CAWT722-S

Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Specification CAWT722-S SSC Drawn Approval CUSTOMER Approval Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. Feature & Application Absolute Maximum Ratings Electro Characteristics Optical characteristics Color & Binning Rank of CAWT722-S Outline Dimension Packing Soldering 10. Precaution for use 11. Handling of Silicone Resin LEDs 12. Reliability Test Item and Condition Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet CAWT722-S Description This surface-mount LED comes in PLCC standard package dimension. It has a substrate made up of a molded plastic reflector sitting on top of a bent lead frame. The die is attached within the reflector cavity and the cavity is encapsulated by epoxy or silicone. The package design coupled with careful selection of component materials allow these products to perform with high reliability in a larger temperature range -40℃ to 100℃. The high reliability feature is crucial to Automotive interior and Indoor ESS. 사진 CAWT722-S Features • White colored SMT package. • Material : InGaN/SiC • Encapsulating Resin : Silicon Resin • Suitable for all SMT assembly methods ; Suitable for all soldering methods • RoHS Compliant Applications • Interior automotive • Office Automation, Electrical Appliances, Industrial Equipment Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 2. Absolute maximum ratings Parameter Power Dissipation Forward Current Peak Forward Current Reverse Voltage (per die) Operating Temperature Storage Temperature Symbol Pd IF IFM *2 Value 342 90 100 5 -40 ~ +85 -40 ~ +100 Unit mW mA mA V ºC ºC VR Topr Tstg *1 Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. *2 IFM was measured at TW ≤ 1msec of pulse width and D ≤ 1/10 of duty ratio. 3. Electric & Optical characteristics Parameter Forward Voltage (per die) Reverse Current (per die) Luminance Intensity Luminance Flux Color Temperature Color Coordinate Viewing Angle *2 *1 Symbol VF IR IV ΦV CCT X Y 2θ½ Condition IF =60 mA VR=5V IF =60 mA IF =60 mA IF =60 mA IF =60 mA IF =60 mA IF =60 mA IF =60 mA Min 2.9 2500 0.3545 0.3408 - Typ 3.2 4500 11 120 57 95 Max 3.6 10 5500 13.1 4600 0.4970 0.4466 68 Unit V µA mcd lm K deg lm/W - Optical Efficiency Color Rendering Index ηop Ra *1. The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. Luminous Intensity Measurement allowance is ±10% *2. 2θ½ is the off-axis where the luminous intensity is 1/2 of the peak intensity. [Note] All measurements were made under the standardized environment of SSC. Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Forward Current [mA] Relative Luminosity(a.u.) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 4. Optical characteristics Forward Current vs. Forward Voltage (per die) (Ta=25 OC ) 10 1 2.0 2.5 3.0 3.5 4.0 Forward Voltage[V] Relative Luminous Intensity vs Forward Current (Ta=25 OC ) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0 15 30 45 60 75 90 105 120 Forward Current IF[mA] Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Forward Current IF[mA] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 4. Optical characteristics Ambient Temperature vs. Allowable Forward Current (per die) 35 30 25 20 15 10 5 0 -25 0 25 50 O 75 100 Ambient temperature Ta( C) Radiation Diagram (Ta=25 OC ) 0 -30 30 -60 60 -90 90 Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Relative Emission Intensity[a.u.] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 4. Optical characteristics Spectrum (TA=25℃, IF=60mA) 1.0 0.8 0.6 0.4 0.2 0.0 400 500 600 700 800 Wavelength[nm] Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) CIE (y) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 5. Color & Binning 0.9 0.8 0.7 505 515 510 520 525 530 535 540 545 550 555 560 565 570 575 580 585 590 595 600 610 620 630 830 0.6 500 0.5 0.4 0.3 0.2 0.1 0.0 0.0 495 490 485 480 475 470 460 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 CI E(x) Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 5. Color & Binning 0.46 2700K 3000K 0.44 W1 W0 0.42 4000K 3500K V1 V0 VA WA WB T1 T0 TA TB Y 0.40 4500K S1 S0 SA SB 0.38 R1 R0 RA RB