PS2500GA

PS2000 Series OEM silicon stainless steel pressure sensor FEATURES · 0...5 psi to 0...500 psi gage -15...15 psi to -15...100 psi gage 0...15 psi to 0...500 psi absolute · Calibrated and temperature compensated · Small size · Field interchangeable · Reliable semiconductor technology SERVICE Pressure inlet: all media compatible with stainless steel 1.4401 (316)9 stainless steel, protection class IP65, according to DIN40050 respectively NEMA4X1 Scale: 1 cm 1 inch Housing: ELECTRICAL CONNECTION Connector version 1 +Vs SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Compensated Humidity limits Vibration (5 Hz to 500 Hz) Mechanical shock Life Insulation resistance at 50 VDC 15 V 3 -Vout 2 4 +Vout -Vs/case -55°C to 100°C -40°C to 100°C 0°C to 82°C 0 - 98 %RH 10 gRMS 50 g for 11 msec min. 1 million cycles min. 100 MΩ case Cable version +Vs brown -Vout white +Vout green -Vs yellow case shield/case blank December 2006 / 553 1/5 www.sensortechnics.com PS2000 Series OEM silicon stainless steel pressure sensor PRESSURE RANGE SPECIFICATIONS Part no. PS2005G... PS2010G... PS2015(A,G)... PS2015V... PS2030(A,G)... PS2030V... PS2050(A,G)... PS2100(A,G)... PS2100V... PS2200(A,G)... PS2300(A,G)... PS2500(A,G)... Pressure range 0 ... 5 psig 0 ... 10 psig 0 ... 15 psi -15 ... 15 psig 0 ... 30 psi -15 ... 30 psig 0 ... 50 psi 0 ... 100 psi -15 ... 100 psig 0 ... 200 psi 0 ... 300 psi 0 ... 500 psi Proof pressure2 1 5 p si g 3 0 p si g 4 5 p si 4 5 p si g 9 0 p si 9 0 p si g 1 5 0 p si 3 0 0 p si 3 0 0 p si g 6 0 0 p si 9 0 0 p si 1 2 0 0 p si Burst pressure3 2 5 p si g 4 5 p si g 7 5 p si g 7 5 p si g 1 5 0 p si 1 5 0 p si g 2 5 0 p si 3 0 0 p si 3 0 0 p si g 1 0 0 0 p si 1 5 0 0 p si 2 4 0 0 p si PERFORMANCE CHARACTERISTICS unless otherwise noted, VS = 10,00 V, tamb = 25°C Characteristics Zero pressure offset Full scale span4 Non-linearity5 Pressure hysteresis5 Thermal effects (0°C to 82°C)6 PS2005G... all other devices Thermal hysteresis (0°C to 82°C) Repeatability Long term stability of offset and span7 Response time (10 % to 90 %)8 Input impedance Output impedance Common mode output voltage 8.0 3.0 0.3 Offset Span Offset Span PS2005G... all other devices Min. -2 48 98 Typ. 0 50 100 ±0.1 ±0.015 Max. 2 52 102 ±0.3 ±0.030 ±2.0 ±2.0 ±1.0 ±1.0 ±0.3 ±0.030 ±0.3 Unit mV ±0.5 ±0.5 ±0.1 ±0.010 ±0.1 0.1 25 4.5 %FSO ms 50 6.0 5.0 kΩ V 2/5 December 2006 / 553 www.sensortechnics.com PS2000 Series OEM silicon stainless steel pressure sensor Specification notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. IP65 (NEMA4X) protection is given when the connector is locked. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. The maximum pressure that can be applied without changing the transducer´s performance or accuracy. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer case. Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage Linearity is based on Best fit Straight Line. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the 25°C reading. Long term stability over a one year period. Response time for step change from the zero pressure to the full scale pressure. Other materials on special request. When using devices with optional nickel plated fittings, consider the media compatibility of the fittings also. RECOMMENDED CABLE / CONNECTOR ACCESSORY (Included in delivery!) NOM 2 m 36.5 NOM 60 dimensions in inches (mm) M12 x 1 Ø 20 Pin 1 2 3 4 NC PIN CONNECTION Flying lead end brown green white yellow shield for additional cable/connector assemblies (for connector version PS...GA) use order number ZK000106, other cable length on special request December 2006 / 553 3/5 www.sensortechnics.com PS2000 Series OEM silicon stainless steel pressure sensor OPTIONAL PIPE FITTING DRAWINGS Thread Male Male T1 T2 3/8 NPT 3/8 NPT 3/8 NPT 1/8 NPT 1/4 NPT 1/8 BSP Maximum working pressure (psig) 7200 7200 7200 Part No. SFIT62 SFIT64 SFIT68 W Hex 3/4 3/4 3/4 D in. 1.27 1.45 1.45 mm. 32.3 37.0 37.0 in. 0.56/0.38 0.56 0.56 R mm. 14.2/9.7 14.2 14.2 Material: stainless steel 316 OUTLINE DRAWING Cable version PS...GC 34.0 1" NOM 67 NOM 50 1m SHIELDED CABLE 4 x 0.25 mm² blank: shield brown: +Vsupply white: -output green: +output 3/8" NPT WARNING Do not touch diaphragm WARNING: Do not use case to tighten pressure connection yellow: -Vsupply ELECTRICAL CONNECTION mass: typ. 190 g dimensions in inches (mm) wire color blank brown white green yellow connection shield/case +Vs -Vout +Vout -Vs 4/5 December 2006 / 553 www.sensortechnics.com PS2000 Series OEM silicon stainless steel pressure sensor OUTLINE DRAWING Connector version PS...GA 34.0 27.0 NOM 64 NOM 50 gage vent hole 4 12.0 1 2 3 3/8" NPT WARNING Do not touch diaphragm WARNING: Do not use case to tighten pressure connection ELECTRICAL CONNECTION Pin 1 2 3 4 connection +Vs +Vout -Vout -Vs/case mass: typ. 190 g dimensions in inches (mm) ORDERING INFORMATION PS2 PS2000 Series xxx x x Electrical connections A: C: connector version cable version 005: 010: 01510: 03010: 050: 10010: 200: 300: 500: 0 ... 5 0 ... 10 0 ... 15 0 ... 30 0 ... 50 0 ... 100 0 ... 200 0 ... 300 0 ... 500 psi (gage only) psi (gage only) psi psi psi psi psi psi Note 10: also available as vacuum/gage version psi Pressure mode A: G: V: absolute pressure gage pressure vacuum/gage pressure Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. December 2006 / 553 5/5 www.sensortechnics.com