RBAP005DB

RBA Series Signal conditioned pressure sensors FEATURES · 0...10 inch H2O to 0...100 psi, 0...±5 inch H2O to 0...±100 psi, absolute, gage or differential pressure · 0.5...4.5 V ratiometric output · Precision ASIC signal conditioning · Temperature compensated · Sensortechnics PRO services MEDIA COMPATIBILITY To be used with non-corrosive, non-ionic working fluids such as clean dry air, dry gases and the like. SPECIFICATIONS Maximum ratings Supply voltage VS max. 6.50 VDC Output current Sink Source Lead temperature (2 - 4 sec.) Temperature ranges Compensated Operating Storage Vibration Shock RBAP... RBAH... Caution! The sensors are not reverse polarity protected. Incorrect applications of excitation voltage or ground to the wrong pin can cause electrical failure. Application of supply voltage above the maximum can cause electrical failure. ELECTRICAL CONNECTION 4.75 V to 5.25 VDC N/C 567 1 +Vs 2 mA 2 mA 250 °C 0 to +85 °C -20 to +105 °C -40 to +125 °C 10 g at 20 - 2000 Hz 100 g for 11 ms 50 g for 11 ms RBA 2 Vout 15 nF 3 84 GND 220 nF N/C Note: Capacitor 220 nF required between +Vs and GND and 15 nF between Vout and GND. It is important to place the capacitors as close to the pins as possible! Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason! E / 11717 / A 1/6 www.sensortechnics.com RBA Series Signal conditioned pressure sensors PRESSURE RANGES SPECIFICATIONS (VS = 5.0 VDC, TA = 25°C) Part number RBAH005DB RBAH010DB RBAH010DU RBAP015AU RBAP030AU RBAP100AU RBAP001(G,D)U RBAP005(G,D)U RBAP015(G,D)U RBAP030(G,D)U RBAP100(G,D)U RBAP001DB RBAP005DB RBAP015DB RBAP030DB RBAP100DB Pressure range 0...±5 0...±10 0...10 0...15 0...30 0...100 0...1 0...5 0...15 0...30 0...100 0...±1 0...±5 0...±15 0...±30 0...±100 psi(d) psi(g) psi(a) "H2O Burst pressure1 3 3 3 30 60 150 5 20 30 60 150 5 20 30 60 150 psi(d) psi(g) psi(a) p si Sensitivity (typ.) 0.400 0.200 0.400 0.267 0.133 0.040 4.00 0.80 0.267 0.133 0.040 2.00 0.40 0.133 0.067 0.020 V/psi V/"H2O Specification notes: 1. If maximum burst pressure is exceeded, even momentarily, the package may leak or burst, or the pressure sensing die may fracture. 2. Full Scale Span (FSS) is the algebraic difference between the output signal for the highest and lowest specified pressure. Span is ratiometric to the supply voltage. 3. Total accuracy is the combined error from offset and span calibration, linearity, pressure hysteresis, and temperature effects. Linearity is the measured deviation based on a straight line. Hysteresis is the maximum output difference at any point within the operating pressure range for increasing and decreasing pressure. Calibration errors include the deviation of offset and full scale from nominal values. 4. Delay time between sampling and signal change at the output. 5. The smallest change in the output voltage, given any change in pressure. 6. This is the maximum temperature shift for offset when measured between 0...85 °C relative to the 25 °C reading. E / 11717 / A 2/6 www.sensortechnics.com RBA Series Signal conditioned pressure sensors PERFORMANCE CHARACTERISTICS 0.5 to 4.5 V ratiometric output (VS = 5.0 VDC, TA = 25°C) All RBA...U (unidirectional devices) Characteristics Zero pressure offset Full scale span (FSS) Full scale output Total accuracy (0...85°C) 3 2 Min. 0.40 0.42 4.40 4.42 Typ. 0.50 0.50 4.00 4.50 4.50 Max. 0.60 0.58 Units RBAH010DU all others RBAH010DU all others RBAH010DU all others RBAH010DU