VB 0.36 0.34 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 ● COLOR RANK RB X 0.3515 0.35 0.3649 0.3676 SB X 0.3676 0.3649 0.3866 0.391 TB X 0.3898 0.386 0.4106 0.4158 VB X 0.4158 0.4106 0.4307 0.4381 WB Y 0.3841 0.372 0.3768 0.391 X 0.4225 0.4158 0.4381 0.4457 WA Y 0.3716 0.36 0.372 0.3841 X 0.394 0.3898 0.4158 0.4225 VA Y 0.3991 0.3841 0.391 0.4058 Y 0.36 0.3482 0.3618 0.375 X 0.3704 0.3676 0.391 0.3952 TA Y 0.3843 0.3716 0.3841 0.3991 Y 0.3487 0.34 0.3482 0.36 X 0.3531 0.3515 0.3676 0.3704 SA Y 0.3725 0.36 0.375 0.3881 RA Y 0.3605 0.3487 0.36 0.3725 X 4500K R0 X 0.3546 0.3531 0.3704 0.3733 4000K S0 X 0.3733 0.3704 0.3952 0.3997 3500K T0 X 0.3985 0.394 0.4225 0.4283 3000K V0 X 0.4283 0.4225 0.4457 0.4541 2700K W0 Y 0.422 0.4058 0.415 0.43 Y 0.4127 0.3991 0.4058 0.422 Y 0.3983 0.3843 0.3991 0.4127 Y 0.3855 0.3725 0.3881 0.402 Y 0.3717 0.3605 0.3725 0.3855 R1 X 0.3562 0.3546 0.3733 0.376 S1 X 0.376 0.3733 0.3997 0.4044 T1 X 0.4037 0.3985 0.4283 0.4356 V1 X 0.4356 0.4283 0.4541 0.4617 W1 X 0.4617 0.4541 0.4867 0.497 Y 0.4371 0.422 0.43 0.4466 Y 0.4294 0.4127 0.422 0.4371 Y 0.414 0.3983 0.4127 0.4294 Y 0.3974 0.3855 0.402 0.416 Y 0.3826 0.3717 0.3855 0.3974 X Y X Y X 0.4381 0.391 0.4457 0.4058 0.4541 0.4307 0.3768 0.4381 0.391 0.4457 0.4588 0.3838 0.467 0.3979 0.478 0.467 0.3979 0.478 0.415 0.4867 * Measurement Uncertainty of the Color Coordinates : ± 0.01 *The single bin is not acceptable in the same group of CCT. (At least, 2 bins required to take when ordering) Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Y Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 5. Color & Binning 0.46 2700K 3000K 0.44 W1 W0 0.42 4000K 3500K V1 V0 VA WA WB T1 T0 TA TB Y 0.40 4500K S1 S0 SA SB 0.38 R1 R0 RA RB VB 0.36 0.34 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 X 0.46 0.44 0.42 2500K 0.40 2900K 3200K 3700K 0.38 4200K 0.36 4700K 0.34 0.34 0.36 0.38 0.40 0.42 0.44 0.46 0.48 0.50 Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) X Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet L8 M5 N5 L5 M2 N1 6. Rank of CAWT722-S ▣ Rank Name Table X1 X2 X3 IV ▣ Intensity value[mcd] Rank Name Color : R,S MIN MAX CIE VF ▣ Forward Voltage[V] Rank Name ▣ CIE (Color Rank) Rank Name Y3 Z1 Z2 Z3 A1 A2 A3 MIN 2.9 3.0 3.1 3.2 3.3 3.4 3.5 MAX 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3800 4500 5500 4500 5500 6800 R1 R0 RA RB 4500K 4000K 3500K 3000K 2700K S1 S0 SA SB T1 T0 TA TB V1 V0 VA VB W1 W0 WA WB Rank Name Color : T, V, W MIN MAX 3500 4200 5100 4200 5100 6300 Available Rank [Note] All measurements were made under the standardized environment of SSC. In order to ensure availability, single color rank will not be orderable. Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 7.Outline Dimension Packa ge Outlines 6 5 4 Package Mark ing (Ca thode) Fro nt View 1 2 3 Rig ht View Rea r View ( Tolerance: ±0.2, Unit: mm ) Circuit Diagram Recommended Solder Pad Warm White Anode 6 5 4 W1 1 W2 2 W3 3 Warm White Cathode * MATERIALS PARTS Package Encapsulating Resin Electrodes MATERIALS Heat-Resistant Polymer Silicon Resin Ag Plating Copper Alloy Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 8. Packing Package Marking ( Tolerance: ±0.2, Unit: mm ) 1)Quantity : 700pcs/Reel 2)Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm 3)Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at the angle of 10 to the carrier tape 4)Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet ● Reel Packing Structure Reel QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. HUMIDITY INDICATOR DESI PAK Aluminum Vinyl Bag QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. Outer Box Structure Material : Paper(SW3B(B)) TYPE SIZE (mm) c a b 245 220 102 7inch 245 220 142 1 SIDE c TUV MADE IN KOREA QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. Acriche RoHS 1 Semiconductor EcoLight b a Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 9. Soldering (1) Lead Solder Lead Solder Lead Solder Pre-heat Pre-heat time Peak-Temperature Soldering time Condition 120~150℃ 120 sec. Max. 240℃ Max. 10 sec. Max. 2.5~5 C / sec. 2.5~5 o C / sec. Pre-heating 120~150 oC 240 oC Max. 10 sec. Max. 60sec. Max. Above 200 oC 120sec. Max. (2) Lead-Free Solder L ea d -fram e Solder Lead Free Solder Pre-heat Pre-heat time Peak-Temperature Soldering time Condition 150~200℃ 120 sec. Max. 260℃ Max. 10 sec. Max. 1~5 o C / sec. 1~5 o C / sec. Pre-heating 150 ~200 o C 26 0 oC M ax. 1 0 sec. M ax. 60sec. M a x. A b o ve 220 oC 120 sec. M ax. (3) Hand Soldering conditions Do not exceed 4 seconds at maximum 315ºC under soldering iron. (4) The encapsulated material of the LEDs is silicone. