OLP50U1L3

OLP Series Polysulphone optical liquid level switches FEATURES · Solid state technology, no moving parts · Miniature size, easy to install · Basic, TTL compatibleor transistor output versions · 10, 250 or 500 mA output current · Polysulphone housings · High media compatibility · Fast response, electrically robust WETTED MATERIALS Tip and housing: Polysulphone SPECIFICATIONS Maximum ratings Supply voltage OLP01... OLP25X... OLP25U... OLP50... Supply current OLP01..., OLP25... OLP50... Output current OLP01...* OLP25... OLP50... Operating temperature range OLP01..., OLP50... OLP25... Pressure range OLP...F all others Protection class 5...12 V 5...16 V 10...28 V 10...40 V ELECTRICAL CONNECTION Red +VS Green Output 15 mA 25 mA Blue 10 mA 250 mA 500 mA GND -25 to 80°C -40 to 125°C 20 bar 7 bar IP 67 Note: For basic sensor versions (OLP01B...) suitable resistors have to be selected. See details on page 3. * 10 mA sink current, source current depends on VS and RL September 2008 / 635 1/4 www.sensortechnics.com OLP Series Polysulphone optical liquid level switches PERFORMANCE CHARACTERISTICS Characteristics Repeatability Hysteresis (depending on liquid) Response time rising liquid Response time falling liquid (ethanol) Min. Typ. Max. ±1 1 50 1 Unit mm µs s OUTLINE DRAWING M10 thread (Housing type OLP...F...) 18.70 16.70 4 Ø 12 mass: 5 g M10 x 1.0 Ø 10 +0.10 dimensions in mm M12 thread short (Housing type OLP...K...) 19.40 14.70 6.95 4 19 mass: 6 g Ø 10.40 dimensions in mm M12 x 1.0 29.70 14.70 6.95 4 M12 thread long (Housing type OLP...L...) 19 Ø 10.40 mass: 10 g M12 x 1.0 dimensions in mm Note: All OLP... devices are supplied with lead wires. The wire lengths are 200 mm -0, +30 mm measured from the back of the polysulphone housing. September 2008 / 635 2/4 www.sensortechnics.com OLP Series Polysulphone optical liquid level switches ELECTRICAL CONNECTION (cont.) Basic Red R LED Blue GND Green +VS RP Output Note: Customer has to select suitable resistors for chosen supply voltage. Pull-up resistor RP could be e.g. 10 kΩ depending on desired output. Forward voltage of LED is 1.3 V and LED current should be 10 mA (depending on application liquid). RLED can be calculated as follows (e.g. for VS=12 V): RLED = ( VS − 1.3) V 12 − 1.3 = = 1070 Ω ≈ 1.1 kΩ 10 mA 0.01 TTL compatible (high in air) TTL compatible (low in air) Red +VS 4.7 Red +VS Green Output GND Green Output GND Blue Blue Push-Pull (current sinking and sourcing) Red +VS RL RL Green Output GND Blue September 2008 / 635 3/4 www.sensortechnics.com OLP Series Polysulphone optical liquid level switches ORDERING INFORMATION Basic and TTL compatible output types Output Series Current Options OLP 01B : 01T: Type Function 0: Low i n ai r F: M10 thread K: M12 thread short 3: 3 wire 4: 4 wire* * on request, MOQ may apply Housing type 10 mA basic* Termination 10 mA TTL compatible 1: High in air * Low in air only Example: OLP 01T 0 F 3 Transistor output types Output Series Current Options OLP 25X : 25U : 50U : Type (VS= 5...16 V) Housing type Function 0: Low i n ai r 1: High in air L: M12 thread long 250 mA Push-Pull 250 mA Push-Pull (VS= 10...28 V) Termination 3: 3 wire 4: 4 wire* 500 mA Push-Pull * on request, MOQ may apply Example: OLP 50U 0 L 3 Accessories (please order separately): · Nuts, available in Plastic, Nickel Plated Brass or Stainless Steel · Washers, available in VAMAC (for high temperature) and Nitrile (for standard temperature) Note: Custom specific options are widely available! Please contact your nearest Sensortechnics sales office for further information. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. September 2008 / 635 4/4 www.sensortechnics.com