all RBAP...GU, ...DU V 4.60 4.58 ±2.5 ±2.0 ±100 ±80 %FSS mV Hz 14.11 ms mV mA Temperature effect on offset6 Sample rate Response delay 4 5 100 2.73 3 6 Quantization step Current consumption All RBA...B (bidirectional devices) Characteristics Zero pressure offset Full scale span (FSS) Output 2 Min. RBAH...DB all others 2.40 2.42 4.40 4.42 0.40 0.42 Typ. 2.50 2.50 4.00 4.50 4.50 0.50 0.50 Max. 2.60 2.58 4.60 4.58 0.60 0.58 ±2.5 ±2.0 ±100 ±80 Units at max. specified pressure at min. specified pressure RBAH...DB all others RBAH...DB all others RBAH...DB all others RBAH...DB all others V Total accuracy (0...85°C) 3 %FSS mV Hz Temperature effect on offset6 Sample rate Response delay 4 5 100 2.73 3 6 14.11 ms mV mA Quantization step Current consumption E / 11717 / A 3/6 www.sensortechnics.com RBA Series Signal conditioned pressure sensors PHYSICAL DIMENSIONS Differential (D) package 1.27 typ (0.050 typ) 16.89 (0.665) 7.87 typ (0.310 typ) 13.97 (0.550) 3.63 (0.143) 8.13 8.89 (0.350) (0.320) 1.78 (0.070) 16.64 ±0.64 (0.655 ±0.025) 2.29 (0.090) High pressure port Low pressure port 3.38 (0.133) 8.26 typ (.325 typ) 0.51 typ (0.02 typ) 2.54 typ (0.100 typ) 4.5 (0.177) Gage (G) package 6.99 (0.275) 3.15 (0.124) 1.27 typ (0.050 typ) 13.97 (0.550) 2 ° typ 16.89 (0.665) 4.9 (0.193) 2.29 typ (0.090 typ) 2.79 typ (0.11 typ) 1.19 typ (0.047 typ) 8.89 5.08 (0.350) (0.200) 16.64 ±0.64 (0.655 ± 0.025) 0.51 typ (0.02 typ) 4.5 (0.177) 2.54 typ (0.100 typ) Absolute (A) package 1.27 typ (0.050 typ) 13.97 (0.550) 16.89 (0.665) 8.46 (0.333) 2.29 typ (0.090 typ) 8.0 typ (0.315 typ) 8.89 (0.350) 0.51 typ (0.02 typ) 2.54 typ (0.100 typ) 16.64 ±0.64 (0.655 ±0.025) 4.5 (0.177) third angle projection dimensions in mm (inches) 4/6 E / 11717 / A www.sensortechnics.com RBA Series Signal conditioned pressure sensors ELECTRICAL CONNECTIONS RBA...DU, RBA...DB Vs (pin 1) identifier N/C N/C N/C N/C +Vs Vout GND N/C RBA...GU Vs (pin 1) identifier +Vs Vout GND N/C N/C N/C N/C N/C RBA...AU Vs (pin 1) identifier N/C N/C N/C N/C +Vs Vout GND N/C Note: Pins 4, 5, 6, 7 and 8 are internal device connections and should not be connected for any reason! TOTAL ACCURACY (-20 to +105°C) For all RBAP... devices 3.0 2.0 1.0 0 -1.0 -2.0 -3.0 -20 0 20 40 60 85 105 Total accuracy (%FSS) Temperature (°C) E / 11717 / A 5/6 www.sensortechnics.com RBA Series Signal conditioned pressure sensors ORDERING INFORMATION - AVAILABLE LISTINGS Note: Preferred listings are highlighted in grey Pressure range Unidirectional (U) 0...10 inch H2O 0...1 psi 0...5 psi 0...15 psi 0...30 psi 0...100 psi Absolute (A) Gage (G) Differential (D) RBAH010DU RBAP001GU RBAP005GU RBAP015AU RBAP030AU RBAP100AU RBAP015GU RBAP030GU RBAP100GU RBAP001DU RBAP005DU RBAP015DU RBAP030DU RBAP100DU RBAH005DB RBAH010DB RBAP001DB RBAP005DB RBAP015DB RBAP030DB RBAP100DB Bidirectional (B) 0...±5 inch H2O 0...±10 inch H2O 0...±1 psi 0...±5 psi 0...±15 psi 0...±30 psi 0...±100 psi Sensortechnics PRO services: · Extended guarantee period of 2 years · Improved performance characteristics · Custom product modifications and adaptations even for small quantities · Advanced logistics models for supply inventory and short delivery times · Technical support through application engineers on the phone or at your site · Fastest possible technical response for design and QA engineers ... plus other services on request Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11717 / A 6/6 www.sensortechnics.com