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter, the picking up nozzle that does not affect the silicone resign should be used. Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products. Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 10. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5ºC ~30ºC Humidity : maximum 65%RH (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; a. After opened and mounted the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40ºC Humidity : less than 30% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 60±5ºC. (4) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (5) Quick cooling shall be avoided. (6) Components shall not be mounted on warped direction of PCB. (7) Anti radioactive ray design is not considered for the products. (8) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (10) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (11) The LEDs must be soldered within seven days after opening the moisture-proof packing. (12) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (13) The appearance and specifications of the product may be modified for improvement without notice. Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 11. Handling of Silicone Resin LEDs (1) During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound. (2) In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched. (3) When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented. This is assured by choosing a pick and place nozzle which is larger than the LED’s reflector area. (4) Silicone differs from materials conventionally used for the manufacturing of LEDs. These conditions must be considered during the handling of such devices. Compared to standard encapsulants, silicone is generally softer, and the surface is more likely to attract dust. As mentioned previously, the increased sensitivity to dust requires special care during processing. In cases where a minimal level of dirt and dust particles cannot be guaranteed, a suitable cleaning solution must be applied to the surface after the soldering of components. (5) SSC suggests using isopropyl alcohol for cleaning. In case other solvents are used, it must be assured that these solvents do not dissolve the package or resin. Ultrasonic cleaning is not recommended. Ultrasonic cleaning may cause damage to the LED. Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 12. Reliability Test Item and Condition Item Thermal Shock Temperature Cycle High Temperature Storage High Temperature High Humidity Storage Low Temperature Storage Operating Endurance Test High Temperature High Humidity Life Test High Temperature Life Test Low Temperature Life Test ESD(HBM) Reference EIAJ ED4701 EIAJ ED4701 EIAJ ED4701 EIAJ ED4701 EIAJ ED4701 Internal Reference Internal Reference Internal Reference Internal Reference MIL-STD883D Test Condition Ta =-40oC (30MIN) ~ 100oC (30MIN) Ta =-40oC (30MIN) ~ 25oC (5MIN) ~ 100oC (30MIN) ~ 25oC (5MIN) Ta =100oC Duration / Cycle 100 Cycle 100 Cycle 1000 Hours 1000 Hours 1000 Hours 1000 Hours 300 Hours 500 Hours 1000 Hours 3 Time Number of Damage 0/22 0/22 0/22 Ta =85oC, RH=85% 0/22 Ta =-40oC Ta =25oC, IF =20mA 0/22 0/22 Ta =85oC, RH=85%, IF =15mA 0/22 Ta =85oC, IF =20mA Ta =-40oC, IF =20mA 1KV at 1.5kΩ; 100pF 0/22 0/22 0/22 Criteria for Judging the Damage Item Forward Voltage Reverse Current Luminous Intensity Symbol VF IR IV Condition IF =20mA VR=5V IF =20mA Criteria for Judgement MIN LSL*2 × 0.5 MAX USL*1 × 1.2 USL*1 × 2.0 - Note : *1 USL : Upper Standard Level *2 LSL : Lower Standard Level Rev. 02 November 2008 www.ZLED.com SSC-QP-7-07-24 (Rev.00)