RQUB001D

RQU Series Basic pressure sensors FEATURES · 0...50 mbar to 0...1 bar and 0...1 to 0...15 psi gage or differential · High impedance bridge · Surface mount miniature package · Usable for wet/wet applications8 · Sensortechnics PRO services MEDIA COMPATIBILITY All media compatible with port 1: - polyphtalamide - silver-filled silicone - silicon nitride - polyphtalamide - fluor-silicone - silicon port 2: SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Lead temperature (10 sec. soldering) Humidity limits Vibration (0 to 2000 Hz) (qualification tested) Mechanical shock (qualification tested) 12 V ELECTRICAL CONNECTION +Vs 1 -55 to +100°C -40 to +85°C 260°C 0...100 %RH 4 - Output 2 3 + 20 g sine 50 g E / 11705 / A 1/4 www.sensortechnics.com RQU Series Basic pressure sensors PRESSURE SENSOR CHARACTERISTICS (Vs = 10.0 ± 0.01 V, tamb = 25 °C) Part number RQUM050D RQUM100D RQUM250D RQUB001D RQUP001D RQUP005D RQUP015D Operating pressure 0...50 mbar 0...100 mbar 0...250 mbar 0...1 bar 0...1 psi 0...5 psi 0...15 psi Proof pressure1 1.4 bar 1.4 bar 1.4 bar 3 bar 2 0 p si 2 0 p si 4 5 p si Full-scale span2 Min. Typ. Max. 21 mV 43 mV 61 mV 159 mV 30 mV 85 mV 165 mV 33 mV 65 mV 83 mV 218 mV 45 mV 115 mV 225 mV 44 mV 87 mV 105 mV 276 mV 60 mV 145 mV 285 mV PERFORMANCE CHARACTERISTICS (Vs = 10.0 ± 0.01 V, tamb = 25 °C) Characteristics Zero pressure offset Temperature effects (0 to 50°C) 4 Min. -20 Offset Span Typ. ±2.0 -2000 +2200 ±0.25 ±0.15 ±0.5 Max. +20 Unit mV ppm/°C Temperature effects on bridge impedance4 Non-linearity (BSL)3 Repeatability and hysteresis5 Long term stability7 Input impedance Output impedance Response time6 4.0 4.0 % sp a n 6.0 6.0 1.0 5.0 5.0 kΩ ms Specification notes: 1. The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. 2. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. 3. Non-linearity refers to the Best Straight Line fit, measured for offset pressure, full scale pressure and 1/2 full scale pressure. 4. Error band of the offset voltage, span or bridge impedance in the specified temperature range, relative to the 25°C reading. 5. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant). Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). 6. Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. 7. Long term stability of offset and span over a period over one year. 8. The sensors might be used on both ports for media compatible with the components specified under "Media Compatibility". E / 11705 / A 2/4 www.sensortechnics.com RQU Series Basic pressure sensors OUTLINE DRAWING third angle projection mass: 0.5 g dimensions in mm (inches) SUGGESTED LAND PATTERN dimensions in mm (inches) E / 11705 / A 3/4 www.sensortechnics.com RQU Series Basic pressure sensors ORDERING INFORMATION - AVAILABLE LISTINGS Note: Preferred listings are highlighted in grey Pressure range 50 mbar 100 mbar 250 mbar 1 bar 1 p si 5 p si 1 5 p si Gage/differential pressure RQUM050D RQUM100D RQUM250D RQUB001D RQUP001D RQUP005D RQUP015D Sensortechnics PRO services: · Extended guarantee period of 2 years · Improved performance characteristics · Custom product modifications and adaptations even for small quantities · Advanced logistics models for supply inventory and short delivery times · Technical support through application engineers on the phone or at your site · Fastest possible technical response for design and QA engineers ... plus other services on request Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. E / 11705 / A 4/4 www.sensortechnics.com