RQOP015D

RQO Series Temp. compensated and calibrated pressure sensors FEATURES · 0...50 mbar to 0...1 bar and 0...1 to 0...15 psi gage or differential · High impedance bridge · Surface mount miniature package · Usable for wet/wet applications8 · Sensortechnics PRO services MEDIA COMPATIBILITY All media compatible with port 1: - polyphtalamide - silver-filled silicone - silicon nitride - polyphtalamide - fluor-silicone - silicon port 2: SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Lead temperature (10 sec. soldering) Humidity limits Vibration (MIL-STD-202, Meth. 213) 16 V ELECTRICAL CONNECTION +Vs 1 -55 to +100°C -40 to +85°C 260°C 0...100 %RH 4 - Output 2 3 + 150 g half sine 11 ms 150 g Mechanical shock (qualification tested) E / 11706 / A 1/4 www.sensortechnics.com RQO Series Temp. compensated and calibrated pressure sensors PRESSURE SENSOR CHARACTERISTICS (Vs = 10.0 ± 0.01 V, tamb = 25 °C) Part number RQOM050D RQOM100D RQOM250D RQOB001D RQOP001D RQOP005D RQOP015D Operating pressure 0...50 mbar 0...100 mbar 0...250 mbar 0...1 bar 0...1 psi 0...5 psi 0...15 psi Proof pressure1 1.4 bar 1.4 bar 1.4 bar 3 bar 2 0 p si 2 0 p si 6 0 p si Full-scale span (P2 > P1)2 Min. Typ. Max. 10.6 mV 21 mV 34 mV 93 mV 14.7 mV 47 mV 96 mV 12.1 mV 24 mV 36 mV 97 mV 16.7 mV 50 mV 100 mV 13.6 mV 27 mV 38.5 mV 101 mV 18.7 mV 53 mV 104 mV PERFORMANCE CHARACTERISTICS (Vs = 10.0 ± 0.01 V, tamb = 25 °C) Characteristics Zero pressure offset Temperature effects (0 - 50°C)4 Offset Span all devices up to 100 mbar/1 psi all 250 mbar/5 psi devices all other devices Non-linearity (BSL) 3 Min. -0.75 Typ. Max. +0.75 ±1.0 Unit mV ±1.5 ±1.0 ±0.75 ±0.4 ±0.5 ±0.3 ±0.5 ±0.2 ±0.5 5.5 1.5 7.5 2.5 ±4.5 ±1.7 ±1.5 ±1.6 ±1.75 ±1.0 ±1.0 % sp a n 50 mbar device all 100 mbar/1 psi devices 250 mbar device all other devices Repeatability and hysteresis5 Long term stability7 Input impedance Output impedance Response time6 11.5 3.0 1.0 kΩ ms Specification notes: 1. The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. 2. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. 3. Non-linearity refers to the Best Straight Line fit, measured for offset pressure, full scale pressure and 1/2 full scale pressure. 4. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading. 5. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant). Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). 6. Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. 7. Long term stability of offset and span over a period over one year. 8. The sensors might be used on both ports for media compatible with the components specified under "Media Compatibility". E / 11706 / A 2/4 www.sensortechnics.com RQO Series Temp. compensated and calibrated pressure sensors OUTLINE DRAWING third angle projection mass: 0.5 g dimensions in mm (inches) SUGGESTED LAND PATTERN dimensions in mm (inches) E / 11706 / A 3/4 www.sensortechnics.com RQO Series Temp. compensated and calibrated pressure sensors ORDERING INFORMATION - AVAILABLE LISTINGS Note: Preferred listings are highlighted in grey Pressure range 50 mbar 100 mbar 250 mbar 1 bar 1 p si 5 p si 1 5 p si Gage/differential pressure RQOM050D RQOM100D RQOM250D RQOB001D RQOP001D RQOP005D RQOP015D Sensortechnics PRO services: · Extended guarantee period of 2 years · Improved performance characteristics · Custom product modifications and adaptations even for small quantities · Advanced logistics models for supply inventory and short delivery times · Technical support through application engineers on the phone or at your site · Fastest possible technical response for design and QA engineers ... plus other services on request Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11706 / A 4/4 www.sensortechnics.com