LW514-BULK

Z-Power LED X10490 Technical Data Sheet Specification LW514 SSC Drawn CUSTOMER Approval Approval Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6. Optical characteristics 7. Color & Binning 8. Rank of LW514 9. Standard of Taping Empty Space 10. Packing 11. Soldering 12. Precaution for use 13. Reliability Test Item and Condition Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 1. Full Code of LED Series Full code form : X1X2X3X4X5X6X7X8X9 -X10X11 1. Part Number -X1 : Model -X2 : Number of Die *1 -X3 : Color -X4 : Lens Shape -X5 : Directivity -X6 : Revision Symbol -X7 : High Reliability *2 -X8 : Surface coloring & Diffusion *3 -X9 : Stopper *4 *1, 2, 3, 4 are added to the Product Type only in necessary cases. 2. Internal Number -X10 -X11 3. Sticker Diagram on Box & Aluminum Vinyl Bag For more information about binning and labeling, refer to the Application Note -1 Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet LW514 Description Lamp LEDs are effective in hot thermal and humid condition. This high brightness and weatherresistant packaging design makes LW514 Features • High luminous white emission • Non-standoff leads • 5mm package • Viewing angle : 15 º • Color Coordinates : x=0.31 y=0.31 these Lamp LEDs ideal for Outdoor applications such as traffic signals, variable message signs and backlighting for transparent sign panels. Applications • Electronic signs and signals • Specialty lighting • Small area illumination • Torches and head lamps • Backlighting • Outdoor displays Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 3. Absolute maximum ratings Item Symbol Value Unit DC Forward Current IF 30 mA Forward Peak Pulse Current IFP[1] 100 mA Reverse Voltage VR 5 V Power Dissipation PD 114 mW Operating Temperature Topr -40 ~ 100 ℃ Storage Temperature Tstg -40 ~ 100 ℃ Solder Temperature Ts 260ºC for 10second [2] ℃ Notes : [1] t≤0.1ms, D = 1/10 [2] No lower than 3mm from the base of the epoxy bulb. 4. Electro-Optical characteristics Item Symbol Condition Min Typ Max Unit Luminous Intensity[3] IV If=20mA 20000 35000 56000 mcd Luminous Flux ФV If=20mA - 6 - lm Chromaticity Coordinate[4] x, y If=20mA Forward Voltage[5] VF If=20mA View Angle 2θ½ If=20mA Optical Efficiency Ŋelc If=20mA - 93 - lm/W Reverse Current IR VR = 5V - - 5 μA X=0.31, y=0.31 - 3.2 3.8 15 V Deg. [3] SSC maintains a tolerance of ±10% on intensity and power measurements. [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. Color Coordinates Measurement allowance is ± 0.01. [5] A tolerance of ±0.05V on forward voltage measurements [Note] All measurements were made under the standardized environment of SSC. Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 5. Outline Dimensions Unit : mm Notes : Protruded epoxy is 1.0mm maximum. Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 6. Optical characteristics Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 6. Optical characteristics Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 6. Optical characteristics Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 7. Color & Binning Rank a Rank b1 x 0.264 0.280 0.296 0.238 x 0.287 0.283 0.304 0.307 y 0.267 0.248 0.276 0.305 y 0.295 0.305 0.330 0.315 Rank b2 Rank c1 x 0.307 0.304 0.330 0.330 x 0.296 0.287 0.307 0.311 y 0.315 0.330 0.360 0.339 y 0.276 0.295 0.315 0.294 Rank c2 Rank d x 0.311 0.307 0.330 0.330 x 0.330 0.330 0.356 0.361 y 0.294 0.315 0.339 0.318 y 0.360 0.318 0.351 0.385 Note : Color Coordinates Measurement allowance is ±0.01 Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 8. Rank of LW514 Bin Code Luminous Intensity CIE Forward Voltage V c1 40 Luminous Intensity (mcd) @ IF =20mA Bin Code Min. U 20000 28000 V 28000 40000 W 40000 56000 Color Rank @ IF =20mA a Max. b1 b2 c1 c2 d 8. Standard of Taping Empty Space Forward Voltage (V) @ IF =20mA Bin Code Min. Max. 10 2.4 2.6 20 2.6 2.8 30 2.8 3.0 40 3.0 3.2 50 3.2 3.4 60 3.4 3.6 70 3.6 3.8 80 3.8 4.0 90 4.0 4.2 Available Empty Space : 2ea Before After ＊Purpose : Prevention of being Mixed & Reverse mounting ※Before : Insert the right PKG after removing defective product ※After : Attaching the right PKG on the backside after removing defective product Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 10. Packing Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 11. Soldering 1) Wave Soldering Conditions / Profile • Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max). • Soldering heat to be at 255 ºC (260ºC max) for 10 seconds • Soak time above 200 ºC is 5 seconds 2) Hand Soldering conditions • Not more than 3 seconds at max. 350ºC, under Soldering iron. 3) Caution • The LEDs must not be repositioned after soldering. • Do not apply any stress to the lead particularly when heat. Note : In case the soldered products are reused in soldering process, we don’t guarantee the products Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 12. Precaution for Use 1) Storage • Before opening the package Avoid the absorption of moisture, we recommended to store Lamp LEDs in a dry box(or desiccators) with a desiccant . Otherwise, store them in the following environment: Temperature : 5 ℃~30 ℃ Humidity : 50% max. • After opening the package a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40 ℃, Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, Components should be dried for 10-12hr at 60 ±5 ℃ • Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. • Avoid quick cooling • Leadframes are silver plated SPCC. The silver plate surface may be affected by environments which contains corrosive substances. Please avoid conditions which may cause the LEDs to corrode, tarnish or discolor. 2) Lead Forming • When the lead forming is required before soldering , care must be taken to avoid any bending and mechanical stress. The stress to the base may damage the LEDs. • When mounting the LEDs onto a PCB, the holes on the circuit board should be exactly aligned with the leads of the LEDs. • It is recommended that tooling made to precisely form and cut the leads to length rather than rely on hand operating. Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 3) Static Electricity • Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. • All devices, equipment and machinery must be properly grounded. It is recommended precautions be taken against surge voltage to the equipment that mounts the LEDs. 4) Heat Generation • Thermal is one of the important parameter to design the end product. Please consider the heat generation of the LEDs. • The operating current should be decided after considering the ambient maximum temperature of LEDs. 5) Others • The color of the LEDs is changed a little by an operating current and thermal. • Anti radioactive ray design is not considered for the products listed here in. • Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. • This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. • When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5 • The appearance and specifications of the product may be modified for improvement without notice. Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 13. Reliability Test and Condition Item Condition Note Failures Life Test Ta= RT, IF= 30mA 1000hrs 0/22 High Temperature Operating Ta= 85ºC, IF= 8mA 1000hrs 0/22 Low Temperature Operating Ta= -30ºC, IF= 20mA 1000hrs 0/22 Thermal Shock Ta= -40ºC (30min) ~ 100º(30min) (Transfer time : 10sec, 1Cycle = 1hr) 100 cycles 0/40 Resistance to soldering Heat Ts= 255 ±5ºC, t= 10sec 1 time 0/22 ESD (Human Body Model) 1kV, 1.5kΩ; 100pF 1 time 0/22 High Temperature Storage Ta= 100ºC 1000hrs 0/22 Low Temperature Storage Ta= -40ºC 1000hrs 0/22 Temperature Humidity Storage Ta= 85ºC, RH = 85% 1000hrs 0/22 100hrs 0/22 Temperature Humidity Operating Ta= 85ºC, RH = 85%, IF= 8mA < Judging Criteria For Reliability Tests > VF USL[1]X 1.2 IR USL X 2.0 ФV LSL[2]X 0.7 Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level Rev. 02 December 2010 www.seoulsemicon.com 서식번호 : SSC-QP-7-07-24 (Rev.00)