Min. KT...3N... all others KT...3N... all others 4.9 9.9 4.9 Typ. 5 0.03 5 10 3 Max. 5.1 0.1 5.1 10.1 25 5 Unit V Output impedance Current consumption (no load) Ω mA 0.5...4.5 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 Output impedance Current consumption (no load) KT...3N... all others KT...3N... all others Min. 2.45 0.45 1.95 3.95 Typ. 2.5 0.5 2 4 3 Max. 2.55 0.55 2.05 4.05 25 5 Unit V Ω mA 0...5 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 Output impedance Current consumption (no load) KT...3N... all others KT...3N... all others Min. 2.45 2.45 4.95 Typ. 2.5 0.03 2.5 5.0 3 Max. 2.55 0.08 2.55 5.05 25 5 Unit V Ω mA 1...6 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span 7 Min. KT...3N... all others KT...3N... all others 3.45 0.95 2.45 4.95 Typ. 3.5 1 2.5 5.0 3 Max. 3.55 1.05 2.55 5.05 25 5 Unit V Output impedance Current consumption (no load) Ω mA 4...20 mA output (VS = 15 V, RL = 100 Ω, tamb = 25°C) Characteristics Zero pressure offset Full scale span 7 Min. KT...3N... all others KT...3N... all others 11.9 3.9 7.9 15.9 Typ. 12.0 4.0 8.0 16.0 250 Max. 12.1 4.1 8.1 16.1 Unit mA Power consumption (IL = 20 mA) December 2008 / 626 mW 3/6 www.sensortechnics.com KTE3000 / KTU3000 Series OEM pressure transmitters for industrial media OUTPUT CHARACTERISTICS 0...10 V output version 10 Vout V9 8 7 6 5 4 3 2 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure KTx3P... all other KTx3N... 0.5...4.5 V output version 10 Vout 9 V 8 7 6 5 4 3 2 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure KTx3P... all other KTx3N... 0...5 V output version 10 Vout V9 8 7 6 5 4 3 2 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure all other KTx3P... KTx3N... 1...6 V output version 10 Vout V9 8 7 6 5 4 3 2 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure all other KTx3P... KTx3N... 4...20 mA output version 20 Iout 18 mA 16 14 12 KTx3P... 10 8 6 4 2 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure all other KTx3N... December 2008 / 626 4/6 www.sensortechnics.com KTE3000 / KTU3000 Series OEM pressure transmitters for industrial media OUTLINE DRAWING 4.5 (0.18) 12 (0.47) NOM 68 (2.86) 8.5 (0.33) 3 G1/4" (1/4" BSP) 27.0 (1.06) diam. 30 (1.18) 2 1 12 (0.47) vent hole mass: 210 g dimensions in mm (inches) LOAD LIMITATION 4...20 mA output version 1400 Ohm 1200 1000 800 RECOMMENDED ACCESSORY Plug DIN EN 175301-803 A and profile washer included in delivery. For a complete connector/cable assembly use order no. ZK000110-x (x=cable lenghts in m). 50 34 op e ra ratin ng g e 600 400 200 0 5 7 10 16 Profile washer M3 31 dimensions in mm 20 25 30 32 V supply voltage Note: For proper function of all gage devices the gage port must be vented to the atmosphere through the connector/cable assembly. December 2008 / 626 5/6 www.sensortechnics.com KTE3000 / KTU3000 Series OEM pressure transmitters for industrial media ELECTROMAGNETIC CAPABILITY9 Test conditions Criterion Interference Radiated, radio frequency EN61000-4-3: Grade 3, 10 V/m, 80 to 1000 MHz A

下载 PDF

KTU3N01AQ4

1. 物料型号： - KTE3000系列：适用于工业介质的压力变送器，包括多种压力范围和输出类型。 - KTU3000系列：与KTE3000系列相似，但压力范围不同。

2. 器件简介： - 这些变送器适用于许多工业气体和液体，提供多种输出选项（如0...10V、0.5...4.5V、0...5V、1...6V或4...20mA），并可在现场互换使用。

3. 引脚分配： - 文档中提供了不同输出类型的压力变送器的电气连接图，包括0...10V、0.5...4.5V、0...5V、1...6V和4...20mA输出的连接方式。

4. 参数特性： - 供电电压：根据不同型号，供电电压范围从7...32V到13...32V不等。 - 最大负载电流：1mA。 - 温度限制：存储-40...100°C，操作-25...85°C，补偿0...70°C。 - 湿度限制：0-95%RH。 - 振动：5到500Hz，10gRMS。 - 机械冲击：50g。 - 校验压力：额定压力的2倍。

5. 功能详解： - 包括工作压力范围、温度影响、非线性、回差（BSL）和重复性、长期稳定性、输出噪声、响应时间、电源抑制等。

6. 应用信息： - 适用于工业用途，具体应用包括各种工业气体和液体的压力测量。

7. 封装信息： - 外壳材料为316L不锈钢，保护等级为IP65（根据DIN EN 60529）或NEMA 4X。

KTU3N01AQ4 价格&库存

-> 查询更多价格&库存

很抱歉，暂时无法提供与“KTU3N01AQ4”相匹配的价格&库存，您可以联系我们找货

免费人工找货

搜索历史

KTU3N01AQ4

相关技术文章