PS9500GD

PS9000 Series OEM silicon stainless steel pressure sensor FEATURES · 0...5 psi to 0...500 psi gage -15...15 psi to -15...100 psi gage 0...15 psi to 0...500 psi absolute · Calibrated and temperature compensated · Small size · Field interchangeable · Reliable semiconductor technology SERVICE Pressure inlet: all media compatible with stainless steel 1.4401 (316)9 stainless steel, protection class IP54, according to DIN40050 respectively NEMA4X1 Scale: 1 cm 1 inch Housing: ELECTRICAL CONNECTION SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Compensated Humidity limits Vibration (5 Hz to 500 Hz) Mechanical shock Life Insulation resistance at 50 VDC 15 V Vs (1) -55°C to 100°C -40°C to 100°C 0°C to 82°C 0 - 98 %RH 10 gRMS 50 g for 11 msec min. 1 million cycles min. 100 MΩ (3) Output (2) + (4) December 2006 / 541 1/4 www.sensortechnics.com PS9000 Series OEM silicon stainless steel pressure sensor PRESSURE RANGE SPECIFICATIONS Part no. PS9005G... PS9010G... PS9015(A,G)... PS9015V... PS9030(A,G)... PS9030V... PS9050(A,G)... PS9100(A,G)... PS9100V... PS9200(A,G)... PS9300(A,G)... PS9500(A,G)... pressure range 0 ... 5 psig 0 ... 10 psig 0 ... 15 psi -15 ... 15 psig 0 ... 30 psi -15 ... 30 psig 0 ... 50 psi 0 ... 100 psi -15 ... 100 psig 0 ... 200 psi 0 ... 300 psi 0 ... 500 psi proof pressure2 1 5 p si g 3 0 p si g 4 5 p si 4 5 p si g 9 0 p si 9 0 p si g 1 5 0 p si 3 0 0 p si 3 0 0 p si g 6 0 0 p si 9 0 0 p si 1 2 0 0 p si burst pressure3 2 5 p si g 4 5 p si g 7 5 p si g 7 5 p si g 1 5 0 p si 1 5 0 p si g 2 5 0 p si 3 0 0 p si 3 0 0 p si g 1 0 0 0 p si 1 5 0 0 p si 2 4 0 0 p si PERFORMANCE CHARACTERISTICS unless otherwise noted, VS = 10,00 V, tamb = 25°C Characteristics Zero pressure offset Full scale span4 Non-linearity5 Pressure hysteresis5 Thermal effects (0°C to 82°C)6 PS9005G... all other devices Min. -2 48 98 Typ. 0 50 100 ±0.1 ±0.015 Max. 2 52 102 ±0.25 ±0.030 ±2.0 ±2.0 ±1.0 ±1.0 ±0.3 ±0.030 ±0.3 50 6.0 5.0 Unit mV PS9005G... all other devices Offset Span Offset Span Thermal hysteresis (0°C to 82°C) Repeatability Long term stability of offset and span7 Response time (10 % to 90 %)8 Input impedance Output impedance Common mode output voltage 8.0 3.0 0.3 ±0.5 ±0.5 ±0.1 ±0.010 ±0.1 0.1 25 4.5 %FSO ms kΩ V RECOMMENDED MATING CONNECTOR M12 X 1 (order number ZP000112-B) 36.5 Connector NOT included in delivery! M12 x 1 Ø 20 2/4 December 2006 / 541 www.sensortechnics.com PS9000 Series OEM silicon stainless steel pressure sensor Specification notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. IP54 (NEMA4X) protection is given when the connector is locked. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. The maximum pressure that can be applied without changing the transducer´s performance or accuracy. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer case. Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage Linearity is based on Best fit Straight Line. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the 25°C reading. Long term stability over a one year period. Response time for step change from the zero pressure to the full scale pressure. Other materials on special request. When using devices with optional nickel plated fittings, consider the media compatibility of the fittings also. OUTLINE DRAWING NOM 67 (2.64) 6.5 (0.26) G1/8" (1/4") BSP 47 (1.85) 4 vent hole¹ 21.8 (0.86) diam. 1 3 Detail A Detail A ELECTRICAL CONNECTION Pi n 2.3 diam. M12 x 1 connector 2 Connection +Vs Vout+ Vout-Vs 1 2 3 4 o-ring grove for o-ring 11.8 x 1.8 (0.456 x 0.071) (ZA004029) dimensions in mm (inches) December 2006 / 541 3/4 www.sensortechnics.com PS9000 Series OEM silicon stainless steel pressure sensor OPTIONAL PRESSURE FITTINGS male fittings B C female fittings G F A D E H A Dimensions in mm (inches) B C D (Hex.) 8 (0.315) 12 (0.472) 11.5 (0.453) 16 (0.630) 12.5 (0.492) 8.5 (0.335) 12.5 (0.492) 10 (0.394) 14 (0.551) 13 (0.512) 5.5 (0.217) 5 (0.197) 7 (0.276) 11 (0.433) 5 (0.197) 7 (0.276) 13 (0.512) 6 (0.236) 14 (9/16") 14 (9/18") 17 (11/16") 22 (7/8") 14 (9/16") 19 (3/4") 22 (7/8") 17 (11/16") 22 (7/8") E 1/8" BSP 1/4" BSP 3/8" BSP 1/2" BSP Dimensions in mm (inches) F G H (Hex.) 5 (0.197) 7 (0.276) 6 (0.236) 18 (0.707) 15 (0.591) 20 (0.787) 20 (0.787) 23 (0.906) 14 (9/16") 17 (11/16") 22 (7/8") 24 (15/16") 1/8" BSPT 1/4" BSPT 3/8" BSPT 1/2" BSPT 1/8" BSP 1/4" BSP 3/8" BSP 1/8" NPT 1/4" NPT ORDERING INFORMATION PS9 PS9000 Series xxx x x Fitting size D: E: F: G: K: L: M: N: P: Q: R: S: U: V: W: X: Y: 1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 1/8" 1/4" G G G G G G G G BSPT BSPT BSPT BSPT male, male, male, male, brass, brass, brass, brass, nickel nickel nickel nickel plated plated plated plated 005: 010: 01510: 03010: 050: 10010: 200: 300: 500: 0 ... 5 0 ... 10 0 ... 15 0 ... 30 0 ... 50 0 ... 100 0 ... 200 0 ... 300 0 ... 500 psi (gage only) psi (gage only) psi psi psi psi psi psi psi Pressure mode A: G: V: absolute pressure gage pressure vacuum/gage pressure NPT male, brass, nickel plated NPT male, brass, nickel plated NPT male, SS 1.4305 (303) NPT male, SS 1.4305 (303) (BSP) (BSP) (BSP) (BSP) (BSP) (BSP) (BSP) (BSP) male, male, male, male, brass, brass, brass, brass, nickel nickel nickel nickel plated plated plated plated plated plated plated plated 1/8" 1/4" 3/8" 1/2" 1/8" 1/4" 3/8" 1/2" Note 10: also available as vacuum/gage version female, female, female, female, brass, brass, brass, brass, nickel nickel nickel nickel G 1/8" (BSP) male, SS 1.4305 (303) no optional fitting Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. 4/4 December 2006 / 541 www.sensortechnics.com