SRS162PV5L

SRS Valve Manifold mountable plastic switching solenoid valve FEATURES · 3-way, 2 position valve (NO, NC & Distributor) · Design incorporates thermoplastics and non-corrosive metals · Offers high-density manifold mounting with convenient manifold to PC board interface · Weighs only 7 g, perfect where low weight is critical to overall system MEDIA COMPATIBILITY Gases and select liquids PHYSICAL PROPERTIES Operating environment Storage temperature 0 to 70 °C -40 to 70 °C 38 mm (1.5 in) 10 mm (0.394 in) 15.5 mm (0.61 in) Manifold mount, (gasket and screws supplied) 7 g (0.23 oz) 0.0267 cm3 40 µm None required WETTED MATERIALS Length Body: PBT; LNP Thermocomp® Elastomers: FKM Non-corrosive metals: 302 series stainless steel; 430 FR series stainless steel; CMI-B core iron; electroless nickel plating Width Height Porting Weight Internal volume ELECTRICAL Power Voltage 0.5, 1.0 or 2.0 W 5, 12, 24 VDC ± 10% Filtration (recommended) Lubrication Thermocomp® is a registered trademark of General Electric Company. October 2006 / 261 1/5 www.sensortechnics.com SRS Valve Manifold mountable plastic switching solenoid valve PERFORMANCE CHARACTERISTICS Part no. SRS10... SRS11... SRS13... SRS14... SRS16... SRS17... Pressure 0...35 psig 0...85 psig 0...20 psig 0...50 psig 0...10 psig 0...20 psig Vacuum Orifice siz es/ Equivalent CV1 0.020" (0.510 mm)/ 0.0075 CV Leak rate2 R esp o n se 0...27 "Hg (0...13 psi) 0.030" (0.762 mm)/ 0.017 CV 0.045" (1.143 mm)/ 0.027 CV ≤0.016 sccm (bubble tight)